19-123-Y2ST1D-C30-2T [EVERLIGHT]
Chip LED with Bi-Color(Multi-Color); 芯片具有双色LED (多色)型号: | 19-123-Y2ST1D-C30-2T |
厂家: | EVERLIGHT ELECTRONICS CO., LTD |
描述: | Chip LED with Bi-Color(Multi-Color) |
文件: | 总14页 (文件大小:306K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Technical Data Sheet
Chip LED with Bi-Color(Multi-Color)
19-123/Y2ST1D-C30/2T
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Multi-color type.
․Pb-free.
․ESD Protection.
․The product itself will remain within RoHS compliant version.
Descriptions
․The 19-123 SMD LED is much smaller
than lead frame type components, thus
enable smaller board size, higher packing
density, reduced storage space and finally
smaller equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip
Emitted Color
Resin Color
Type
Y2S
Material
AlGaInP
Brilliant Yellow
Pure White
Yellow Diffused
T1
InGaN
Everlight Electronics Co., Ltd.
Device No:DSE-000
http://www.everlight.com
Rev 1
Page: 1 of 14
Prepared date: 4-Sep -2009
Prepared by: Xie Haitao
19-123/Y2ST1D-C30/2T
Package Outline Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No:DSE-000
http://www.everlight.com
Prepared date: 4-Sep -2009
Rev 1
Page: 2 of 14
Prepared by: Xie Haitao
19-123/Y2ST1D-C30/2T
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
VR
Rating
5
Unit
V
Reverse Voltage
Y2S:50
T1:25
Forward Current
IF
mA
mA
mW
V
Peak Forward Current
(Duty 1/10 @1KHz)
Y2S:100
T1:100
Y2S:120
T1:95
IFP
Power Dissipation
Pd
Y2S:2000
T1:2000
-40 ~ +85
-40 ~ +90
Electrostatic Discharge (HBM)
ESD
℃
℃
Operating Temperature
Storage Temperature
Topr
Tstg
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Soldering Temperature
Tsol
Everlight Electronics Co., Ltd.
Device No:DSE-000
http://www.everlight.com
Prepared date: 4-Sep -2009
Rev 1
Page: 3 of 14
Prepared by: Xie Haitao
19-123/Y2ST1D-C30/2T
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
28.5
45.0
-----
Typ.
----
Max.
72.0
112
Unit
mcd
deg
nm
Condition
Iv
Y2S
T1
Luminous Intensity
Viewing Angle
Peak Wavelength
----
2θ1/2
140
-----
λp Y2S
-----
591
-----
IF=5mA
Dominant Wavelength λd Y2S
-----
-----
589
15
-----
-----
nm
nm
Spectrum Radiation
△λ Y2S
Bandwidth
VF
Y2S
T1
1.7
2.7
2.0
----
2.4
3.2
Forward Voltage
Reverse Current
V
VR=5V
IR
Y2S
-----
-----
10
μA
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Forward Voltage ±0.05V
Everlight Electronics Co., Ltd.
Device No:DSE-000
http://www.everlight.com
Prepared date: 4-Sep -2009
Rev 1
Page: 4 of 14
Prepared by: Xie Haitao
19-123/Y2ST1D-C30/2T
Y2S
Bin Range Of Luminous Intensity
Bin
N
Min
28.5
45.0
Max
45.0
72.0
Unit
mcd
Condition
IF =5mA
P
T1
Bin Range Of Luminous Intensity
Bin
P
Min
45.0
72.0
Max
72.0
112
Unit
mcd
Condition
IF =5mA
Q
Bin Range Of Luminous Voltage
Group
Bin
29
30
31
32
33
Min
2.70
2.80
2.90
3.00
3.10
Max
2.80
2.90
3.00
3.10
3.20
Unit
V
Condition
IF =5mA
Q
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Forward Voltage ±0.05V
Everlight Electronics Co., Ltd.
Device No:DSE-000
http://www.everlight.com
Prepared date: 4-Sep -2009
Rev 1
Page: 5 of 14
Prepared by: Xie Haitao
19-123/Y2ST1D-C30/2T
Chromaticity Coordinates Specifications for Bin Grading
Groups
Bin Code
CIE_x
CIE_y
Condition
0.274
0.274
0.294
0.294
0.274
0.274
0.294
0.294
0.294
0.294
0.314
0.314
0.294
0.294
0.314
0.314
0.226
0.258
0.286
0.254
0.258
0.291
0.319
0.286
0.254
0.286
0.315
0.282
0.286
0.319
0.347
0.315
1
2
3
4
C
IF=5mA
Notes:
1.The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01) .
