67-21UWC/S400-X8/TR10 [EVERLIGHT]
Single Color LED, White, Water Clear, 2.4mm, LEAD FREE PACKAGE-2;型号: | 67-21UWC/S400-X8/TR10 |
厂家: | EVERLIGHT ELECTRONICS CO., LTD |
描述: | Single Color LED, White, Water Clear, 2.4mm, LEAD FREE PACKAGE-2 |
文件: | 总10页 (文件大小:150K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
White Reverse Package Top View LEDs
67-21UWC/S400-XX/TR10
Features
˙Fluorescence Type
˙High Luminous Intensity
˙High Efficiency
˙Emission Color:x=0.29,y=0.30
˙Pb-free.
Descriptions
The white LED which was fabricated using a blue LED and
a phosphor, and the phosphor is excited by blue light and
emits yellow fluorescence.
The mixture of blue light and yellow light results in a
white emission.
Applications
˙OA Equipment
˙Backlighting of Full Color LCD
˙Automotive Equipment
˙Replacement of Conventional Light
Bulbs and Fluorescent Lamps
Device Selection Guide
Chip
Lens Color
Material
Emitted Color
InGaN
White
Water Clear
verlight Electronics Co., Ltd.
Device No. : DSE-671-240
http://www.everlight.com
Prepared date 03.22.2004
Rev. 1.0
Page: 1 of10
Prepared by: Teresa
EVERLIGHT ELECTRONICS CO.,LTD.
67-21UWC/S400-XX/TR10
Package Dimensions
C
L
-
+
Polarity
For reflow soldering (propose)
Note :
Tolerances dimension ±0.1 unless otherwise noted
Unit : mm
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Units
mA
mA
V
Forward Current
IF
IFP
VR
25
100
5
Pulse Forward Current*1
Reverse Voltage
Power Dissipation
Pd
110
mW
Operating Temperature
Storage Temperature
Soldering Temperature*2
Topr
Tstg
Tsol
-40 ~ +85
-40 ~ +100
260
℃
℃
℃
Electrostatic Discharge
ESD
150
V
Notes: *1:IFP Conditions--Pulse Width≦10msec and Duty≦1/10.
*2:Soldering time≦5 seconds.
verlight Electronics Co., Ltd.
Device No. : DSE-671-240
http://www.everlight.com
Prepared date 03.22.2004
Rev. 1.0
Page: 2 of10
Prepared by: Teresa
EVERLIGHT ELECTRONICS CO.,LTD.
67-21UWC/S400-XX/TR10
Electro-Optical Characteristics (Ta=25℃)
*Chip
Rank
Parameter
Symbol
Min.
Typ.
Max.
--
Units
mcd
Condition
IF=20mA
100
200
240
400
485
600
--
290
360
450
630
750
1000
3.5
A4
A5
A6
X7
X8
X9
--
IV
Luminous Intensity
Forward Voltage
Reverse Current
Viewing Angle
Chromaticity
VF
4.3
10
--
V
μA
deg
--
IF=20mA
VR=5V
IR
--
--
--
--
--
--
2θ1/2
--
120
0.29
0.30
IF=20mA
IF=20mA
IF=20mA
x
y
--
--
Coordinates
--
--
--
67-21UWC/S400-XX/TR10
Chip Rank
Notes: *The C.I.E. 1931 chromaticity diagram.
*The products are sensitive to static electricity and care must be fully taken when
handling products.
Chromaticity Coordinates Specifications for Bin Grading
CIE_x
CIE_y
Color grading
A
Min
0.22
0.25
0.265
0.28
0.295
0.31
Max
0.27
0.285
0.3
Min
Max
0.315
0.325
0.335
0.345
0.355
0.385
0.215
0.245
0.255
0.265
0.275
0.285
B1
B
B2
C1
0.315
0.33
0.37
C
C2
D
verlight Electronics Co., Ltd.
Device No. : DSE-671-240
http://www.everlight.com
Prepared date 03.22.2004
Rev. 1.0
Page: 3 of10
Prepared by: Teresa
EVERLIGHT ELECTRONICS CO.,LTD.
