IRM-2740 [EVERLIGHT]

Infrared Remote-control Receiver Module; 红外遥控接收模块
IRM-2740
型号: IRM-2740
厂家: EVERLIGHT ELECTRONICS CO., LTD    EVERLIGHT ELECTRONICS CO., LTD
描述:

Infrared Remote-control Receiver Module
红外遥控接收模块

遥控
文件: 总10页 (文件大小:290K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
EVERLIGHT ELECTRONICS CO.,LTD.  
Technical Data Sheet  
Infrared Remote-control Receiver Module  
IRM-27xx SERIES  
Features :  
• Photo detector and preamplifier in one package  
• Internal filter for PCM frequency  
• Improved shielding against electrical field disturbance  
• TTL and CMOS compatibility  
• Output active low  
• Low power consumption  
• Improved immunity against ambient light  
• Suitable burst length 10 cycles/burst  
• Pb free  
•The product itself will remain within RoHS compliant version.  
Descriptions  
The device is a miniature type infrared remote control system  
receiver which has been developed and designed by utilizing the  
most updated IC technology. The PIN diode and preamplifier are  
assembled on lead frame, the epoxy package is designed as an IR  
filter. The demodulated output signal can directly be decoded by a  
microprocessor.  
Applications  
Light detecting portion of remote control  
AV instruments such as Audio, TV, VCR, CD, MD, etc.  
Home appliances such as Air-conditioner, Fan , etc.  
The other equipments with wireless remote control.  
CATV set top boxes  
Multi-media Equipment  
PART  
MATERIAL  
COLOR  
Chip  
Silicon  
Black  
Compound  
Epoxy  
Black  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Rev 1  
Page: 1 of 10  
Device NoSZDMO-027-025  
Prepared date5-Apr-2007  
Prepared byHuayan.Peng  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-27xx SERIES  
Package Dimensions  
Unit:mm  
Notes: 1.All dimensions are in millimeters.  
2.Tolerances unless dimensions ±0.3mm.  
Available Types For Different Carrier Frequencies  
Type  
Carrier Frequencies (Typ)  
IRM-2733  
IRM-2736  
IRM-2738  
IRM-2740  
IRM-2756  
33 kHz  
36 kHz  
38 kHz  
40 kHz  
56 kHz  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Prepared date5-Apr-2007  
Rev 1  
Page: 2 of 10  
Device NoSZDMO-027-025  
Prepared byHuayan.Peng  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-27xx SERIES  
Absolute Maximum Ratings (Ta=25)  
Parameter  
Symbol  
Rating  
Unit  
Notice  
Supply Voltage  
Vcc  
Topr  
Tstg  
0~6  
V
Operating Temperature  
Storage Temperature  
-25 ~ +80  
-40 ~ +85  
4mm from mold body  
less than 10 seconds  
Soldering Temperature  
Tsol  
260  
Recommended Operating Condition  
Supply Voltage Rating: Vcc 4.5V to 5.5V  
Electro-Optical Characteristics (Ta=25, and Vcc=5.0V)  
Parameter  
Symbol  
MIN.  
TYP.  
MAX.  
Unit  
Condition  
mA No signal input  
nm  
Consumption Current  
Peak Wavelength  
Icc  
---  
---  
1.2  
---  
---  
λp  
940  
L0  
14  
6
---  
---  
---  
---  
m
Reception Distance  
L45  
At the ray axis  
deg  
*1  
Θh  
Θv  
TH  
TL  
Half Angle(Horizontal)  
Half Angle(Vertical)  
---  
---  
45  
45  
---  
---  
---  
---  
deg  
μs  
High Level Pulse Width  
Low Level Pulse Width  
400  
400  
800  
800  
At the ray axis  
*2  
μs  
High Level Output Voltage  
Low Level Output Voltage  
VH  
VL  
4.5  
---  
---  
---  
V
V
0.2  
0.5  
*1:The ray receiving surface at a vertex and relation to the ray axis in the range of θ= 0° and θ=45°.  
*2:A range from 30cm to the arrival distance. Average value of 50 pulses.  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Rev 1  
Page: 3 of 10  
Device NoSZDMO-027-025  
Prepared date5-Apr-2007  
Prepared byHuayan.Peng  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-27xx SERIES  
Test Method:  
The specified electro-optical characteristics is satisfied under the following  
Conditions at the controllable distance.  
cMeasurement place  
A place that is nothing of extreme light reflected in the room.  
dExternal light  
Project the light of ordinary white fluorescent lamps which are not high  
Frequency lamps and must be less then 10 Lux at the module surface.  
(Ee10Lux)  
eStandard transmitter  
A transmitter whose output is so adjusted as to Vo=400mVp-p and the output  
Wave form shown in Fig.-1.According to the measurement method shown in  
Fig.-2 the standard transmitter is specified.  
However , the infrared photodiode to be used for the transmitter should be  
λp=940nm,∆λ=50nm. Also, photodiode is used of PD438B(Vr=5V).  
fMeasuring system  
According to the measuring system shown in Fig.-3  
Fig.-1 Transmitter Wave Form  
D.U.T output Pulse  
Carrier frequency is adjusted to  
center frequency of each product.  
OUTPUT PULSE  
OF DEVICE  
IR TANSMITTER  
OUTPUT WAVE FORM  
Duty=0.5  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Rev 1  
Page: 4 of 10  
Device NoSZDMO-027-025  
Prepared date5-Apr-2007  
Prepared byHuayan.Peng  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-27xx SERIES  
Fig.-2 Measuring Method  
Fig.-3  
Measuring System  
20cm  
10k  
+5.0± 0.1V  
L: Transmission Distance  
Vcc  
OUT  
