H11L3S(TB) [EVERLIGHT]

Logic IC Output Optocoupler;
H11L3S(TB)
型号: H11L3S(TB)
厂家: EVERLIGHT ELECTRONICS CO., LTD    EVERLIGHT ELECTRONICS CO., LTD
描述:

Logic IC Output Optocoupler

文件: 总11页 (文件大小:697K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
6 PIN DIP SCHMITT TRIGGER PHOTOCOUPLER  
H11LX Series  
Schematic  
Features:  
High data rate, 1MHz typical (NRZ)  
• Free from latch up and oscillation throughout voltage and temperature ranges.  
• Microprocessor compatible drive  
Pin Configuration  
1. Anode  
2. Cathode  
3. No Connection  
4. VO  
5. GND  
6. VCC  
• Logic compatible output sinks 16mA at 0.4V maximum  
• Guaranteed on/off threshold hysteresis  
• Wide supply voltage capability, compatible with all popular logic systems  
High isolation voltage between input and output (Viso=5000 V rms )  
Compact dual-in-line package  
Pb free and RoHS compliant.  
UL approved (No. E214129)  
VDE approved (No. 132249)  
SEMKO approved  
Truth Table  
NEMKO approved  
DEMKO approved  
FIMKO approved  
CSA approved  
Description  
The H11LX series of devices each consist of a GaAs infrared emitting diode optically coupled a high speed  
integrated circuit detector. The output detector incorporates a Schmitt trigger, which provides hysteresis for noise  
immunity and pulse shaping.  
The devices are in a 6-pin DIP package and available in wide-lead spacing and SMD option.  
Applications  
Logic to logic isolator  
Programmable current level sensor  
Line receiver  
eliminate noise and transient problems  
AC to TTL conversion  
square wave shaping  
Digital programming of power supplies  
Interfaces computers with peripherals  
1
Copyright © 2010, Everlight All Rights Reserved. Release Date : May 13, 2013. Issue No: DPC-0000022 Rev 3  
www.everlight.com  
DATASHEET  
6 PIN DIP Schmitt Trigger PHOTOCOUPLER  
H11LX Series  
Absolute Maximum Ratings (Ta=25)  
Parameter  
Symbol  
Rating  
Unit  
Forward current  
Reverse voltage  
60  
6
mA  
V
Input  
IF  
VR  
120  
0 to 16  
3 to 16  
50  
mW  
V
PD  
Vo  
Power dissipation  
V45 Allowed Range  
Output  
V
V65 Allowed Range  
Output Current  
VCC  
I0  
mA  
power dissipation  
PD  
150  
250  
mW  
mW  
V rms  
°C  
Total power dissipation  
Isolation voltage  
Ptot  
Viso  
Topr  
Tstg  
Tsol  
5000  
Operating temperature  
Storage temperature  
Soldering temperature *2  
-55~+100  
-55~+150  
260  
°C  
°C  
Notes:  
*1 AC for 1 minute, R.H.= 40 ~ 60% R.H. In this test, pins 1, 2 & 3 are shorted together, and pins 4, 5 & 6 are shorted together.  
*2 For 10 seconds  
2
Copyright © 2010, Everlight All Rights Reserved. Release Date : October 5, 2012. Issue No: DPC-0000022 Rev. 3  
www.everlight.com  
DATASHEET  
6 PIN DIP Schmitt Trigger PHOTOCOUPLER  
H11LX Series  
Electro-Optical Characteristics (Ta=25unless specified otherwise)  
Input  
Parameter  
Symbol  
Min.  
Typ.*  
Max.  
Unit  
Condition  
IF = 10mA  
-
-
-
1.15  
1.5  
10  
V
VF  
IR  
Forward Voltage  
-
-
µA  
pF  
VR = 5V  
Reverse Current  
Input capacitance  
100  
V=0, f=1MHz  
CJ  
Output  
Parameter  
Symbol  
Min.  
Typ.*  
Max.  
Unit  
Condition  
3
-
1.6  
-
15  
5
V
VCC  
ICC(off)  
IOH  
Operation Voltage Range  
Supply Current  
-
mA  
µA  
IF=0mA, Vcc=5V  
IF=0mA, Vcc=Vo=15V  
VI-O=500VDC  
-
100  
-
Output Current, High  
Isolation Resistance  
-
RISO  
1011  
Transfer Characteristics  
Max.  
5
Unit  
mA  
Parameter  
Symbol  
ICC(on)  
Min  
-
Typ.  
1.6  
Condition  
Supply Current  
IF=10mA, Vcc=5V  
Vcc=5V, IF=IFon(max.),  
RL=270  
Output Voltage .low  
-
-
0.4  
V
VOL  
H11L1  
-
-
-
-
-
-
1.6  
10  
5
Turn on  
Threshold  
H11L2  
mA  
mA  
Vcc=5V, RL=270  
IFon  
Current 1  
H11L3  
-
1
-
Vcc=5V, RL=270  
Vcc=5V, RL=270  
IFoff  
Turn off Threshold Current  
Hysteresis Ratio  
Turn on Time  
Fall Time  
0.5  
-
-
0.9  
4
-
IFoff /IFon  
S
S
-
-
-
-
-
ton  
tr  
toff  
tr  
Vcc=5V,  
IF=IFon,  
0.1  
-
S
4
-
RL=270  
Turn off Time  
Rise Time  
S
0.1  
1
-
MHz  
Data Rate  
* Typical values at Ta = 25°C  
1. Max. IF(ON) is the maximum current required to trigger the output. For examples, a 1.6mA maximum trigger current  
would require the LED to be driven at a current greater than 1.6mA to guarantee the device will turn on. A 10% guard  
band is recommended to account for degradation of the LED over its lifetime. The maximum allowable LED drive  
current is 60mA.  
3
