EHP-1103/SUB01-P01 [EVERLIGHT]
Single Color LED, Blue, Water Clear, 5.9mm, ROHS COMPLIANT PACKAGE-2;
| 型号： | EHP-1103/SUB01-P01 |
| 厂家： | 
EVERLIGHT ELECTRONICS CO., LTD |
| 描述： | Single Color LED, Blue, Water Clear, 5.9mm, ROHS COMPLIANT PACKAGE-2 光电 |
| 文件： | 总8页 (文件大小：189K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Technical Data Sheet
High Power Lamp
Preliminary
EHP-1103/SUB01-P01
Features
․Popular 10mm package.
․View angle:100° .
․High light flux output
․Soldering methods: Dip soldering.
․Optical efficiency: 7.5 lm/W
․Thermal resistance (junction to leadframe): 13K/W
․The product itself will remain within RoHS compliant version.
․ESD-withstand voltage: up to 4KV
Descriptions
․The series is specially designed for applications
requiring higher brightness.
․The LED lamps are available with different
colors, intensities, epoxy colors, etc.
Applications
․Flashlight
․Sunshine light.
․Advertising Signs.
․Back lighting.
Device Selection Guide
Chip
LED Part No.
Lens Color
Material
Emitted Color
Blue
EHP1103/SUG01-P01
InGaN
Water Clear
Everlight Electronics Co., Ltd.
Device Number :
http\\:www.everlight.com
Prepared date:11-30-2006
Rev :
Page: 1 of 8
Prepared by: Shaohsulu
Technical Data Sheet
High Power Lamp
Preliminary
EHP-1103/SUB01-P01
Package Dimensions
Notes:
․Other dimensions are in millimeters, tolerance is 0.25mm except being specified.
․Protruded resin under flange is 1.5mm Max LED.
․Bare copper alloy is exposed at tie-bar portion after cutting.
Everlight Electronics Co., Ltd.
Device Number :
http\\:www.everlight.com
Prepared date:11-30-2006
Rev :
Page: 2 of 8
Prepared by: Shaohsulu
Technical Data Sheet
High Power Lamp
Preliminary
EHP-1103/SUB01-P01
Absolute Maximum Rating (Ta=25℃)
Parameter
Forward Current
Symbol
Absolute Maximum Rating
Unit
IF
350
mA
Thermal resistance (junction to
leadframe)
Rth(j-l)
13
K/W
℃
℃
V
Operating Temperature
Storage Temperature
Electrostatic Discharge
Topr
Tstg
-40 ~ +85
-40 ~ +100
4K
ESD
260 ±5
℃
Soldering Temperature
Power Dissipation
Tsol
Pd
1.4
W
V
Reverse Voltage
VR
Iz
5
mA
Zener Reverse Current
Notes: Soldering time≦5 seconds.
100
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Typ.
15
Max.
Unit
Condition
Min.
Flux
8
22
--
lm
nm
nm
deg
V
Luminous Flux
λ
p
d
Peak Wavelength
468
470
100
3.5
--
--
464
--
λ
Dominant Wavelength
Viewing Angle
476
--
IF=350mA
2θ1/2
VF
Forward Voltage
4.0
50
--
3.0
--
μA
V
Reverse Current
IR
VR=5V
Zener Reverse Voltage
Vz
5.2
--
Iz=5mA
Everlight Electronics Co., Ltd.
Device Number :
http\\:www.everlight.com
Prepared date:11-30-2006
Rev :
Page: 3 of 8
Prepared by: Shaohsulu
Technical Data Sheet
High Power Lamp
Preliminary
EHP-1103/SUB01-P01
Rank Combination (IF=350mA)
Rank
B1
B2
B3
B4
B5
Luminous Flux
8~10
10~12.5
12.5~15
15~18
18~22
*Measurement Uncertainty of Luminous Intensity: 15%
Unit:lm
Forward Voltage Combination (V at 350mA)
Rank
1
2
3
4
5
3.2~3.4
Forward Voltage
3.0~3.2
3.4~3.6
3.6~3.8
3.8~4.0
*Measurement Uncertainty of Forward Voltage: 0.1V
Unit:V
Color Combination ( at 350mA)
Rank
3
4
5
Dominant Wavelength
464~468
468~472
472~476
Unit: nm
Everlight Electronics Co., Ltd.
