6374/Y7DA-ALNB/P/MS [EVERLIGHT]
Single Color LED,;型号: | 6374/Y7DA-ALNB/P/MS |
厂家: | EVERLIGHT ELECTRONICS CO., LTD |
描述: | Single Color LED, 光电 |
文件: | 总8页 (文件大小:320K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Technical Data Sheet
6374/Y7DA-ALNB/P/MS
Features
․High luminous intensity output
․Oval Shape
․Well defined spatial radiation
․Wide viewing angle (2θ1/2) :65o / 40 o
․UV resistant epoxy
․The product itself will remain within RoHS compliant version
Descriptions
․This precision optical performance oval LED is specifically
des
․Thi
or g
Appli
․Col
․Me
․Variable message signs (VMS)
․Commercial outdoor advertising
Device Selection Guide
LED Part No.
Chip Material Emitted Color
Lens Color
6374/Y7DA-ALNB/P/MS
AlGaInP Brilliant Yellow Yellow Diffused
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Prepared date:05-25-2010
Rev 1
Page: 1 of 8
Device Number : DLE-0003052
Prepared by: Flourix Chen
Ver.:1 Release Date:06/03/2010 Confidential Level:一般 狀態:Approved(正式發行)
ꢀ
Technical Data Sheet
6374/Y7DA-ALNB/P/MS
Package Dimensions
Notes:
․Other dimensions are in millimeters, tolerance is 0.25mm except being specified.
․Protruded resin under flange is 1.5mm Max LED.
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Prepared date:05-25-2010
Rev 1
Page: 2 of 8
Device Number : DLE-0003052
Prepared by: Flourix Chen
Ver.:1 Release Date:06/03/2010 Confidential Level:一般 狀態:Approved(正式發行)
ꢀ
Technical Data Sheet
6374/Y7DA-ALNB/P/MS
Absolute Maximum Rating (Ta=25℃)
Parameter
Symbol
Absolute Maximum Rating
Unit
Forward Current
IF
50
mA
Pulse Forward Current
(Duty1/10@ 1KHz)
IFP
160
mA
℃
℃
V
Operating Temperature
Storage Temperature
Electrostatic Discharge
Soldering Temperature
Power Dissipation
Topr
Tstg
-40 ~ +85
-40 ~ +100
ESD
Tsol *
Pd
2K
260
120
5
℃
mW
V
Reverse Voltage
VR
Notes: * Soldering time≦5 seconds.
Electro-Optical Characteristics (T=25℃)
P
ndition
Lumi
Vie
Peak
Domina
Spectr
Forw
Rev
20mA
R=5V
Rank C
Rank
L
M
N
Luminous Intensity
1425~1800
1800~2250
2250~2850
Unit:mcd
*Measurement Uncertainty of Luminous Intensity: ±10%
Rank
1
2
3
4
Forward Voltage
1.8~2.0
2.0~2.2
2.2~2.4
2.4~2.6
*Measurement Uncertainty of Forward Voltage: ±0.1V
Unit:V
Rank
1
2
Dominant Wavelength
586~590
590~594
*Measurement Uncertainty of Dominant Wavelength ±1.0nm
Unit:nm
*The quantity ratio of the ranks is decided by EVERLIGHT.
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Prepared date:05-25-2010
Rev 1
Page: 3 of 8
Device Number : DLE-0003052
Prepared by: Flourix Chen
Ver.:1 Release Date:06/03/2010 Confidential Level:一般 狀態:Approved(正式發行)
ꢀ
Technical Data Sheet
6374/Y7DA-ALNB/P/MS
Typical Electro-Optical Characteristics Curves
Relative Intensity vs. Wavelength
Forward Current vs. Forward Voltage
1.0
0.8
0.6
0.4
0.2
0.0
50
40
30
20
10
0
500
550
600
650
700
1.0
1.5
2.0
2.5
3.0
3.5
Wavelength(nm)
Forward Voltage(V)
Relati
ty
2.0
1.5
1.0
0.5
0.0
0.0
25
30
35
40
45
50
55
60
65
70
0
10
20
30
40
50
Ambient Temperature Ta(OC)
Forward Current(mA)
Forward Current vs. Ambient Temp.
