ITR8307-L24-TR8 [EVERLIGHT]

Opto Interrupter ITR; OPTO灭弧ITR
ITR8307-L24-TR8
型号: ITR8307-L24-TR8
厂家: EVERLIGHT ELECTRONICS CO., LTD    EVERLIGHT ELECTRONICS CO., LTD
描述:

Opto Interrupter ITR
OPTO灭弧ITR

文件: 总10页 (文件大小:322K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Technical Data Sheet  
Opto Interrupter ITR  
ITR8307/L24/TR8  
Features  
High sensitivity  
Cut-Off visible wavelength  
Thin  
Compact  
Pb free  
Descriptions  
ITR8307/L24/TR8 is a light reflection switch which includes  
a GaAs IR-LED transmitter and a NPN photo-darlington with a high  
photosensitive receiver for short distance, operating in the  
infrared range. Both components are mounted side- by- side in a  
plastic package.  
Applications  
Camera  
VCR  
Floppy disk driver  
Cassette type recorder  
Various microcomputer control equipment  
Device Selection Guide  
Device No.  
Chip Material  
GaAs  
IR  
PT  
Silicon  
Everlight Electronics Co., Ltd.  
http://www.everlight.com  
Prepared date:2009/03/23  
Rev. 2  
Page: 1 of 9  
Device NoDRX-0000011  
Prepared by: Vic Liao  
Revision : 2  
Release Date:2009-03-23 21:53:56.0  
LifecyclePhase:  
Expired Period: Forever  
ITR8307/L24/TR8  
Package Dimensions  
Notes: 1.All dimensions are in millimeters  
2.Tolerances unless dimensions ±0.25mm  
Absolute Maximum Ratings (Ta=25)  
Parameter  
Symbol  
Pd  
Ratings  
75  
Unit  
mW  
Power Dissipation at(or below) 25Free  
Air Temperature  
Reverse Voltage  
Input  
VR  
IF  
6
V
Forward Current  
50  
mA  
Peak Forward Current (*1)  
IFP  
1
A
Pulse width 100μs, Duty cycle=1%  
Collector Power Dissipation  
PC  
IC  
100  
20  
mW  
mA  
V
Collector Current  
Output  
Collector-Emitter Voltage  
B VCEO  
B VECO  
Topr  
Tstg  
15  
Emitter-Collector Voltage  
Operating Temperature  
6
V
-25~+85  
-30~+90  
260  
Storage Temperature  
Lead Soldering Temperature (*2)  
(1) tw=100 μsec. , T=10 msec.  
Tsol  
(2) t≦10 Sec  
Everlight Electronics Co., Ltd.  
http://www.everlight.com  
Prepared date:2009/03/23  
Rev 2  
Page: 2 of 10  
Device NoDRX-0000011  
Prepared by: Vic Liao  
Revision : 2  
Release Date:2009-03-23 21:53:56.0  
LifecyclePhase:  
Expired Period: Forever  
ITR8307/L24/TR8  
Electro-Optical Characteristics (Ta=25)  
Parameter  
Symbol  
Min.  
-
Max. Unit  
Conditions  
IF=20mA  
Typ.  
1.2  
Forward Voltage  
VF  
1.4  
10  
-
V
Input  
Reverse Current  
Peak Wavelength  
Dark Current  
IR  
λP  
-
-
-
940  
-
μA  
nm  
μA  
VR=6V  
-
VCE=10V,  
Ee=0mW/cm2  
VCE=2V,  
IF=4mA  
Output  
ICEO  
-
1
IC(ON)  
Collector Current  
0.5  
-
15.0 mA  
VCE=2V,  
IF=4mA  
Leakage Current  
ICEOD  
-
-
5
μA  
Transfer  
d=1mm  
Characteristics  
VCE=2V  
Rise time  
Fall time  
tr  
tf  
-
-
-
-
400  
400  
μs  
μs  
IC=10mA  
RL=100,  
d=1mm  
Reflector is Al deposited glass.  
Everlight Electronics Co., Ltd.  
http://www.everlight.com  
Prepared date:2009/03/23  
Rev 2  
Page: 3 of 10  
Device NoDRX-0000011  
Prepared by: Vic Liao  
Revision : 2  
Release Date:2009-03-23 21:53:56.0  
LifecyclePhase:  
Expired Period: Forever  
ITR8307/L24/TR8  