2.The products are sensitive to static electricity and care must be fully taken when
handling products.
Everlight Electronics Co., Ltd.
Device No:DSE-000
http://www.everlight.com
Prepared date: 4-Sep -2009
Rev 1
Page: 6 of 14
Prepared by: Xie Haitao
19-123/Y2ST1D-C30/2T
CIE Chromaticity Diagram
Everlight Electronics Co., Ltd.
Device No:DSE-000
http://www.everlight.com
Prepared date: 4-Sep -2009
Rev 1
Page: 7 of 14
Prepared by: Xie Haitao
19-123/Y2ST1D-C30/2T
Typical Electro-Optical Characteristics Curves
Y2S
Everlight Electronics Co., Ltd.
Device No:DSE-000
http://www.everlight.com
Prepared date: 4-Sep -2009
Rev 1
Page: 8 of 14
Prepared by: Xie Haitao
19-123/Y2ST1D-C30/2T
Typical Electro-Optical Characteristics Curves
T1
Everlight Electronics Co., Ltd.
Device No:DSE-000
http://www.everlight.com
Prepared date: 4-Sep -2009
Rev 1
Page: 9 of 14
Prepared by: Xie Haitao
19-123/Y2ST1D-C30/2T
Label explanation
CAT: Luminous Intensity Rank
Pb
EVERLIGHT
HUE: Chromaticity Coordinates
REF: Forward Voltage Rank
CPN :
P
N : XXXXXXXXXXXXX
RoHS
XXXXXXXXXXXXX
QTY : XXX
CAT : XXX
HUE : XXX
REF : XXX
LOT NO : XXXXXXXXXX
Reference : XXXXXXXX
MADE IN TAIWAN
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No:DSE-000
http://www.everlight.com
Prepared date: 4-Sep -2009
Rev 1
Page: 10 of 14
Prepared by: Xie Haitao
19-123/Y2ST1D-C30/2T
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Aluminum moisture-proof bag
Label
Desiccant
Label
Everlight Electronics Co., Ltd.
Device No:DSE-000
http://www.everlight.com
Prepared date: 4-Sep -2009
Rev 1
Page: 11 of 14
Prepared by: Xie Haitao
19-123/Y2ST1D-C30/2T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
Test
Hours/Cycles
Sample
Size
No.
1
Items
Test Condition
Ac/Re
0/1
Temp. : 260℃±5℃
Reflow Soldering
22 PCS.
6 Min.
Min. 5sec.
H : +100℃ 15min
300 Cycles
300 Cycles
2
Temperature Cycle
Thermal Shock
22 PCS.
0/1
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
3
4
22 PCS.
22 PCS.
0/1
0/1
∫ 10 sec
L : -10℃ 5min
High Temperature
Storage
Low Temperature
Storage
1000 Hrs.
1000 Hrs.
Temp. : 100℃
Temp. : -40℃
5
6
7
22 PCS.
22 PCS.
22 PCS.
0/1
0/1
0/1
DC Operating Life
IF = 20 mA
1000 Hrs.
1000 Hrs.
High Temperature /
High Humidity
85℃/ 85%RH
Everlight Electronics Co., Ltd.
Device No:DSE-000
http://www.everlight.com
Prepared date: 4-Sep -2009
Rev 1
Page: 12 of 14
Prepared by: Xie Haitao
19-123/Y2ST1D-C30/2T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
Device No:DSE-000
http://www.everlight.com
Prepared date: 4-Sep -2009
Rev 1
Page: 13 of 14
Prepared by: Xie Haitao
19-123/Y2ST1D-C30/2T
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within
once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand
whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No:DSE-000
http://www.everlight.com
Prepared date: 4-Sep -2009
Rev 1
Page: 14 of 14
Prepared by: Xie Haitao
相关型号:
19-123/Y2ST1D-C30/2T
Dual Color LED, Brilliant Yellow/pure White, Diffused Yellow, 1.5mm, ROHS COMPLIANT, SMD, 4 PIN
EVERLIGHT
19-130040
ConverterPACs are the family of slide-in output assemblies used in MegaPAC power supplies
VICOR
19-130041
ConverterPACs are the family of slide-in output assemblies used in MegaPAC power supplies
VICOR
19-130042
ConverterPACs are the family of slide-in output assemblies used in MegaPAC power supplies
VICOR
©2020 ICPDF网 联系我们和版权申明