Radiation Characteristics
60
50
40
30
20
10
0
0
20
40
60
80
100
Ambient Temperature Ta(OC)
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Prepared date:05-25-2010
Rev 1
Page: 4 of 8
Device Number : DLE-0003052
Prepared by: Flourix Chen
Ver.:1 Release Date:06/03/2010 Confidential Level:一般 狀態:Approved(正式發行)
ꢀ
Technical Data Sheet
6374/Y7DA-ALNB/P/MS
Packing Specification
■ Anti-electrostatic bag
Label
P b
E
L
E
C
T
R
O
S
T
A
T
I
C
E
L
I
E
C
A
T
C
R
T
O N A G N E T IC
M
A
G
N
E
T
I
C
O
R
R
A
D
O
IV E R E L D S
a
n
ti-static fo
r
7
5
0
■ Inner
CAT: Ranks of Luminous Intensity and Forward Voltage
HUE: Rank of Dominant Wavelength
REF: Reference
■ Outside Carton
LOT No: Lot Number
MADE IN TAIWAN: Production Place
■ Packing Quantity
1. 500 PCS/1 Bag, 5 Bags/1 Inner Carton
2. 10 Inner Cartons/1 Outside Carton
Everlight Electronics Co., Ltd.
Device Number : DLE-0003052
http\\:www.everlight.com
Prepared date:05-25-2010
Rev 1
Page: 5 of 8
Prepared by: Flourix Chen
Ver.:1 Release Date:06/03/2010 Confidential Level:一般 狀態:Approved(正式發行)
ꢀ
Technical Data Sheet
6374/Y7DA-ALNB/P/MS
Notes
1. Lead Forming
During lead formation, the leads should be bent at a point at least 3mm from the base of the
epoxy bulb.
Lead forming should be done before soldering.
Avoid stressing the LED package during leads forming. The stress to the base may damage the
LED’s characteristics or it may break the LEDs.
Cut the LED leadframes at room temperature. Cutting the leadframes at high temperatures
may cause failure of the LEDs.
When mounting the LEDs onto a PCB, the PCB holes must be aligned exactly with the lead
position of the LED. If the LEDs are mounted with stress at the leads, it causes deterioration
2. Stora
hipped from
nths or more,
nd moisture
h humidity
3. Soldering
Careful attention should be paid during soldering. When soldering, leave more then 3mm
from solder joint to epoxy bulb, and soldering beyond the base of the tie bar is recommended.
Recommended soldering conditions:
Hand Soldering
DIP Soldering
100℃ Max. (60 sec
300℃ Max. (30W
Max.)
Temp. at tip of iron
Preheat temp.
Max.)
Soldering time
Distance
3 sec Max.
Bath temp. & time
Distance
260 Max., 5 sec Max
3mm Min. (From
solder joint to epoxy
bulb)
3mm Min.(From
solder joint to
epoxy bulb)
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Prepared date:05-25-2010
Rev 1
Page: 6 of 8
Device Number : DLE-0003052
Prepared by: Flourix Chen
Ver.:1 Release Date:06/03/2010 Confidential Level:一般 狀態:Approved(正式發行)
ꢀ
Technical Data Sheet
6374/Y7DA-ALNB/P/MS
Recommended soldering profile
la m in a r w av e
F lu x in g
P re h e ad
emperature
l shock or
A rapid-rate process is not recommended for cooling the LEDs down from the peak
temperature.
Although the recommended soldering conditions are specified in the above table, dip or
handsoldering at the lowest possible temperature is desirable for the LEDs.
Wave soldering parameter must be set and maintain according to recommended temperature
and dwell time in the solder wave.
4. Cleaning
When necessary, cleaning should occur only with isopropyl alcohol at room temperature for
a duration of no more than one minute. Dry at room temperature before use.
