IRM-8601K-5-M [EVERLIGHT]

Linear Output Photo IC, LEAD FREE, MINIATURE, PLASTIC PACKAGE-3;
IRM-8601K-5-M
型号: IRM-8601K-5-M
厂家: EVERLIGHT ELECTRONICS CO., LTD    EVERLIGHT ELECTRONICS CO., LTD
描述:

Linear Output Photo IC, LEAD FREE, MINIATURE, PLASTIC PACKAGE-3

文件: 总8页 (文件大小:189K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Infrared Remote Control  
Receiver Module  
IRM-8601K-M Series  
Features  
High protection ability against EMI.  
Circular lens to improve the receive characteristic.  
Line-up for various center carrier frequencies.  
Low voltage and low power consumption.  
High immunity against ambient light.  
Photodiode with integrated circuit.  
TTL and CMOS compatibility.  
Long reception distance.  
High sensitivity.  
Pb free  
1 2 3  
Description  
The IRM-8601K-M series device are miniature type  
infrared remote control system receiver which has  
been developed and designed by utilizing the most  
updated IC technology.  
The PIN diode and preamplifier are assembled on  
lead frame, the epoxy package is designed as an IR  
filter.  
Pin Configuration  
1. OUT  
2. GND  
3. VS  
The demodulated output signal can directly be  
decoded by a microprocessor.  
Applications  
• Light detecting portion of remote control  
• AV instruments such as Audio, TV, VCR, CD, MD, etc.  
• Home appliances such as Air-conditioner, Fan, etc.  
• The other equipments with wireless remote control.  
• CATV set top boxes  
• Multi-media Equipment  
Block Diagram  
Application Circuit  
RC Filter should be connected closely between Vcc pin and GND pin.  
Everlight Electronics Co., Ltd.  
Document NoDMO-0000046  
1
http://www.everlight.com  
February 3, 2009  
Rev. 1  
Infrared Remote Control  
Receiver Module  
IRM-8601K-M Series  
Parts Table  
Model No.  
Carrier Frequencies  
IRM-8601K-1-M  
IRM-8601K-2-M  
IRM-8601K-M  
IRM-8601K-4-M  
IRM-8601K-5-M  
33 kHz  
36 kHz  
38 kHz  
40 kHz  
56 kHz  
Package Dimenstions  
(Dimensions in mm)  
Notes:  
Tolerances unless dimensions ±0.3mm.  
Everlight Electronics Co., Ltd.  
Document NoDMO-0000046  
2
http://www.everlight.com  
February 3, 2009  
Rev. 1  
Infrared Remote Control  
Receiver Module  
IRM-8601K-M Series  
Absolute Maximum Ratings (Ta=25°C)  
Parameter  
Symbol  
Rating  
Unit  
Supply Voltage  
Vcc  
Topr  
Tstg  
Tsol  
6
V
Operating Temperature  
-25 ~ +85  
-40 ~ +85  
260  
Storage Temperature  
Soldering Temperature *1  
*1 4mm from mold body less than 10 seconds  
Electro-Optical Characteristics (Ta=25and Vcc=5.0V)  
Parameter  
Symbol MIN.  
TYP.  
MAX.  
Unit  
mA  
V
Condition  
No signal input  
Consumption Current  
Icc  
Vs  
---  
---  
-
2
Supply Voltage  
4.5  
5.5  
nm  
Peak Wavelength  
λp  
---  
940  
---  
L0  
8
4
---  
---  
---  
---  
m
Reception Distance  
L45  
At the ray axis  
*2  
deg  
deg  
Half Angle(Horizontal)  
Half Angle(Vertical)  
Θh  
Θv  
---  
---  
45  
45  
---  
---  
μs  
High Level Pulse Width  
Low Level Pulse Width  
High Level Output Voltage  
TH  
TL  
VH  
400  
400  
4.5  
---  
---  
---  
800  
800  
---  
At the ray axis  
*3  
μs  
V
V
Low Level Output Voltage  
VL  
---  
0.2  
0.5  
*2. The ray receiving surface at a vertex and relation to the ray axis in the range of θ=0° and θ=45°.  
*3. A range from 30cm to the arrival distance. Average value of 50 pulses.  
Everlight Electronics Co., Ltd.  
Document NoDMO-0000046  
3
http://www.everlight.com  
February 3, 2009  
Rev. 1  
Infrared Remote Control  
Receiver Module  
IRM-8601K-M Series  
Test Method  
The specified electro-optical characteristics is satisfied under the following Conditions at the controllable  
