96-22UBC [EVERLIGHT]
High performance SMD LED with Reflector; 高性能SMD LED与反射型号: | 96-22UBC |
厂家: | EVERLIGHT ELECTRONICS CO., LTD |
描述: | High performance SMD LED with Reflector |
文件: | 总6页 (文件大小:97K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
High performance SMD LED with Reflector
96-22UBC/C430
Features
ꢀ White package.
ꢀ Dual-chip, wide-angle, low-profile LEDs .
ꢀ Excellent chip to chip consistency
ꢀ Super Intensity
ꢀ Highperformance
ꢀ Pb-free.
ꢀ The product itself will remain within RoHS
compliant version.
Applications
ꢀ Automotive: backlighting in dashboard and switch.
ꢀ Telecommunication: indicator and backlighting in
telephone and fax.
ꢀ Indicator and backlight for audio and video
equipment.
ꢀ Indicator and backlight for battery driven
equipment.
ꢀ Display Screen Illumination on Portable Handheld
Devices
ꢀ Indicator and backlight in office equipment.
ꢀ General use.
Device Selection Guide
Chip
Lens Color
Water Clear
Material
Emitted Color
GaN/SiC
Purplish Blue
Everlight Electronics Co., Ltd.
Device No. : DSE-962-022
http://www.everlight.com
prepared date: 19-Sep-2005
Rev. 1
Page: 1 of 6
Prepared by: Venis Wu
EVERLIGHT ELECTRONICS CO.,LTD.
96-22UBC/C430
Package Dimensions
Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm
Everlight Electronics Co., Ltd.
Device No. : DSE-962-022
http://www.everlight.com
prepared date: 19-Sep-2005
Rev. 1
Page: 2 of 6
Prepared by: Venis Wu
EVERLIGHT ELECTRONICS CO.,LTD.
96-22UBC/C430
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
VR
Rating
5
Unit
Reverse Voltage
V
mA
℃
Forward Current
IF
30
Operating Temperature
Storage Temperature
Topr
Tstg
-40 ~ +85
-40~ +100
℃
Electrostatic
Discharge(HBM)
ESD
Pd
1000
130
V
Power Dissipation
mW
Peak Forward Current(Duty
1/10 @ 1KHZ)
IFP
70
mA
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Soldering Temperature
Tsol
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
IV
Min.
16
Typ.
20
Max.
-----
Unit
mcd
Condition
IF=20mA
Luminous Intensity
Viewing Angle
2θ1/2
λp
-----
-----
145
428
-----
-----
deg
nm
IF=20mA
IF=20mA
Peak Wavelength
Dominant Wavelength
λd
nm
nm
IF=20mA
IF=20mA
-----
-----
466
65
-----
-----
Spectrum Radiation
Bandwidth
△λ
Forward Voltage
Reverse Current
VF
IR
V
IF=20mA
VR=5V
-----
-----
7.6
9.0
10
uA
-----
Everlight Electronics Co., Ltd.
Device No. : DSE-962-022
http://www.everlight.com
prepared date: 19-Sep-2005
Rev. 1
Page: 3 of 6
Prepared by: Venis Wu
EVERLIGHT ELECTRONICS CO.,LTD.
96-22UBC/C430
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd.
Device No. : DSE-962-022
http://www.everlight.com
prepared date: 19-Sep-2005
Rev. 1
Page: 4 of 6
Prepared by: Venis Wu
EVERLIGHT ELECTRONICS CO.,LTD.
96-22UBC/C430
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
Test
Sample
Ac/Re
No.
1
Items
Test Condition
Hours/Cycles Size
Temp. : 260℃±5℃
H : +100℃ 15min
Soldering Heat
22 PCS. 0/1
10 Sec
300 Cycles
2
Temperature Cycle
Thermal Shock
22 PCS. 0/1
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
300 Cycles
1000 Hrs.
3
4
22 PCS. 0/1
22 PCS. 0/1
∫ 10 sec
L : -10℃ 5min
High Temperature
Storage
Temp. : 100℃
Low Temperature
Storage
Temp. : -40℃
IF = 20 mA / 25℃
85℃/85%RH
5
6
7
22 PCS. 0/1
22 PCS. 0/1
22 PCS. 0/1
1000 Hrs.
1000 Hrs.
1000 Hrs.
DC Operating Life
High Temperature /
High Humidity
Everlight Electronics Co., Ltd.
Device No. : DSE-962-022
http://www.everlight.com
prepared date: 19-Sep-2005
Rev. 1
Page: 5 of 6
Prepared by: Venis Wu
EVERLIGHT ELECTRONICS CO.,LTD.
96-22UBC/C430
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is often
started at the time of the hand solder.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No. : DSE-962-022
http://www.everlight.com
Rev. 1
Page: 6 of 6
prepared date: 19-Sep-2005
Prepared by: Venis Wu
相关型号:
©2020 ICPDF网 联系我们和版权申明