37-01/R7C-ARTC-AM32S [EVERLIGHT]
Single Color LED, Brilliant Red, Water Clear, 3.9mm, ROHS COMPLIANT, PLASTIC PACKAGE-4;
| 型号： | 37-01/R7C-ARTC-AM32S |
| 厂家： | 
EVERLIGHT ELECTRONICS CO., LTD |
| 描述： | Single Color LED, Brilliant Red, Water Clear, 3.9mm, ROHS COMPLIANT, PLASTIC PACKAGE-4 |
| 文件： | 总9页 (文件大小：251K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Technical Data Sheet
Oval POWER LED
37-01/R7C-ARTC-AM
Features
. High Flux Output.
. Designed for High Current Operation.
. Low Thermal Resistance Rth(junction to lead):120°C/W
. Packaged in Tubes for Use with Automatic
Insertion Equipment.
.The product itself will remain within RoHS compliant version.
. Viewing angle 38×85degree
Descriptions
This revolutionary package design allows the light designer to reduce the number of LEDs required
and provide a more uniform and unique illuminated appearance than with other LED solutions. This
is possible through the efficient optical package design and high-current capabilities.
The low profile package can be easily coupled with reflectors or lenses to efficiently distribute light
and provide the desired light appearance.
Applications
. Automotive Lighting
. Electronic Signs and Signals
. Special Lighting application
Device Selection Guide
Chip
PART NO.
Lens Color
Material
Emitted Color
Brilliant Red
37-01/R7C-ARTC-AM
AlInGaP
Water Clear
Everlight Electronics Co., Ltd.
Device number: DPE-0000047
http://www.everlight.com
Rev. 1
Page: 1 of 9
Established date: 02-18-2009
Established by: Ken Lee
Technical Data Sheet
Oval POWER LED
37-01/R7C-ARTC-AM
Package Dimensions
C1 .25
R0 .7 ±0 .2
C
LED ch ip
A
ANODE / C CATHODE
C (- )
C (- )
C
A
A
A (+ )
A(+ )
7 .62 ±0 .5
3 .9 ×3 .15 ±0 .2
3 .9 ±0 .2
3 .15 ±0 .2
1 .55 ±0 .2
0 .75 ±0 .2
0 .4 ±0 .1
2 .54 ±0 .15
2 .54 ±0 .1
5 .08 ±0 .3
5 .08 ±0 .2
Notes: 1.All dimensions are in millimeters
2.An epoxy meniscus may extend about 1.5mm(0.059") down the leads
3.Tolerances unless dimensions ±0.25mm
Absolute Maximum Ratings (Ta=25℃)
Parameter
Continuous Forward Current
Peak Forward Current(Duty 1/10 @ 1KHZ)
Reverse Voltage
Symbol
IF
Rating
Units
mA
mA
V
70
160
IFP
VR
5
℃
Operating Temperature
Topr
Tstg
Tsol
Tj
-40 ~ +100
-40 ~ +100
260
℃
Storage Temperature
℃
Soldering Temperature(T=5 sec)
LED Junction Temperature
Power Dissipation
℃
120
mW
V
Pd
220
Electrostatic Discharge
ESD
2K
Everlight Electronics Co., Ltd.
Device number: DPE-0000047
http://www.everlight.com
Rev. 1
Page: 2 of 9
Established date: 02-18-2009
Established by: Ken Lee
Technical Data Sheet
Oval POWER LED
37-01/R7C-ARTC-AM
Electro-Optical Characteristics (Ta=25℃)
Parameter
Total Flux
Symbol
Φv
Min.
4500
----
Typ.
----
Max.