distance.  
1. Measurement place  
A place that is nothing of extreme light reflected in the room.  
2. External light  
Project the light of ordinary white fluorescent lamps which are not high  
Frequency lamps and must be less then 10 Lux at the module surface.  
(Ee10Lux)  
3. Standard transmitter  
A transmitter whose output is so adjusted as to Vo=400mVp-p and the output Wave form shown in  
Fig.-1.According to the measurement method shown in Fig.-2 the standard transmitter is specified. However,  
the infrared photodiode to be used for the transmitter should be λp=940nm,Δλ=50nm. Also, photodiode is  
used of PD438B (Vr=5V). (Standard light / Light source temperature 2856°K).  
4. Measuring system According to the measuring system shown in Fig.-3  
Fig.-1 Transmitter Wave Form  
D.U.T output Pulse  
Fig.-2 Measuring Method  
Fig.-3  
Measuring System  
Everlight Electronics Co., Ltd.  
Document NoDMO-0000046  
4
http://www.everlight.com  
February 3, 2009  
Rev. 1  
Infrared Remote Control  
Receiver Module  
IRM-8601K-M Series  
Typical Performance Curves  
Fig.-4 Relative Spectral Sensitivity vs. Wavelength  
Fig.-5 Relative Transmission Distance vs. Direction  
θ
Fig.-6 Output Pulse Length vs. Arrival Distance  
Fig.-7 Arrival Distance vs. Supply Voltage  
Everlight Electronics Co., Ltd.  
Document NoDMO-0000046  
5
http://www.everlight.com  
February 3, 2009  
Rev. 1  
Infrared Remote Control  
Receiver Module  
IRM-8601K-M Series  
Fig.-8 Relative Transmission Distance vs. Center  
Carrier Frequency  
Center Carrier Frequency (kHz)  
Center Carrier Frequency (kHz)  
Everlight Electronics Co., Ltd.  
Document NoDMO-0000046  
6
http://www.everlight.com  
February 3, 2009  
Rev. 1  
Infrared Remote Control  
Receiver Module  
IRM-8601K-M Series  
Fig.-9 Arrival Distance vs. Ambient Temperature  
20  
16  
12  
8
4
0
-40 -20  
0
20  
40  
60  
80 100  
Center Carrier Frequency (kHz)  
Ambient Temperature Ta (°C)  
Packing Quantity  
1000 pcs / Box  
10 Boxes / Carton  
Everlight Electronics Co., Ltd.  
Document NoDMO-0000046  
7
http://www.everlight.com  
February 3, 2009  
Rev. 1  
Infrared Remote Control  
Receiver Module  
IRM-8601K-M Series  
DISCLAIMER  
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change  
for above specification.  
2. When using this product, please observe the absolute maximum ratings and the instructions for use  
outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting  
from use of the product which does not comply with the absolute maximum ratings and the instructions  
included in these specification sheets.  
3. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in  
any form is prohibited without the specific consent of EVERLIGHT.  
Everlight Electronics Co., Ltd.  
Document NoDMO-0000046  
8
http://www.everlight.com  
February 3, 2009  
Rev. 1  

相关型号:

IRM-8601M2

Logic Output Photo IC,
EVERLIGHT

IRM-8601M2-2

Logic Output Photo IC,
EVERLIGHT

IRM-8601M2-4

Logic Output Photo IC,
EVERLIGHT

IRM-8601S

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-8601S-1

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-8601S-2

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-8601S-5

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-8601S-P

Infrared Remote-Control Receiver Module
EVERLIGHT

IRM-8601S_07

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-8602-P

Infrared Remote-Control Receiver Module
EVERLIGHT

IRM-8602K-1

Infrared Remote Control Receiver Module
EVERLIGHT

IRM-8602K-5

Technical Data Sheet Infrared Remote-control Receiver Module
EVERLIGHT