Device Number :
http\\:www.everlight.com
Prepared date:11-30-2006
Rev :
Page: 4 of 8
Prepared by: Shaohsulu
Technical Data Sheet
High Power Lamp
Preliminary
EHP-1103/SUB01-P01
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd.
Device Number :
http\\:www.everlight.com
Prepared date:11-30-2006
Rev :
Page: 5 of 8
Prepared by: Shaohsulu
Technical Data Sheet
High Power Lamp
Preliminary
EHP-1103/SUB01-P01
Packing Quantity Specification
1.200PCS/1Bag，5Bags/1Box
2.10Boxes/1Carton
Label Form Specification
EVERLIGHT
CPN: Customer’s Production Number
P/N : Production Number
QTY: Packing Quantity
CPN:
P/N:
CAT: Ranks of Total Flux and Forward Voltage
HUE: Color Rank
RoHS
REF: Reference
EHP-1103/SUB01-P01
LOT No: Lot Number
QTY：
CAT:
HUE:
REF:
MADE IN TAIWAN: Production Place
LOT NO：
MADE IN TAIWAN
Everlight Electronics Co., Ltd.
Device Number :
http\\:www.everlight.com
Prepared date:11-30-2006
Rev :
Page: 6 of 8
Prepared by: Shaohsulu
Technical Data Sheet
High Power Lamp
Preliminary
EHP-1103/SUB01-P01
Notes
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions for
using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any
damage resulting from use of the product which does not comply with the absolute maximum
ratings and the instructions included in these specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT
corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s
consent.
4. Below the zener reference voltage Vz, all the current flows through LED and as the voltage rises
to Vz, the zener diode “breakdown." If the voltage tries to rise above Vz current flows through
the zener branch to keep the voltage at exactly Vz.
5. When the LED is connected using serial circuit, if either piece of LED is no light up but current
can’t flow through causing others to light down. In new design, the LED is parallel with zener
diode. if either piece of LED is no light up but current can flow through causing others to light
up.
Everlight Electronics Co., Ltd.
Device Number :
http\\:www.everlight.com
Prepared date:11-30-2006
Rev :
Page: 7 of 8
Prepared by: Shaohsulu
Technical Data Sheet
High Power Lamp
Preliminary
EHP-1103/SUB01-P01
6. If the emitter is operated, consider using metal heat sink with the lowest possible thermal
resistance. For the thermal performance using a flat heat sink, allow an exposed surface area of
about 25mm2 at least.
7. Soldering Condition
Careful attention should be paid during soldering. When soldering, leave more then 3mm
from solder joint to case, and soldering beyond the base of the tie bar is recommended.
Avoiding applying any stress to the lead frame while the LEDs are at high temperature
particularly when soldering.
Recommended soldering conditions:
Hand Soldering
400℃ Max. (30W
DIP Soldering
Temp. at tip of iron
Preheat temp.
Bath temp.
100℃ Max. (60 sec Max.)
Max.)
Soldering time
Distance
3 sec Max.
265 Max.
3mm Min.(From solder Bath time.
joint to case)
5 sec Max.
Distance
3mm Min.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http:\\www.everlight.com
Everlight Electronics Co., Ltd.
Device Number :
http\\:www.everlight.com
Prepared date:11-30-2006
Rev :
Page: 8 of 8
Prepared by: Shaohsulu
相关型号：
EHP-1103/UX01-P01
Single Color LED, Warm White, Water Clear, 5.9mm, ROHS COMPLIANT PACKAGE-2
EVERLIGHT
EHP-5393/SUB01-P01
Single Color LED, Blue, Water Clear, T-4, 10mm, ROHS COMPLIANT PACKAGE-2
EVERLIGHT
©2020 ICPDF网 联系我们和版权申明