ELS-401SURWA/S530-A3 [EVERLIGHT]
Single Color LED,;型号: | ELS-401SURWA/S530-A3 |
厂家: | EVERLIGHT ELECTRONICS CO., LTD |
描述: | Single Color LED, 光电 |
文件: | 总6页 (文件大小:299K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Display . Through-hole
ELS-401SURWA/S530-A3
Features
• Industrial
• Low powe
• Categoriz
• Pb free an
Descriptio
• The ELS-
• The display provides excellent reliability in bright ambient light.
• The device is made with white segments and gray surface.
Applications
• Home appliances
• Instrument panels
• Digital readout displays
1
Copyright © 2010, Everlight All Rights Reserved. Release Date : Nov. 15, 2012 Issue No : DDF-0001466 Rev.2
www.everlight.com
Ver.:2 Release Date:11/16/2012 Confidential Level:一般 狀態:Approved(正式發行)
ꢀ
DATASHEET
Display . Through-hole
ELS-401SURWA/S530-A3
Device Selection Guide
Chip Materials
AlGaInP
Emitted Color
Brilliant Red
Resin Color
White Diffusion
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
5
Reverse Voltage
VR
IF
V
25
Forward Current
mA
Peak Forward Current
(Duty 1/10
Power Diss
Operating T
Storage Tem
Soldering T
(Soldering t
Electro-O
Parameter
Symbol
Min.
Typ.
Max.
Unit
Condition
Luminous Intensity*1
Peak Wavelength
Iv
mcd
nm
nm
nm
V
IF=10mA
IF=20mA
IF=20mA
IF=20mA
IF=20mA
VR=5V
5.6
-----
-----
-----
-----
-----
12.5
632
624
20
-----
-----
-----
-----
2.4
λp
λd
Δλ
Dominant Wavelength
Spectrum Radiation Bandwidth
Forward Voltage
VF
IR
2.0
μA
Reverse Current
-----
100
Note:
1. Luminous Intensity is a average value which is measured one 7-segment.
2. Tolerance of Luminous Intensity: ± 10 %
3. Tolerance of Forward Voltage: ± 0.1V
2
Copyright © 2010, Everlight All Rights Reserved. Release Date : Nov. 15, 2012 Issue No : DDF-0001466 Rev.2
www.everlight.com
Ver.:2 Release Date:11/16/2012 Confidential Level:一般 狀態:Approved(正式發行)
ꢀ
DATASHEET
Display . Through-hole
ELS-401SURWA/S530-A3
Typical Electro-Optical Characteristics Curves
Spectrum Distribution (Ta=25℃)
Forward Current vs. Forward Voltage (Ta=25℃)
Wave
Forward Cu
Ambient Temperature (°C )
3
Copyright © 2010, Everlight All Rights Reserved. Release Date : Nov. 15, 2012 Issue No : DDF-0001466 Rev.2
www.everlight.com
Ver.:2 Release Date:11/16/2012 Confidential Level:一般 狀態:Approved(正式發行)
ꢀ
DATASHEET
Display . Through-hole
ELS-401SURWA/S530-A3
Package Dimension & Internal Circuit Diagram
Note: Tolerances unless mentioned ±0.25mm. Unit = mm
4
Copyright © 2010, Everlight All Rights Reserved. Release Date : Nov. 15, 2012 Issue No : DDF-0001466 Rev.2
www.everlight.com
Ver.:2 Release Date:11/16/2012 Confidential Level:一般 狀態:Approved(正式發行)
ꢀ
DATASHEET
Display . Through-hole
ELS-401SURWA/S530-A3
Packing Materials
Label Explanation
‧CPN: Customer’s Product Number
‧P/N: Product Number
‧QTY: Packing Quantity
‧CAT: Luminous Intensity Rank
‧HUE: Reference
‧REF: Reference
S401SURWA/S530-A3
‧LOT No: Lot Number
‧REFERENCE: Volume Label code
Packing Pro
27 PCS/Tube
88Tubes/Box
4 Boxes/Carton
Application Restrictions
1. Specification described in this document. Above specification may be changed without notice. EVERLIGHT will
reserve authority on material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in
these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the
product which does not comply with the absolute maximum ratings and the instructions included in these
specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT Corporation. Please don’t
reproduce or cause anyone to reproduce them without EVERLIGHT’s consent.
5
Copyright © 2010, Everlight All Rights Reserved. Release Date : Nov. 15, 2012 Issue No : DDF-0001466 Rev.2
www.everlight.com
Ver.:2 Release Date:11/16/2012 Confidential Level:一般 狀態:Approved(正式發行)
ꢀ
DATASHEET
Display . Through-hole
ELS-401SURWA/S530-A3
4. ESD (Electrostatic Discharge)
The products are sensitive to static electricity or surge voltage. ESD can damage a die and its reliability.
When handling the products, the following measures against electrostatic discharge are strongly
recommended:
Eliminating the charge
Grounded wrist strap, ESD footwear, clothes, and floors
Grounded workstation equipment and tools
ESD table/shelf mat made of conductive materials
Proper grounding is required for all devices, equipment, and machinery used in product assembly.
Surge protection should be considered when designing of commercial products.
If tools or equipment contain insulating materials such as glass or plastic,
the following measures against electrostatic discharge are strongly recommended:
Dissipating static charge with conductive materials
6
Copyright © 2010, Everlight All Rights Reserved. Release Date : Nov. 15, 2012 Issue No : DDF-0001466 Rev.2
www.everlight.com
Ver.:2 Release Date:11/16/2012 Confidential Level:一般 狀態:Approved(正式發行)
ꢀ
相关型号:
ELS-431SYGWA/S530-E2
Smart/Normal 7 Seg Numeric LED Display, Super Yellow Green, 10mm, ROHS COMPLIANT PACKAGE-10
EVERLIGHT
©2020 ICPDF网 联系我们和版权申明