7344-G2T3-AQTB-X [EVERLIGHT]

Specially designed for applications; 专门设计的应用程序
7344-G2T3-AQTB-X
型号: 7344-G2T3-AQTB-X
厂家: EVERLIGHT ELECTRONICS CO., LTD    EVERLIGHT ELECTRONICS CO., LTD
描述:

Specially designed for applications
专门设计的应用程序

文件: 总8页 (文件大小:121K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Technical Data Sheet  
7344/G2T3-AQTB/X  
Features  
˙Popular T-1 3/4package.  
˙High efficiency.  
˙General purpose leads.  
˙Selected minimum intensities.  
˙Available on tape and reel.  
˙The product itself will remain within RoHS compliant version..  
˙ESD-withstand voltage: up to 4K V  
Descriptions  
˙The series is specially designed for applications  
requiring higher brightness.  
˙The LED lamps are available with different  
colors, intensities, epoxy colors, etc.  
Applications  
˙Status indicators.  
˙Commercial use.  
˙Advertising Signs.  
˙Back lighting.  
Device Selection Guide  
Chip  
LED Part No.  
Lens Color  
Stopper  
Material  
Emitted Color  
7344/G2T3-AQTB/P  
7344/G2T3-AQTB  
Yes  
No  
InGaN  
Super Green  
Green Trans  
Everlight Electronics Co., Ltd.  
Device Number : DLE-734-095  
http\\:www.everlight.com  
Prepared date: 11-08-2005  
Rev 2  
Page: 1 of 8  
Prepared by: Flourix Chen  
Technical Data Sheet  
7344/G2T3-AQTB/X  
Package Dimensions  
Stopper type  
No Stopper type  
Notes:  
˙Other dimensions are in millimeters, tolerance is 0.25mm except being specified.  
˙Protruded resin under flange is 1.5mm Max LED.  
˙Bare copper alloy is exposed at tie-bar portion after cutting.  
Everlight Electronics Co., Ltd.  
Device Number : DLE-734-095  
http\\:www.everlight.com  
Prepared date: 11-08-2005  
Rev 2  
Page: 2 of 8  
Prepared by: Flourix Chen  
Technical Data Sheet  
7344/G2T3-AQTB/X  
Absolute Maximum Rating (Ta=25)  
Parameter  
Symbol Absolute Maximum Rating  
Unit  
Forward Current  
IF  
25  
mA  
Pulse Forward Current (Duty1/10@ 1KHz)  
Operating Temperature  
IFP  
100  
mA  
V
Topr  
Tstg  
-40 ~ +85  
Storage Temperature  
-40 ~ +100  
Reverse Voltage  
VR  
5
Electrostatic Discharge  
ESD  
4K  
V
260 ±5  
110  
Soldering Temperature  
Power Dissipation  
Tsol  
Pd  
mW  
mA  
Zener Reverse Current  
Iz  
100  
Notes: Soldering time5 seconds.  
Electro-Optical Characteristics (Ta=25)  
Parameter  
Symbol  
Min.  
Typ.  
Max.  
Unit  
Condition  
IF=20mA  
Radiometric Intensity  
Viewing Angle  
IV  
2θ1/2  
λp  
3600  
----  
----  
----  
----  
----  
----  
5.2  
5650  
30  
----  
----  
----  
----  
----  
4.0  
50  
mcd  
deg  
Peak Wavelength  
518  
525  
35  
λd  
Dominant Wavelength  
Spectrum Half width  
Forward Voltage  
nm  
Δλ  
VF  
----  
----  
----  
V
uA  
V
Reverse Current  
IR  
VR=5V  
Zener Reverse Voltage  
Vz  
----  
Iz=5mA  
Everlight Electronics Co., Ltd.  
Device Number : DLE-734-095  
http\\:www.everlight.com  
Prepared date: 11-08-2005  
Rev 2  
Page: 3 of 8  
Prepared by: Flourix Chen  
Technical Data Sheet  
7344/G2T3-AQTB/X  
Rank Combination (IF=20mA)  
Rank  
Q
R
S
T
Luminous Intensity  
3600~4500  
4500~5650  
5650~7150  
7150~9000  
*Measurement Uncertainty of Luminous Intensity: ±15%  
Unit: :mcd  
B
3
Rank  
1
2
4
5
Forward Voltage  
3.0~3.2  
3.2~3.4  
3.4~3.6  
3.6~3.8  
3.8~4.0  
*Measurement Uncertainty of Forward Voltage: ±0.1V  
Unit:V  
Rank  
3
4
5
Dominant Wavelength  
520~524  
524~528  
528~532  
*Measurement Uncertainty of Dominant Wavelength ±1.0nm  
Unit:nm  
Everlight Electronics Co., Ltd.  
Device Number : DLE-734-095  
http\\:www.everlight.com  
Prepared date: 11-08-2005  
Rev 2  
Page: 4 of 8  
Prepared by: Flourix Chen  
Technical Data Sheet  
7344/G2T3-AQTB/X  
Typical Electro-Optical Characteristics Curves  
Everlight Electronics Co., Ltd.  
Device Number : DLE-734-095  
http\\:www.everlight.com  
Prepared date: 11-08-2005  
Rev 2  
Page: 5 of 8  
Prepared by: Flourix Chen  
Technical Data Sheet  
7344/G2T3-AQTB/X  
