59-23UTD/TR8 [EVERLIGHT]
Single Color LED, White, Diffused Yellow, T-1, 3.2mm, ROHS COMPLIANT, SMD, 6 PIN;
| 型号： | 59-23UTD/TR8 |
| 厂家： | 
EVERLIGHT ELECTRONICS CO., LTD |
| 描述： | Single Color LED, White, Diffused Yellow, T-1, 3.2mm, ROHS COMPLIANT, SMD, 6 PIN 光电 |
| 文件： | 总10页 (文件大小：162K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
Luminosity white Color LED
59-23 UTD/TR8
Features
․Super luminosity white LED.
․Built in 3 LED chips.
․Wide viewing angle.
․Soldering methods: Reflow soldering.
․High performance.
․Package in 12mm tape on 7〞diameter reel.
․Pb-free.
․The product itself will remain within RoHS
compliant version.
Descriptions
․The 59-23 SMD Taping is much smaller than
lead frame type components, thus enable smaller
board size, higher packing density, reduced
storage space and finally smaller equipment to be
obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Amusement equipment.
․Information boards.
․Flashlight for digital camera of cellular phone.
․Lighting for small size device.
Device Selection Guide
Chip
Lens Color
Material
Emitted Color
InGaN
White
Yellow diffused
Everlight Electronics Co., Ltd.
Device No.: DSE-593-001
http://www.everlight.com
Prepared date: 14-Oct-2006
Rev. 1
Page: 1 of 10
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
59-23 UTD/TR8
Package Outline Dimensions
0.25
6-R0.5
(1)
(2)
(3)
(4)
(5)
(6)
0.3
5.0
1.3
1.3
1.3
1.5
0.1 0.45
0.45
0.1
(3)
(1)
(2)
(6)
(4)
(5)
1.3
1.3
1.3
0.45
0.45
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No.: DSE-593-001
http://www.everlight.com
Prepared date: 14-Oct-2006
Rev. 1
Page: 2 of 10
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
59-23 UTD/TR8
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
Operating Temperature
Storage Temperature
Electrostatic Discharge (HBM)
Power Dissipation
VR
Topr
Tstg
ESD
Pd
5
-25 ~ +80
-30 ~ +90
1000
V
℃
℃
V
111
mW
mA
30
Forward Current
IF
Peak Forward Current
(Duty 1/10 @ 0.2HZ)
100
IFP
mA
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Soldering Temperature
Tsol
* The value are base d on the 1-die performance.
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
Typ.
Max.
10.0
Unit
cd
Condition
3.0
5.0
IF=20mA*2
Luminous Intensity*1
Iv
IFP=100mA*2
(Duty 1/10 @ 400ms)
7.0
15.0
60
35.0
-----
2θ1/2
Viewing Angle*1
Forward Voltage*2
-----
deg
V
IF=20mA*2
IF=20mA*2
2.7
3.6
3.3
4.4
3.7
5.2
50
VF
IFP=100mA*2
(Duty 1/10 @ 400ms)
Forward Voltage*2
Reverse Current*2
μA
VR=5V*2
IR
-----
-----
*1 When 3 LED dies are operated simultaneously.
*2 For each die.
Note: The products are sensitive to static electricity and care must be fully taken when
handling products.
Everlight Electronics Co., Ltd.
Device No.: DSE-593-001
http://www.everlight.com
Prepared date: 14-Oct-2006
Rev. 1
Page: 3 of 10
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
59-23 UTD/TR8
Color Ranks
Rank A0
Rank B3
x
y
0.280
0.248
0.264
0.283
0.305
0.296
0.276
x
y
0.287
0.295
0.283
0.304
0.330
0.307
0.315
0.267
0.305
Rank B4
Rank B5
x
y
0.307
0.315
0.304
0.330
0.330
0.360
0.330
0.339
x
y
0.296
0.276
0.287
0.295
0.307
0.315
0.311
0.294
Rank B6
Rank C0
x
y
0.311
0.294
0.307
0.315
0.330
0.339
0.330
0.318
x
y
0.330
0.318
0.330
0.360
0.361
0.385
0.356
0.351
*The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01).
CIE Chromaticity Diagram
Everlight Electronics Co., Ltd.
Device No.: DSE-593-001
http://www.everlight.com
Prepared date: 14-Oct-2006
Rev. 1
Page: 4 of 10
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
59-23 UTD/TR8
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd.
Device No.: DSE-593-001
http://www.everlight.com
Prepared date: 14-Oct-2006
Rev. 1
Page: 5 of 10
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
59-23 UTD/TR8
Label explanation
CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No.: DSE-593-001
http://www.everlight.com
Prepared date: 14-Oct-2006
Rev. 1
Page: 6 of 10
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
59-23 UTD/TR8
Carrier Tape Dimensions: Taping Quantity: 800pcs
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Aluminum moisture-proof bag
Label
Desiccant
Label
Everlight Electronics Co., Ltd.
Device No.: DSE-593-001
http://www.everlight.com
Prepared date: 14-Oct-2006
Rev. 1
Page: 7 of 10
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
59-23 UTD/TR8
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level：90%
LTPD：10%
Test
Hours/Cycles
Sample
Ac/Re
Size
No.
1
Items
Test Condition
Temp. : 260℃±5℃
Reflow Soldering
22 PCS.
0/1
6 Min.
Min. 5sec.
H : +100℃ 15min
300 Cycles
2
Temperature Cycle
Thermal Shock
22 PCS.
0/1
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
300 Cycles
3
4
22 PCS.
22 PCS.
0/1
0/1
∫ 10 sec
L : -10℃ 5min
High Temperature
Storage
Low Temperature
Storage
1000 Hrs.
1000 Hrs.
Temp. : 100℃
Temp. : -40℃
5
6
7
22 PCS.
22 PCS.
22 PCS.
0/1
0/1
0/1
DC Operating Life
IF = 20 mA
1000 Hrs.
1000 Hrs.
High Temperature /
High Humidity
85℃/ 85%RH
Everlight Electronics Co., Ltd.
Device No.: DSE-593-001
http://www.everlight.com
Prepared date: 14-Oct-2006
Rev. 1
Page: 8 of 10
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
59-23 UTD/TR8
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
Device No.: DSE-593-001
http://www.everlight.com
Prepared date: 14-Oct-2006
Rev. 1
Page: 9 of 10
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
59-23 UTD/TR8
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable,
a double-head soldering iron should be used (as below figure). It should be confirmed beforehand
whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No.: DSE-593-001
http://www.everlight.com
Prepared date: 14-Oct-2006
Rev. 1
Page: 10 of 10
Prepared by: Jeff Tsai
相关型号：
©2020 ICPDF网 联系我们和版权申明