9000
----
Condition
Unit
mlm
deg
nm
I
F
=70mA
=70mA
=70mA
=70mA
2θ1/2
λp
38×85
632
IF
Viewing Angle
----
----
IF
Peak Wavelength
Dominant Wavelength
λd
620
----
632
IF
nm
Spectrum Radiation
Bandwidth
△λ
----
20
----
IF=70mA
nm
V
F
1.9
----
2.4
----
3.1
10
I
F
=70mA
V
Forward Voltage
Reverse Current
IR
VR=5V
µA
Rank
37-01/R7C-ARTC-AM
(1)
(2)
(3)
(2) λd(nm)
(3)Φv(mlm)
(1)
VF(V)
Bin
2
Min
1.9
2.1
2.3
2.5
2.7
2.9
Max
Bin
Min
Max
624
628
632
Bin
R
Min
4500
5650
7150
Max
5650
7150
9000
2.1
2.3
2.5
2.7
2.9
3.1
2
3
4
620
624
628
3
S
4
T
5
6
7
*Measurement Uncertainty of Forward Voltage: 0.1V
*Measurement Uncertainty of Total Flux: 11%
*Measurement Uncertainty of Dominant Wavelength: 1.0nm
Everlight Electronics Co., Ltd.
Device number: DPE-0000047
http://www.everlight.com
Established date: 02-18-2009
Rev. 1
Page: 3 of 9
Established by: Ken Lee
Technical Data Sheet
Oval POWER LED
37-01/R7C-ARTC-AM
Typical Electro-Optical Characteristics Curves
Relative Intensity vs. Wavelength
Forward Current vs. Forward Voltage
1.00
80
60
40
20
0.50
0
1.40 1.60 1.80 2.00 2.20 2.40 2.60 2.80 3.00 3.20
FORWARD VOLTAGE (V)
0.00
580
600
620 640
WAVELENGTH (nm)
660
680
Relative Intensity vs. Forward Current
Forward Current vs. Ambient Temp.
1.00
80
70
60
50
40
30
20
10
0
0.80
0.60
0.40
0.20
0.00
0
20 40 60 80 100 120 140
AMBIENT TEMPERATURE (C)
0
10
20
30
40
50
FORWARD CURRENT (mA)
60
70
Relative Intensity vs. Angle Displacement
00
100
200
1.0
300
400
0.8
0.6
0.4
0.2
0.0
500
600
700
800
900
-900
-300
Viewing angle (degree)
-700 -500
-100
Everlight Electronics Co., Ltd.
Device number: DPE-0000047
http://www.everlight.com
Established date: 02-18-2009
Rev. 1
Page: 4 of 9
Established by: Ken Lee
Technical Data Sheet
Oval POWER LED
37-01/R7C-ARTC-AM
Packing Specification
1. Tube
Cross section image of tube
Unit: mm
Tube Label
Whole image of tube
ANTISTATIC
2. Inner Box
Box Label
Everlight Electronics Co., Ltd.
Device number: DPE-0000047
http://www.everlight.com
Established date: 02-18-2009
Rev. 1
Page: 5 of 9
Established by: Ken Lee
Technical Data Sheet
Oval POWER LED
37-01/R7C-ARTC-AM
3. Outside Box
Box Label
4. Packing Quantity
(1) 60 pcs/1 tube, 30 tubes/1 small inside box, 12 small inside boxes/1 outside box
(2) 60 pcs/1 tube, 105 tubes/1 big inside box, 4 big inside boxes/1 outside box
Label Form Specification
(1)Tube Label Form
PART NO: 37-01/R7C-ARTC-AM QTY: 60
LOT NO:
CAT:
(2)Box Label Form
PART NO: Everlgiht’s Production Number
QTY: Packing Quantity
EVERLIGHT
CPN:
P/N:
LOT NO: Lot Number
CAT: Ranks of Forward Voltage, Dominant
Wavelength and Total Flux
CPN: Customer’s Production Number
P/N : Production Number
RoHS
37-01/R7C-ARTC-AM
QTY：
CAT:
HUE:
REF:
HUE: Reference
LOT NO：
REF: Reference
MADE IN TAIWAN: Production Place
MADE IN TAIWAN
Everlight Electronics Co., Ltd.