Packing Quantity Specification  
1.500PCS/1Bag5Bags/1Box  
2.10Boxes/1Carton  
Label Form Specification  
EVERLIGHT  
CPN: Customer’s Production Number  
P/N : Production Number  
QTY: Packing Quantity  
CPN:  
P/N:  
CAT: Ranks of Luminous and Forward Voltage  
HUE: Ranks of Dominant Wavelength  
REF: Reference  
RoHS  
7344/G2T3-AQTB/X  
LOT No: Lot Number  
QTY:  
CAT:  
HUE:  
REF:  
MADE IN TAIWAN: Production Place  
LOT NO:  
MADE IN TAIWAN  
Everlight Electronics Co., Ltd.  
Device Number : DLE-734-095  
http\\:www.everlight.com  
Prepared date: 11-08-2005  
Rev 2  
Page: 6 of 8  
Prepared by: Flourix Chen  
Technical Data Sheet  
7344/G2T3-AQTB/X  
Notes  
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on  
material change for above specification.  
2. When using this product, please observe the absolute maximum ratings and the instructions for  
using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any  
damage resulting from use of the product which does not comply with the absolute maximum  
ratings and the instructions included in these specification sheets.  
3. These specification sheets include materials protected under copyright of EVERLIGHT  
corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s  
consent.  
4. Below the zener reference voltage Vz, all the current flows through LED and as the voltage  
rises to Vz, the zener diode “breakdown." If the voltage tries to rise above Vz current flows  
through the zener branch to keep the voltage at exactly Vz.  
5. When the LED is connected using serial circuit, if either piece of LED is no light up but current  
can’t flow through causing others to light down. In new design, the LED is parallel with zener  
diode. if either piece of LED is no light up but current can flow through causing others to light  
up.  
Everlight Electronics Co., Ltd.  
Device Number : DLE-734-095  
http\\:www.everlight.com  
Prepared date: 11-08-2005  
Rev 2  
Page: 7 of 8  
Prepared by: Flourix Chen  
Technical Data Sheet  
7344/G2T3-AQTB/X  
6. Soldering Condition  
Careful attention should be paid during soldering. When soldering, leave more then 3mm  
from solder joint to case, and soldering beyond the base of the tie bar is recommended.  
Avoiding applying any stress to the lead frame while the LEDs are at high temperature  
particularly when soldering.  
Recommended soldering conditions:  
Hand Soldering  
400Max. (30W  
DIP Soldering  
Temp. at tip of iron  
Preheat temp.  
Bath temp.  
100Max. (60 sec Max.)  
Max.)  
Soldering time  
Distance  
3 sec Max.  
265 Max.  
3mm Min.(From solder Bath time.  
joint to case)  
5 sec Max.  
Distance  
3mm Min.  
EVERLIGHT ELECTRONICS CO., LTD.  
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,  
Tucheng, Taipei 236, Taiwan, R.O.C  
Tel: 886-2-2267-2000, 2267-9936  
Fax: 886-2267-6244, 2267-6189, 2267-6306  
http:\\www.everlight.com  
Everlight Electronics Co., Ltd.  
Device Number : DLE-734-095  
http\\:www.everlight.com  
Prepared date: 11-08-2005  
Rev 2  
Page: 8 of 8  
Prepared by: Flourix Chen  

相关型号:

7344-V2C3-AQTB

Specially designed for applications
EVERLIGHT

7344-V2T3-ASVA

Specially designed for applications
EVERLIGHT

7344/B2T3-AMQB

Specially designed for applications
EVERLIGHT

7344/G2T3-AQTB

Specially designed for applications
EVERLIGHT

7344/G2T3-AQTB/P

Specially designed for applications
EVERLIGHT

7344/G2T3-AQTB/X

Specially designed for applications
EVERLIGHT

7344/G2T3-AQTBP

Specially designed for applications
EVERLIGHT

7344/V2C3-AQTB

Specially designed for applications
EVERLIGHT

7344/V2C3-ARUA/MS

Single Color LED, Super Blue Green, Water Clear, T-1 3/4, 5mm, ROHS COMPLIANT, PLASTIC PACKAGE-2
EVERLIGHT

7344/V2T3-ASVA

Specially designed for applications
EVERLIGHT

7344/V7C2-ASVA/MS

Single Color LED, Brilliant Green, Water Clear, T-1 3/4, 5mm, ROHS COMPLIANT, PLASTIC PACKAGE-2
EVERLIGHT
EVERLIGHT