GHC-YR1S2 [EVERLIGHT]
Chip LED (1.1mm Height); LED芯片（ 1.1毫米高）
| 型号： | GHC-YR1S2 |
| 厂家： | 
EVERLIGHT ELECTRONICS CO., LTD |
| 描述： | Chip LED (1.1mm Height) |
| 文件： | 总10页 (文件大小：158K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
0805 Package Chip LED (1.1mm Height)
17-21/GHC-YR1S2/3T
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Mono-color type.
․Pb-free.
․The product itself will remain within ROHS complaintVersion.
Descriptions
․The 17-21 SMD Taping is much smaller
than lead frame type components, thus
enable smaller board size, higher packing
density, reduced storage space and finally
smaller equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Automotive: backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip
Part No.
Lens Color
Material
Emitted Color
Brilliant Green
17-21/GHC-YR1S2/3T
InGaN
Water Clear
Everlight Electronics Co., Ltd.
http://www.everlight.com
Prepared date:18-Aug-2005
Rev. 1
Page: 1 of 10
Device No.；SZ DSE-171-G11
Prepared by:Meng Yali
EVERLIGHT ELECTRONICS CO.,LTD.
17-21/GHC-YR1S2/3T
Package Outline Dimensions
-
+
Note: The tolerances unless mentioned is ±0.1mm, Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Prepared date:18-Aug-2005
Rev. 1
Page: 2 of 10
Device No.；SZ DSE-171-G11
Prepared by:Meng Yali
EVERLIGHT ELECTRONICS CO.,LTD.
17-21/GHC-YR1S2/3T
Absolute Maximum Ratings (Ta=25℃)
Parameter
Reverse Voltage
Symbol
VR
Rating
5
Unit
V
mA
℃
Forward Current
IF
25
Operating Temperature
Storage Temperature
Electrostatic
Topr
Tstg
-40 ~ +85
-40~ +90
℃
ESD
Pd
150
110
100
V
Discharge(HBM)
Power Dissipation
Peak Forward Current
(Duty 1/10 @1KHz)
mW
mA
IFP
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Soldering Temperature
Tsol
Electro-Optical Characteristics (Ta=25℃)
Parameter
Luminous Intensity
Viewing Angle
Symbol Min.
Typ.
Max. Unit Condition
285
Iv
112
-----
-----
mcd
deg
nm
2θ1/2
λp
140
518
-----
-----
Peak Wavelength
Dominant Wavelength
IF=20mA
VR=5V
λd
520
-----
35
535
nm
Spectrum Radiation
Bandwidth
△λ
VF
-----
nm
V
-----
Forward Voltage
-----
-----
3.3
3.7
50
Reverse Current
IR
-----
μA
Notes:
1.Tolerance of Luminous Intensity ±10%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.10V
Everlight Electronics Co., Ltd.
http://www.everlight.com
Prepared date:18-Aug-2005
Rev. 1
Page: 3 of 10
Device No.；SZ DSE-171-G11
Prepared by:Meng Yali
EVERLIGHT ELECTRONICS CO.,LTD.
17-21/GHC-YR1S2/3T
Bin Range Of Dom. Wavelength
Groups
Bin
X
Min
520
525
530
Max
525
530
535
Unit
nm
Condition
Y
IF=20mA
Y
Z
Bin Range Of Luminous Intensity
Bin
R1
R2
S1
Min
112
140
180
225
Max
Unit
mcd
Condition
140
180
225
285
IF=20mA
S2
Notes:
1.Tolerance of Luminous Intensity ±10%
2.Tolerance of Dominant Wavelength ±1nm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 4 of 10
Device No.；SZ DSE-171-G11
Prepared date:18-Aug-2005
Prepared by:Meng Yali
EVERLIGHT ELECTRONICS CO.,LTD.
17-21/GHC-YR1S2/3T
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd.
http://www.everlight.com
Prepared date:18-Aug-2005
Rev. 1
Page: 5 of 10
Device No.；SZ DSE-171-G11
Prepared by:Meng Yali
EVERLIGHT ELECTRONICS CO.,LTD.
17-21/GHC-YR1S2/3T
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
xxxxxx
xxxxxx
RoHS
xxxxxxxxxxxx
xxxx
xxxxxxxx
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm, Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Prepared date:18-Aug-2005
Rev. 1
Page: 6 of 10
Device No.；SZ DSE-171-G11
Prepared by:Meng Yali
EVERLIGHT ELECTRONICS CO.,LTD.
17-21/GHC-YR1S2/3T
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm.
Moisture Resistant Packaging
Aluminum moisture-proof bag
Label
Desiccant
Label
Everlight Electronics Co., Ltd.
http://www.everlight.com
Prepared date:18-Aug-2005
Rev. 1
Page: 7 of 10
Device No.；SZ DSE-171-G11
Prepared by:Meng Yali
EVERLIGHT ELECTRONICS CO.,LTD.
17-21/GHC-YR1S2/3T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level：90%
LTPD：10%
Test
Hours/Cycles
Sample
Size
No.
1
Items
Test Condition
Ac/Re
0/1
Temp. : 260℃±5℃
Reflow Soldering
22 PCS.
6 Min.
Min. 5sec.
H : +100℃ 15min
300 Cycles
300 Cycles
2
Temperature Cycle
Thermal Shock
22 PCS.
0/1
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
3
4
22 PCS.
22 PCS.
0/1
0/1
∫ 10 sec
L : -10℃ 5min
High Temperature
Storage
Low Temperature
Storage
1000 Hrs.
1000 Hrs.
Temp. : 100℃
Temp. : -40℃
5
6
7
22 PCS.
22 PCS.
22 PCS.
0/1
0/1
0/1
DC Operating Life
IF = 20 mA
1000 Hrs.
1000 Hrs.
High Temperature /
High Humidity
85℃/ 85%RH
Everlight Electronics Co., Ltd.
http://www.everlight.com
Prepared date:18-Aug-2005
Rev. 1
Page: 8 of 10
Device No.；SZ DSE-171-G11
Prepared by:Meng Yali
EVERLIGHT ELECTRONICS CO.,LTD.
17-21/GHC-YR1S2/3T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90% RH or less.
2.3 After opening the package : The LEDs should be kept at 30℃ or less and 60% RH or less(Floor life).
However, it's recommended that the LEDs should be used within 168 hours (7 days) after opening
the package. If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Prepared date:18-Aug-2005
Rev. 1
Page: 9 of 10
Device No.；SZ DSE-171-G11
Prepared by:Meng Yali
EVERLIGHT ELECTRONICS CO.,LTD.
17-21/GHC-YR1S2/3T
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and
do soldering of each terminal. Be careful because the damage of the product is often started at the time
of the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable,
a double-head soldering iron should be used (as below figure). It should be confirmed beforehand
whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
http://www.everlight.com
Prepared date:18-Aug-2005
Rev. 1
Page: 10 of 10
Device No.；SZ DSE-171-G11
Prepared by:Meng Yali
相关型号：
©2020 ICPDF网 联系我们和版权申明