Device number: DPE-0000047
http://www.everlight.com
Rev. 1
Page: 6 of 9
Established date: 02-18-2009
Established by: Ken Lee
Technical Data Sheet
Oval POWER LED
37-01/R7C-ARTC-AM
Notes
1. Lead Forming
ꢀ
During lead formation, the leads should be bent at a point at least 3mm from the base of the
epoxy bulb.
ꢀ
ꢀ
Lead forming should be done before soldering.
Avoid stressing the LED package during leads forming. The stress to the base may damage
the LED’s characteristics or it may break the LEDs.
ꢀ
ꢀ
Cut the LED leadframes at room temperature. Cutting the leadframes at high temperatures
may cause failure of the LEDs.
When mounting the LEDs onto a PCB, the PCB holes must be aligned exactly with the lead
position of the LED. If the LEDs are mounted with stress at the leads, it causes
deterioration of the epoxy resin and this will degrade the LEDs.
2. Storage
ꢀ
ꢀ
The LEDs should be stored at 30°C or less and 70%RH or less after being shipped from
Everlight and the storage life limits are 3 months. If the LEDs are stored for 3 months or
more, they can be stored for a year in a sealed container with a nitrogen atmosphere and
moisture absorbent material.
Please avoid rapid transitions in ambient temperature, especially, in high humidity
environments where condensation can occur.
3. Soldering
ꢀ
ꢀ
ꢀ
Careful attention should be paid during soldering. Solder the LED no lower than 1.6mm
from the base of stopper is recommended.
Avoiding applying any stress to the lead frame while the LEDs are at high temperature
particularly when soldering.
Recommended soldering conditions:
Hand Soldering
DIP Soldering
Temp. at tip of iron
Soldering time
Distance
300 Max. (30W Max.)
3 sec Max.
Preheat temp.
Bath temp.
100 Max. (60 sec Max.)
260 Max.
No lower than 1.6mm from Bath time.
the base of stopper
5 sec Max.
Distance
No lower than 1.6mm from
the base of stopper
Everlight Electronics Co., Ltd.
Device number: DPE-0000047
http://www.everlight.com
Rev. 1
Page: 7 of 9
Established date: 02-18-2009
Established by: Ken Lee
Technical Data Sheet
Oval POWER LED
37-01/R7C-ARTC-AM
ꢀ
ꢀ
Dip and hand soldering should not be done more than one time.
After soldering the LEDs, the epoxy bulb should be protected from mechanical shock or
vibration until the LEDs return to room temperature.
ꢀ
A rapid-rate process is not recommended for cooling the LEDs down from the peak
temperature.
ꢀ
ꢀ
Although the recommended soldering conditions are specified in the above table, dip or
handsoldering at the lowest possible temperature is desirable for the LEDs.
Wave soldering parameter must be set and maintain according to recommended
temperature and dwell time in the solder wave.
4. Cleaning
ꢀ
When necessary, cleaning should occur only with isopropyl alcohol at room temperature for
a duration of no more than one minute. Dry at room temperature before use.
Do not clean the LEDs by the ultrasonic. When it is absolutely necessary, the influence of
ultrasonic cleaning on the LEDs depends on factors such as ultrasonic power and the
assembled condition. Ultrasonic cleaning shall be pre-qualified to ensure this will not cause
damage to the LED
ꢀ
5. Circuit Protection
ꢀ
Below the zener reference voltage Vz, all the current flows through LED and as the voltage
rises to Vz, the zener diode “breakdown." If the voltage tries to rise above Vz current flows
through the zener branch to keep the voltage at exactly Vz.
ꢀ
When the LED is connected using serial circuit, if either piece of LED is no light up but
current can’t flow through causing others to light down. In new design, the LED is parallel
with zener diode. if either piece of LED is no light up but current can flow through causing
others to light up.
6. Heat Management
ꢀ
Heat management of LEDs must be taken into consideration during the design stage of
LED application. The current should be de-rated appropriately by referring to the de-rating
curve found in each product specification.
ꢀ
The temperature surrounding the LED in the application should be controlled. Please refer
to the data sheet de-rating curve.