Typical Electrical/Optical/Characteristics Curves for IR  
Everlight Electronics Co., Ltd.  
http://www.everlight.com  
Prepared date:2009/03/23  
Rev 2  
Page: 4 of 10  
Device NoDRX-0000011  
Prepared by: Vic Liao  
Revision : 2  
Release Date:2009-03-23 21:53:56.0  
LifecyclePhase:  
Expired Period: Forever  
ITR8307/L24/TR8  
Typical Electrical/Optical/Characteristics Curves for PT  
Everlight Electronics Co., Ltd.  
http://www.everlight.com  
Prepared date:2009/03/23  
Rev 2  
Page: 5 of 10  
Device NoDRX-0000011  
Prepared by: Vic Liao  
Revision : 2  
Release Date:2009-03-23 21:53:56.0  
LifecyclePhase:  
Expired Period: Forever  
ITR8307/L24/TR8  
Typical Electrical/Optical/Characteristics Curves for ITR  
Everlight Electronics Co., Ltd.  
http://www.everlight.com  
Prepared date:2009/03/23  
Rev 2  
Page: 6 of 10  
Device NoDRX-0000011  
Prepared by: Vic Liao  
Revision : 2  
Release Date:2009-03-23 21:53:56.0  
LifecyclePhase:  
Expired Period: Forever  
ITR8307/L24/TR8  
Reliability Test Item And Condition  
The reliability of products shall be satisfied with items listed below.  
Confidence level90%  
LTPD10%  
NO. Item  
Test Conditions  
Test Hours/ Sample Failure  
Ac/Re  
Cycles  
Sizes  
Judgement  
Criteria  
TEMP.260±5℃  
1 Solder Heat  
10secs  
30mins 50Cycles  
5mins  
22pcs  
22pcs  
0/1  
0/1  
IRU×2  
2 Temperature Cycle H : +85℃  
EeL×0.8  
VFU×1.2  
L : -25℃  
30mins  
3 Thermal Shock  
H :+100℃  
L :-10℃  
5mins 50Cycles  
10secs  
22pcs  
0/1  
UUpper  
Specification  
Limit  
5mins  
TEMP.+100℃  
4 High Temperature  
Storage  
1000hrs  
1000hrs  
22pcs  
22pcs  
0/1  
0/1  
LLower  
Specification  
Limit  
TEMP.-30℃  
5 Low Temperature  
Storage  
6 DC Operating Life IF=20mA  
7 High Temperature/ 85/ 85% R.H  
High Humidity  
1000hrs  
1000hrs  
22pcs  
22pcs  
0/1  
0/1  
Everlight Electronics Co., Ltd.  
http://www.everlight.com  
Prepared date:2009/03/23  
Rev 2  
Page: 7 of 10  
Device NoDRX-0000011  
Prepared by: Vic Liao  
Revision : 2  
Release Date:2009-03-23 21:53:56.0  
LifecyclePhase:  
Expired Period: Forever  
ITR8307/L24/TR8  
Recommended Method of Storage  
The following are general recommendations for moisture sensitive level (MSL) 4 storage and use:  
Shelf life in sealed bag: 12 months at < 40 °C and < 90% relative humidity (RH)  
After bag is opened, devices that will be subjected to reflow solder or other high temperature  
process must  
a) Mounted within 72 hours of factory conditions < 30 °C/60%RH, or  
b) Stored at <20% RH  
Devices require bake, before mounting, if:  
Humidity Indicator Card is > 20% when read at 23 ± 5 °C  
If baking is required, devices may be baked:  
a) 192 hours at 40,and <5% RH(dry air/nitrogen) or  
b) 96 hours at 60,and <5% RH for all device containers  
c) 24 hours at 125 °C  
Soldering Condition  
a) Pb-free solder temperature profile  
b) Reflow soldering should not be done more than two times.  
c) When soldering, do not put stress on the LEDs during heating.  
d) After soldering, do not warp the circuit board.  
Repairing  
Repair should not be done after the LEDs have been soldered. When repairing is  