10uF  
θ
θ
D.U.T  
Standard Transmitter  
Vout  
Standard Transmitter  
Vout  
GND  
θ: Angle Of Horizontal & Vertical Direction  
Oscilloscope  
Block Diagram  
Vs  
IN  
OUT  
µC  
Input  
CGA & filter  
Demodulator  
Oscillator  
AGC/ATC & digital control  
Carrier frequency f0  
Modulated IR signal  
min 10 pulses  
GND  
Application Circuit:  
RC Filter should be connected closely between Vcc pin and GND pin.  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Rev 1  
Page: 5 of 10  
Device NoSZDMO-027-025  
Prepared date5-Apr-2007  
Prepared byHuayan.Peng  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-27xx SERIES  
Typical Electro-Optical Characteristics Curves  
Fig.-4 Relative Spectral Sensitivity vs.  
Wavelength  
Fig.-5 Relative Transmission Distance vs.  
Direction  
θ
Fig.-6 Output Pulse Length vs. Arrival Distance Fig.-7 Arrival Distance vs. Supply Voltage  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Rev 1  
Page: 6 of 10  
Device NoSZDMO-027-025  
Prepared date5-Apr-2007  
Prepared byHuayan.Peng  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-27xx SERIES  
Typical Electro-Optical Characteristics Curves  
Fig.-8 Relative Transmission Distance vs. Center Carrier Frequency  
IRM-2733  
IRM-2736  
Center Carrier Frequency (kHz)  
Center Carrier Frequency (kHz)  
IRM-2738  
IRM-2740  
Center Carrier Frequency (kHz)  
Center Carrier Frequency (kHz)  
Everlight Electronics Co., Ltd.  
Device NoSZDMO-027-025  
http:\\www.everlight.com  
Rev 1  
Page: 7 of 10  
Prepared date5-Apr-2007  
Prepared byHuayan.Peng  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-27xx SERIES  
Fig.-8 Relative Transmission Distance vs. Center Fig.-9 Arrival Distance vs. Ambient Temperature  
Carrier Frequency  
IRM-2756  
17.5  
14.0  
10.5  
7.0  
3.5  
Center Carrier Frequency (kHz)  
Ambient Temperature Ta (°C)  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Rev 1  
Page: 8 of 10  
Device NoSZDMO-027-025  
Prepared date5-Apr-2007  
Prepared byHuayan.Peng  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-27xx SERIES  
Reliability Test Item And Condition  
The reliability of products shall be satisfied with items listed below.  
Confidence level90%  
LTPD10%  
Failure Judgement  
Criteria  
Samples(n)  
Defective(c)  
Test Items  
Test Conditions  
1 cycle -40℃  
(15min)(5min)(15min)  
300 cycle test  
+100℃  
Temperature cycle  
n=22,c=0  
Temp: +100℃  
High temperature test Vcc:6V  
1000hrs  
n=22,c=0  
n=22,c=0  
n=22,c=0  
n=22,c=0  
L0L×0.8  
L45L×0.8  
Temp: -40℃  
Low temperature  
storage  
1000hrs  
L: Lower s  
pecification limit  
Ta: 85,RH:85%  
High temperature  
High humidity  
1000hrs  
Temp: 260±510sec  
Solder heat  
4mm From the bottom of the package.  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Rev 1  
Page: 9 of 10  
Device NoSZDMO-027-025  
Prepared date5-Apr-2007  
Prepared byHuayan.Peng  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-27xx SERIES  
Packing Quantity Specification  
1. 1500PCS/1Box  
2. 10Boxes/1Carton  
Label Form Specification  
CPN: Customer’s Production Number  
P/N : Production Number  
QTY: Packing Quantity  
CAT: Ranks  
HUE: Peak Wavelength  
REF: Reference  
IRM-2738  
LOT No: Lot Number  
MADE IN TAIWAN: Production Place  
Notes  
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on  
material change for above specification.  
2. When using this product, please observe the absolute maximum ratings and the instructions  
for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for  
any damage resulting from use of the product which does not comply with the absolute  
maximum ratings and the instructions included in these specification sheets.  
3. These specification sheets include materials protected under copyright of EVERLIGHT  
corporation. Please don’t reproduce or cause anyone to reproduce them without  
EVERLIGHT’s consent.  
EVERLIGHT ELECTRONICS CO., LTD.  
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,  
Tucheng, Taipei 236, Taiwan, R.O.C  
Tel: 886-2-2267-2000, 2267-9936  
Fax: 886-2267-6244, 2267-6189, 2267-6306  
http:\\www.everlight.com  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Prepared date5-Apr-2007  
Rev 1  
Page: 10 of 10  
Device NoSZDMO-027-025  
Prepared byHuayan.Peng  

相关型号:

IRM-2740-E

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-2740A

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-2740T

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-2740V

Logic Output Photo IC, ROHS COMPLIANT, PLASTIC PACKAGE-3
EVERLIGHT

IRM-2756

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-2756-E

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-2756A

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-2756T

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-27XX

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-27XX-E

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-27XXA

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-27XXT

Infrared Remote-control Receiver Module
EVERLIGHT