7. ESD (Electrostatic Discharge)
ꢀ
ꢀ
Electrostatic discharge (ESD) or surge current (EOS) can damage LEDs.
An ESD wrist strap, ESD shoe strap or antistatic gloves must be worn whenever handling
Everlight Electronics Co., Ltd.
Device number: DPE-0000047
http://www.everlight.com
Rev. 1
Page: 8 of 9
Established date: 02-18-2009
Established by: Ken Lee
Technical Data Sheet
Oval POWER LED
37-01/R7C-ARTC-AM
LEDs.
ꢀ
All devices, equipment and machinery must be properly grounded.
ꢀ
Use ion blower to neutralize the static charge which might have built up on surface of the
LEDs plastic lens as a result of friction between LEDs during storage and handing.
8. Other
ꢀ
Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification.
ꢀ
ꢀ
When using this product, please observe the absolute maximum ratings and the instructions
for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for
any damage resulting from use of the product which does not comply with the absolute
maximum ratings and the instructions included in these specification sheets.
These specification sheets include materials protected under copyright of EVERLIGHT
corporation. Please don’t reproduce or cause anyone to reproduce them without
EVERLIGHT’s consent.
EVERLIGHT ELECTRONICS CO., LTD.
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Everlight Electronics Co., Ltd.
http://www.everlight.com
Established date: 02-18-2009
Rev. 1
Page: 9 of 9
Device number: DPE-0000047
Established by: Ken Lee
相关型号：
37-01/R7C-ARTC-AM33R
Single Color LED, Brilliant Red, Water Clear, 3.9mm, ROHS COMPLIANT, PLASTIC PACKAGE-4
EVERLIGHT
37-01/R7C-ARTC-AM42S
Single Color LED, Brilliant Red, Water Clear, 3.9mm, ROHS COMPLIANT, PLASTIC PACKAGE-4
EVERLIGHT
37-01/R7C-ARTC-AM43R
Single Color LED, Brilliant Red, Water Clear, 3.9mm, ROHS COMPLIANT, PLASTIC PACKAGE-4
EVERLIGHT
37-01/R7C-ARTC-AM43S
Single Color LED, Brilliant Red, Water Clear, 3.9mm, ROHS COMPLIANT, PLASTIC PACKAGE-4
EVERLIGHT
37-01/R7C-ARTC-AM43T
Single Color LED, Brilliant Red, Water Clear, 3.9mm, ROHS COMPLIANT, PLASTIC PACKAGE-4
EVERLIGHT
37-01/R7C-ARTC-AM44S
Single Color LED, Brilliant Red, Water Clear, 3.9mm, ROHS COMPLIANT, PLASTIC PACKAGE-4
EVERLIGHT
37-01/R7C-ARTC-AM52T
Single Color LED, Brilliant Red, Water Clear, 3.9mm, ROHS COMPLIANT, PLASTIC PACKAGE-4
EVERLIGHT
37-01/R7C-ARTC-AM53S
Single Color LED, Brilliant Red, Water Clear, 3.9mm, ROHS COMPLIANT, PLASTIC PACKAGE-4
EVERLIGHT
37-01/R7C-ARTC-AM54R
Single Color LED, Brilliant Red, Water Clear, 3.9mm, ROHS COMPLIANT, PLASTIC PACKAGE-4
EVERLIGHT
37-01/R7C-ARTC-AM54S
Single Color LED, Brilliant Red, Water Clear, 3.9mm, ROHS COMPLIANT, PLASTIC PACKAGE-4
EVERLIGHT
37-01/R7C-ARTC-AM54T
Single Color LED, Brilliant Red, Water Clear, 3.9mm, ROHS COMPLIANT, PLASTIC PACKAGE-4
EVERLIGHT
37-01/R7C-ARTC-AM63R
Single Color LED, Brilliant Red, Water Clear, 3.9mm, ROHS COMPLIANT, PLASTIC PACKAGE-4
EVERLIGHT
©2020 ICPDF网 联系我们和版权申明