Copyright © 2010, Everlight All Rights Reserved. Release Date : October 5, 2012. Issue No: DPC-0000022 Rev. 3  
www.everlight.com  
DATASHEET  
6 PIN DIP Schmitt Trigger PHOTOCOUPLER  
H11LX Series  
Typical Electro-Optical Characteristics Curves  
4
Copyright © 2010, Everlight All Rights Reserved. Release Date : October 5, 2012. Issue No: DPC-0000022 Rev. 3  
www.everlight.com  
DATASHEET  
6 PIN DIP Schmitt Trigger PHOTOCOUPLER  
H11LX Series  
Figure 7. Switching Time Test Circuit & Waveforms  
Order Information  
Part Number  
H11LXY(Z)-V  
Note  
X
Y
Z
V
= Part No. for 1, 2 or 3  
= Lead form option (S, S1, M or none)  
= Tape and reel option (TA, TB or none).  
= VDE (optional)  
Option  
Description  
Packing quantity  
65 units per tube  
None  
Standard DIP-6  
M
Wide lead bend (0.4 inch spacing)  
65 units per tube  
1000 units per reel  
1000 units per reel  
1000 units per reel  
1000 units per reel  
S + TA  
S + TB  
S1 + TA  
S1 + TB  
Surface mount lead form + TA tape & reel option  
Surface mount lead form + TB tape & reel option  
Surface mount lead form (low profile) + TA tape & reel option  
Surface mount lead form (low profile) + TB tape & reel option  
5
Copyright © 2010, Everlight All Rights Reserved. Release Date : October 5, 2012. Issue No: DPC-0000022 Rev. 3  
www.everlight.com  
DATASHEET  
6 PIN DIP Schmitt Trigger PHOTOCOUPLER  
H11LX Series  
Package Dimension (Dimensions in mm)  
Standard DIP Type  
Option M Type  
6
Copyright © 2010, Everlight All Rights Reserved. Release Date : October 5, 2012. Issue No: DPC-0000022 Rev. 3  
www.everlight.com  
DATASHEET  
6 PIN DIP Schmitt Trigger PHOTOCOUPLER  
H11LX Series  
Option S Type  
Option S1 Type  
7
Copyright © 2010, Everlight All Rights Reserved. Release Date : October 5, 2012. Issue No: DPC-0000022 Rev. 3  
www.everlight.com  
DATASHEET  
6 PIN DIP Schmitt Trigger PHOTOCOUPLER  
H11LX Series  
Recommended pad layout for surface mount leadform  
Device Marking  
EL  
H11L3  
YWWV  
Notes  
EL  
H11L3  
Y
WW  
V
denotes Everlight  
denotes Device Number  
denotes 1 digit Year code  
denotes 2 digit Week code  
denotes VDE (optional)  
8
Copyright © 2010, Everlight All Rights Reserved. Release Date : October 5, 2012. Issue No: DPC-0000022 Rev. 3  
www.everlight.com  
DATASHEET  
6 PIN DIP Schmitt Trigger PHOTOCOUPLER  
H11LX Series  
Tape & Reel Packing Specifications  
Option TA  
Option TB  
Direction of feed from reel  
Direction of feed from reel  
Tape dimensions  
Dimension No.  
A
B
Do  
D1  
E
F
Dimension(mm)  
Dimension No.  
Dimension(mm)  
10.4 0.1  
Po  
7.5 0.1  
P1  
1.5 0.1  
P2  
1.5+0.1/-0  
t
1.75 0.1  
W
7.5 0.1  
K
4.0 0.15  
12 0.1  
2.0 0.1  
0.35 0.03  
16.0 0.2  
4.5 0.1  
9
Copyright © 2010, Everlight All Rights Reserved. Release Date : October 5, 2012. Issue No: DPC-0000022 Rev. 3  
www.everlight.com  
DATASHEET  
6 PIN DIP Schmitt Trigger PHOTOCOUPLER  
H11LX Series  
Precautions for Use  
1. Soldering Condition  
1.1 (A) Maximum Body Case Temperature Profile for evaluation of Reflow Profile  
Note:  
Reference: IPC/JEDEC J-STD-020D  
Preheat  
Temperature min (Tsmin  
)
150 °C  
200°C  
Temperature max (Tsmax  
)
Time (Tsmin to Tsmax) (ts)  
Average ramp-up rate (Tsmax to Tp)  
60-120 seconds  
3 °C/second max  
Other  
Liquidus Temperature (TL)  
217 °C  
Time above Liquidus Temperature (t L)  
Peak Temperature (TP)  
60-100 sec  
260°C  
Time within 5 °C of Actual Peak Temperature: TP - 5°C  
Ramp- Down Rate from Peak Temperature  
30 s  
6°C /second max.  
Time 25°C to peak temperature  
Reflow times  
8 minutes max.  
3 times  
.
10  
Copyright © 2010, Everlight All Rights Reserved. Release Date : October 5, 2012. Issue No: DPC-0000022 Rev. 3  
www.everlight.com  
DATASHEET  
6 PIN DIP Schmitt Trigger PHOTOCOUPLER  
H11LX Series  
DISCLAIMER  
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above  
specification.  
2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these  
specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which  
does not comply with the absolute maximum ratings and the instructions included in these specification sheets.  
3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t  
reproduce or cause anyone to reproduce them without EVERLIGHT’s consent.  
11  
Copyright © 2010, Everlight All Rights Reserved. Release Date : October 5, 2012. Issue No: DPC-0000022 Rev. 3  
www.everlight.com  