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed  
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.  
Everlight Electronics Co., Ltd.  
http://www.everlight.com  
Prepared date:2009/03/23  
Rev 2  
Page: 8 of 10  
Device NoDRX-0000011  
Prepared by: Vic Liao  
Revision : 2  
Release Date:2009-03-23 21:53:56.0  
LifecyclePhase:  
Expired Period: Forever  
ITR8307/L24/TR8  
Taping Dimension  
Reel Dimensions  
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm  
Moisture Resistant Packaging  
Aluminum  
moisture-proof bag  
MSL Label  
Label  
Label  
Desiccant  
Humidity indicator  
Everlight Electronics Co., Ltd.  
http://www.everlight.com  
Prepared date:2009/03/23  
Rev 2  
Page: 9 of 10  
Device NoDRX-0000011  
Prepared by: Vic Liao  
Revision : 2  
Release Date:2009-03-23 21:53:56.0  
LifecyclePhase:  
Expired Period: Forever  
ITR8307/L24/TR8  
Packing Quantity Specification  
1. 1000 Pcs/ 1Reel  
2. 15 Reel /1 Box  
3. 2 Box/ 1 Carton  
EVERLIGHT Label  
CPN: Customer’s Production Number  
Pb  
EVERLIGHT  
P/N : Production Number  
QTY: Packing Quantity  
CAT: None  
CPN :  
P
N
RoHS  
ITR8307/L24/TR8  
CAT :  
HUE :  
REF :  
QTY :1000  
HUE: None  
LOT NO :  
REF: Reference  
LOT No: Lot Number  
MADE IN TAIWAN: Production Place  
Reference :  
MADE IN TAIWAN  
Notes  
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on  
material change for above specification.  
2. When using this product, please observe the absolute maximum ratings and the instructions  
for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for  
any damage resulting from use of the product which does not comply with the absolute  
maximum ratings and the instructions included in these specification sheets.  
3. These specification sheets include materials protected under copyright of EVERLIGHT  
corporation. Please don’t reproduce or cause anyone to reproduce them without  
EVERLIGHT’s consent.  
EVERLIGHT ELECTRONICS CO., LTD.  
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,  
Tucheng, Taipei 236, Taiwan, R.O.C  
Tel: 886-2-2267-2000, 2267-9936  
Fax: 886-2267-6244, 2267-6189, 2267-6306  
http://www.everlight.com  
Everlight Electronics Co., Ltd.  
http://www.everlight.com  
Prepared date:2009/03/23  
Rev 2  
Page: 10 of 10  
Device NoDRX-0000011  
Prepared by: Vic Liao  
Revision : 2  
Release Date:2009-03-23 21:53:56.0  
LifecyclePhase:  
Expired Period: Forever  

相关型号:

ITR8307-TR8

Opto Interrupter
EVERLIGHT

ITR8307/F43

Opto Interrupter
EVERLIGHT

ITR8307/L24

Transistor Output Optocoupler
EVERLIGHT

ITR8307/L24/F43ITR8307

Darlington Output Optocoupler, LEAD FREE, PLASTIC PACKAGE-4
EVERLIGHT

ITR8307/L24/TR8

Transistor Output Slotted Switch
EVERLIGHT

ITR8307/L24ITR8307

Optoelectronic Device, LEAD FREE, PLASTIC PACKAGE-4
EVERLIGHT

ITR8307/TR8

Opto Interrupter
EVERLIGHT

ITR8307/TR8ITR8307

SPECIALTY OPTOELECTRONIC DEVICE, ROHS COMPLIANT PACKAGE-4
EVERLIGHT

ITR8307TR8

Opto Interrupter
EVERLIGHT

ITR8307_06

OPTO INTERRUPTER ITR
EVERLIGHT

ITR8402-A

ITR8402-A
ETC

ITR8402-A/F3

Optoelectronic Device,
EVERLIGHT