75-21UYOC/TR8 [EVERLIGHT]
Technical Data Sheet Preliminary Auto Focus LED (4.0mm Round Leadframe); 技术数据表初步自动对焦LED （ 4.0毫米圆形引线框架）
| 型号： | 75-21UYOC/TR8 |
| 厂家： | 
EVERLIGHT ELECTRONICS CO., LTD |
| 描述： | Technical Data Sheet Preliminary Auto Focus LED (4.0mm Round Leadframe) |
| 文件： | 总9页 (文件大小：163K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Preliminary
Auto Focus LED (4.0mm Round Leadframe)
75-21UYOC/TR8
Features
․Package in 12mm tape on 7" diameter reels.
․Compatible with automatic placement equipment.
․EIA Std. package.
․Mono-color type.
․Pb-free.
․The product itself will remain within RoHS
compliant version.
Descriptions
․The 75-21 SMD taping is much
smaller than leaded components .
Thus enable smaller board size.
Higher packing density.
Reduced storage space and finally smaller
equipment to be obtained.
․Besides, light weight makes them
ideal for miniature applications.
․Furthermore by automation assembly
machines the accuracy is anticipated.
Applications
․Small indicator for indoor applications.
․Flat backlight for LCD, switches and symbols.
․Indicator and backlight in office equipment.
․Indicator and backlight for battery driven
equipment.
․Indicator and backlight for audio and video equipment.
․Backlighting in dashboards and switches.
․Telecommunication：indicator and backlighting in telephone and fax.
Device Selection Guide
Chip
Part No.
Resin Color
Water Clear
Material
Emitted Color
75-21UYOC/TR8
AlGaInP
Brilliant Orange
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
Rev.1.1
Page: 1 of 9
Prepared date: 07-May-2007
Prepared by: Alex Chen
EVERLIGHT ELECTRONICS CO.,LTD.
75-21UYOC/TR8
Package Outline Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
Rev.1.1
Page: 2 of 9
Prepared date: 07-May-2007
Prepared by: Alex Chen
EVERLIGHT ELECTRONICS CO.,LTD.
75-21UYOC/TR8
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
VR
Rating
Unit
Reverse Voltage
Forward Current
5
V
IF
50
mA
Peak Forward Current
(Duty 1/10 @1KHz)
IFP
100
mA
Power Dissipation
Electrostatic Discharge(HBM)
Operating Temperature
Storage Temperature
Pd
120
mW
V
ESD
Topr
Tstg
2000
℃
-40 ~ +85
-40 ~ +90
℃
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Soldering Temperature
Tsol
Electro-Optical Characteristics (Ta=25℃)
Parameter
Luminous Intensity
Viewing Angle
Symbol Min.
Typ.
15.0
15
Max.
----
Unit
cd
Condition
Iv
10.0
----
2θ1/2
----
deg
λp
λd
----
600
----
611
----
17
----
610
----
Peak Wavelength
nm
nm
IF=20mA
VR=5V
Dominant Wavelength
Spectrum Radiation
Bandwidth
△λ
nm
V
1.7
----
----
----
2.4
10
VF
Forward Voltage
Reverse Current
μA
I
R
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.05V
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
Rev.1.1
Page: 3 of 9
Prepared date: 07-May-2007
Prepared by: Alex Chen
EVERLIGHT ELECTRONICS CO.,LTD.
75-21UYOC/TR8
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
Rev.1.1
Page: 4 of 9
Prepared date: 07-May-2007
Prepared by: Alex Chen
EVERLIGHT ELECTRONICS CO.,LTD.
75-21UYOC/TR8
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions :
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
Rev.1.1
Page: 5 of 9
Prepared date: 07-May-2007
Prepared by: Alex Chen
EVERLIGHT ELECTRONICS CO.,LTD.
75-21UYOC/TR8
Carrier Tape Dimensions : Loaded quantity 800 pcs per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Aluminum moisture-proof bag
Label
Desiccant
Label
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
Prepared date: 07-May-2007
Rev.1.1
Page: 6 of 9
Prepared by: Alex Chen
EVERLIGHT ELECTRONICS CO.,LTD.
75-21UYOC/TR8
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level：90%
LTPD：10%
Test
Hours/Cycles
Sample
Ac/Re
No.
1
Items
Test Condition
Size
Temp. : 260℃±5℃
Min. 5sec.
Reflow Soldering
6 Min.
22 PCS.
0/1
0/1
H : +100℃ 15min
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
∫ 10 sec
300 Cycles
300 Cycles
2
Temperature Cycle
Thermal Shock
22 PCS.
3
4
22 PCS.
22 PCS.
0/1
0/1
L : -10℃ 5min
High Temperature
Storage
Low Temperature
Storage
DC Operating Life
High Temperature /
High Humidity
1000 Hrs.
1000 Hrs.
Temp. : 100℃
Temp. : -40℃
5
6
7
22 PCS.
22 PCS.
22 PCS.
0/1
0/1
0/1
IF = 20 mA
1000 Hrs.
1000 Hrs.
85℃/ 85%RH
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
Rev.1.1
Page: 7 of 9
Prepared date: 07-May-2007
Prepared by: Alex Chen
EVERLIGHT ELECTRONICS CO.,LTD.
75-21UYOC/TR8
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
1~5 °C / Sec.
260°C. Max.
10 Sec. Max.
Pre-heating
180~200°C
1~5 °C / Sec.
60 Sec. Max.
Above 220°C
120 Sec. Max.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
Rev.1.1
Page: 8 of 9
Prepared date: 07-May-2007
Prepared by: Alex Chen
EVERLIGHT ELECTRONICS CO.,LTD.
75-21UYOC/TR8
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of the
hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
Prepared date: 07-May-2007
Rev.1.1
Page: 9 of 9
Prepared by: Alex Chen
相关型号：
75-3%-FA10-20PPM-TANDR
Fixed Resistor, Wire Wound, 10W, 75ohm, 700V, 3% +/-Tol, -20,20ppm/Cel,
VISHAY
75-3%-FA7-20PPM-CARDPACK
Fixed Resistor, Wire Wound, 7W, 75ohm, 560V, 3% +/-Tol, -20,20ppm/Cel,
VISHAY
©2020 ICPDF网 联系我们和版权申明