相关型号:

H11L3S(TB)-V

Logic IC Output Optocoupler
EVERLIGHT

H11L3S-M

1 CHANNEL LOGIC OUTPUT OPTOCOUPLER, 1 Mbps, SURFACE MOUNT, DIP-6
FAIRCHILD

H11L3S1

Trigger Device Output Optocoupler,
EVERLIGHT

H11L3S1(TA)

Logic IC Output Optocoupler, 1-Element, 5000V Isolation, 1MBps, ROHS COMPLIANT, SURFACE MOUNT, DIP-6
EVERLIGHT

H11L3S1(TA).(TB)-V

6 PIN DIP PHOTO COUPLER
EVERLIGHT

H11L3S1(TB)

Logic IC Output Optocoupler, 1-Element, 5000V Isolation, 1MBps, ROHS COMPLIANT, SURFACE MOUNT, DIP-6
EVERLIGHT

H11L3S1(TB)-V

Logic IC Output Optocoupler, 1-Element, 5000V Isolation, 1MBps, ROHS COMPLIANT, SURFACE MOUNT, DIP-6
EVERLIGHT

H11L3SG

Schmitt Trigger Output 6-Pin Optocoupler
CTMICRO

H11L3SL

Schmitt Trigger Output 6-Pin Optocoupler
CTMICRO

H11L3SLG

Schmitt Trigger Output 6-Pin Optocoupler
CTMICRO

H11L3SLT1

Schmitt Trigger Output 6-Pin Optocoupler
CTMICRO

H11L3SLT1G

Schmitt Trigger Output 6-Pin Optocoupler
CTMICRO