67-21UWC/S400-XX/TR10
Typical Electro-Optical Characteristics Curves
verlight Electronics Co., Ltd.
Device No. : DSE-671-240
http://www.everlight.com
Prepared date 03.22.2004
Rev. 1.0
Page: 4 of10
Prepared by: Teresa
EVERLIGHT ELECTRONICS CO.,LTD.
67-21UWC/S400-XX/TR10
Typical Electro-Optical Characteristics Curves
verlight Electronics Co., Ltd.
Device No. : DSE-671-240
http://www.everlight.com
Prepared date 03.22.2004
Rev. 1.0
Page: 5 of10
Prepared by: Teresa
EVERLIGHT ELECTRONICS CO.,LTD.
67-21UWC/S400-XX/TR10
Label explanation
CAT: Luminous Intensity Rank
HUE: Chromaticity Coordinates Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
verlight Electronics Co., Ltd.
Device No. : DSE-671-240
http://www.everlight.com
Prepared date 03.22.2004
Rev. 1.0
Page: 6 of10
Prepared by: Teresa
EVERLIGHT ELECTRONICS CO.,LTD.
67-21UWC/S400-XX/TR10
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel.
Moisture Resistant Packaging
Aluminum moistue-proof bag
Label
Desiccant
Label
verlight Electronics Co., Ltd.
Device No. : DSE-671-240
http://www.everlight.com
Prepared date 03.22.2004
Rev. 1.0
Page: 7 of10
Prepared by: Teresa
EVERLIGHT ELECTRONICS CO.,LTD.
67-21UWC/S400-XX/TR10
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
Test
Sample
No.
1
Items
Test Condition
Ac/Re
Hours/Cycles Size
Temp. : 260℃±5℃
Min. 5sec.
Reflow Soldering
22 PCS. 0/1
6 Min.
H : +100℃ 15min
300 Cycles
2
Temperature Cycle
Thermal Shock
22 PCS. 0/1
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
300 Cycles
3
4
22 PCS. 0/1
22 PCS. 0/1
∫ 10 sec
L : -10℃ 5min
High Temperature
Storage
Low Temperature
Storage
1000 Hrs.
1000 Hrs.
Temp. : 100℃
Temp. : -40℃
IF = 20 mA
5
6
22 PCS. 0/1
22 PCS. 0/1
DC Operating Life
1000 Hrs.
1000 Hrs.
High Temperature /
High Humidity
85℃/ 85%RH
7
22 PCS. 0/1
verlight Electronics Co., Ltd.
Device No. : DSE-671-240
http://www.everlight.com
Prepared date 03.22.2004
Rev. 1.0
Page: 8 of10
Prepared by: Teresa
EVERLIGHT ELECTRONICS CO.,LTD.
67-21UWC/S400-XX/TR10
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is often
started at the time of the hand solder.
verlight Electronics Co., Ltd.
Device No. : DSE-671-240
http://www.everlight.com
Prepared date 03.22.2004
Rev. 1.0
Page: 9 of10
Prepared by: Teresa
EVERLIGHT ELECTRONICS CO.,LTD.
67-21UWC/S400-XX/TR10
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
verlight Electronics Co., Ltd.
Device No. : DSE-671-240
http://www.everlight.com
Prepared date 03.22.2004
Rev. 1.0
Page: 10 of10
Prepared by: Teresa
相关型号:
67-21UYOC/S530-A2/TR10
Single Color LED, Brilliant Orange, Water Clear, 2.4mm, ROHS COMPLIANT, PLASTIC, LCC-2
EVERLIGHT
67-21UYOC/S530-A4/TR10
Single Color LED, Brilliant Orange, Water Clear, 2.4mm, ROHS COMPLIANT, PLASTIC, LCC-2
EVERLIGHT
67-21UYOC/S530-A5/TR10
Single Color LED, Brilliant Orange, Water Clear, 2.4mm, ROHS COMPLIANT, PLASTIC, LCC-2
EVERLIGHT
©2020 ICPDF网 联系我们和版权申明