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Prepared date:05-25-2010
Rev 1
Page: 7 of 8
Device Number : DLE-0003052
Prepared by: Flourix Chen
Ver.:1 Release Date:06/03/2010 Confidential Level:一般 狀態:Approved(正式發行)
ꢀ
Technical Data Sheet
6374/Y7DA-ALNB/P/MS
Do not clean the LEDs by the ultrasonic. When it is absolutely necessary, the influence of
ultrasonic cleaning on the LEDs depends on factors such as ultrasonic power and the
assembled condition. Ultrasonic cleaning shall be pre-qualified to ensure this will not cause
damage to the LED
5. Heat Management
Heat management of LEDs must be taken into consideration during the design stage of LED
application. The current should be de-rated appropriately by referring to the de-rating curve
found in each product specification.
The temperature surrounding the LED in the application should be controlled. Please refer
to the data sheet de-rating curve.
6. ESD
r handling
face of the
.
7. Othe
uthority on
material change for above specification.
When using this product, please observe the absolute maximum ratings and the instructions
for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for
any damage resulting from use of the product which does not comply with the absolute
maximum ratings and the instructions included in these specification sheets.
These specification sheets include materials protected under copyright of EVERLIGHT
corporation. Please don’t reproduce or cause anyone to reproduce them without
EVERLIGHT’s consent.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http:\\www.everlight.com
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Prepared date:05-25-2010
Rev 1
Page: 8 of 8
Device Number : DLE-0003052
Prepared by: Flourix Chen
Ver.:1 Release Date:06/03/2010 Confidential Level:一般 狀態:Approved(正式發行)
ꢀ
相关型号:
63740-101LF
Board Connector, 4 Contact(s), 2 Row(s), Female, Right Angle, Press Fit Terminal, Locking, Receptacle, LEAD FREE
AMPHENOL
63740-102LF
Board Connector, 4 Contact(s), 4 Row(s), Female, Right Angle, Press Fit Terminal, Locking, Receptacle, LEAD FREE
AMPHENOL
63740-901LF
Board Connector, 4 Contact(s), 2 Row(s), Female, Right Angle, Press Fit Terminal, Locking, Receptacle, LEAD FREE
AMPHENOL
6374039
CABLE ASSEMBLY, FIBER OPTIC, 62.5/125 PLENUM ZIP, AMP SC DUPLEX FIBER CHANNEL, OPTIMATE
MACOM
6374039-1
CABLE ASSEMBLY, FIBER OPTIC, 62.5/125 PLENUM ZIP, AMP SC DUPLEX FIBER CHANNEL, OPTIMATE
MACOM
6374039-2
CABLE ASSEMBLY, FIBER OPTIC, 62.5/125 PLENUM ZIP, AMP SC DUPLEX FIBER CHANNEL, OPTIMATE
MACOM
6374039-3
CABLE ASSEMBLY, FIBER OPTIC, 62.5/125 PLENUM ZIP, AMP SC DUPLEX FIBER CHANNEL, OPTIMATE
MACOM
6374039-5
CABLE ASSEMBLY, FIBER OPTIC, 62.5/125 PLENUM ZIP, AMP SC DUPLEX FIBER CHANNEL, OPTIMATE
MACOM
6374039-6
CABLE ASSEMBLY, FIBER OPTIC, 62.5/125 PLENUM ZIP, AMP SC DUPLEX FIBER CHANNEL, OPTIMATE
MACOM
6374039-7
CABLE ASSEMBLY, FIBER OPTIC, 62.5/125 PLENUM ZIP, AMP SC DUPLEX FIBER CHANNEL, OPTIMATE
MACOM
6374039-8
CABLE ASSEMBLY, FIBER OPTIC, 62.5/125 PLENUM ZIP, AMP SC DUPLEX FIBER CHANNEL, OPTIMATE
MACOM
6374039-9
CABLE ASSEMBLY, FIBER OPTIC, 62.5/125 PLENUM ZIP, AMP SC DUPLEX FIBER CHANNEL, OPTIMATE
MACOM
©2020 ICPDF网 联系我们和版权申明