Y2C-CP1Q2B [EVERLIGHT]
Chip LED (0.8mm Height); LED芯片（ 0.8毫米高）
| 型号： | Y2C-CP1Q2B |
| 厂家： | 
EVERLIGHT ELECTRONICS CO., LTD |
| 描述： | Chip LED (0.8mm Height) |
| 文件： | 总10页 (文件大小：224K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
0603 Package Chip LED (0.8mm Height)
19-21/Y2C-CP1Q2B/3T
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Mono-color type.
․Pb-free.
․The product itself will remain with in RoHS complaint version.
Descriptions
․The 19-21 SMD LED is much smaller than lead
frame type components, thus enable smaller board
size, higher packing density, reduced storage space
and finally smaller equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip
Part No.
Emitted Color
Brilliant Yellow
Resin Color
Water Clear
Material
AlGaInP
19-21/Y2C-CP1Q2/3T
Everlight Electronics Co., Ltd.
Device No: SZDSE-191-Y21
http://www.everlight.com
Prepared date: 27-Oct-2007
Rev.1
Page: 1 of 10
Prepared by:Zhouhua
EVERLIGHT ELECTRONICS CO.,LTD.
19-21/Y2C-CP1Q2B/3T
Package Outline Dimensions
-
+
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No: SZDSE-191-Y21
http://www.everlight.com
Prepared date: 27-Oct-2007
Rev.1
Page: 2 of 10
Prepared by:Zhouhua
EVERLIGHT ELECTRONICS CO.,LTD.
19-21/Y2C-CP1Q2B/3T
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
Forward Current
VR
IF
5
V
25
mA
Peak Forward Current
(Duty 1/10 @1KHz)
IFP
60
mA
Power Dissipation
Electrostatic Discharge(HBM)
Operating Temperature
Storage Temperature
Pd
60
mW
V
ESD
Topr
Tstg
2000
-40 ~ +85
-40 ~ +90
℃
℃
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Soldering Temperature
Tsol
Electro-Optical Characteristics (Ta=25℃)
Parameter
Luminous Intensity
Viewing Angle
Symbol Min.
Typ.
Max.
Unit
mcd
deg
Condition
IF=20mA
VR=5V
IV
2θ1/2
λp
45.0
----
-----
100
591
112
----
----
Peak Wavelength
----
nm
Dominant Wavelength
585.5
----
----
15
591.5
----
2.4
λd
△λ
VF
nm
nm
V
Spectrum Radiation
Bandwidth
Forward Voltage
Reverse Current
1.7
2.0
----
IR
----
10
μA
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.1V
Everlight Electronics Co., Ltd.
Device No: SZDSE-191-Y21
http://www.everlight.com
Prepared date: 27-Oct-2007
Rev.1
Page: 3 of 10
Prepared by:Zhouhua
EVERLIGHT ELECTRONICS CO.,LTD.
19-21/Y2C-CP1Q2B/3T
Bin Range Of Dom. Wavelength
Groups
Bin
D3
D4
Min
585.5
588.5
Max
588.5
591.5
Unit
nm
Condition
IF=20mA
C
Bin Range Of Luminous Intensity
Bin
P1
Min
45.0
57.0
72.0
90.0
Max
Unit
mcd
Condition
IF=20mA
57.0
72.0
90.0
112
P2
Q1
Q2
Bin Range Of Forward Voltage
Group
Bin
0
Min
1.75
1.95
2.15
Max
1.95
2.15
2.35
Unit
Condition
IF=20mA
B
V
1
2
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.1V
Everlight Electronics Co., Ltd.
Device No: SZDSE-191-Y21
http://www.everlight.com
Prepared date: 27-Oct-2007
Rev.1
Page: 4 of 10
Prepared by:Zhouhua
EVERLIGHT ELECTRONICS CO.,LTD.
19-21/Y2C-CP1Q2B/3T
Typical Electro-Optical Characteristics Curves
Ta=25°C
Ta=25°C
Wavelength λ(nm)
Forward Voltage V (V)
F
Ta=25°C
)
Ambient Temperature T (°C
Forward Current I (mA)
a
Ta=25°C
Ambient Temperature T (°C )
a
Everlight Electronics Co., Ltd.
Device No: SZDSE-191-Y21
http://www.everlight.com
Prepared date: 27-Oct-2007
Rev.1
Page: 5 of 10
Prepared by:Zhouhua
EVERLIGHT ELECTRONICS CO.,LTD.
19-21/Y2C-CP1Q2B/3T
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
xxxxxx
xxxxxx
RoHS
xxxxxxxxxxxx
xxxx
xxxxxxxx
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm , Unit = mm
Everlight Electronics Co., Ltd.
Device No: SZDSE-191-Y21
http://www.everlight.com
Prepared date: 27-Oct-2007
Rev.1
Page: 6 of 10
Prepared by:Zhouhua
EVERLIGHT ELECTRONICS CO.,LTD.
19-21/Y2C-CP1Q2B/3T
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Aluminum moisture-proof bag
Label
Desiccant
Label
Everlight Electronics Co., Ltd.
Device No: SZDSE-191-Y21
http://www.everlight.com
Prepared date: 27-Oct-2007
Rev.1
Page: 7 of 10
Prepared by:Zhouhua
EVERLIGHT ELECTRONICS CO.,LTD.
19-21/Y2C-CP1Q2B/3T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level：90%
LTPD：10%
Test
Hours/Cycles
Sample
Size
No.
1
Items
Test Condition
Ac/Re
0/1
Temp. : 260℃±5℃
Reflow Soldering
22 PCS.
6 Min.
Min. 5sec.
H : +100℃ 15min
300 Cycles
300 Cycles
2
Temperature Cycle
Thermal Shock
22 PCS.
0/1
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
3
4
22 PCS.
22 PCS.
0/1
0/1
∫ 10 sec
L : -10℃ 5min
High Temperature
Storage
Low Temperature
Storage
1000 Hrs.
1000 Hrs.
Temp. : 100℃
Temp. : -40℃
5
6
7
22 PCS.
22 PCS.
22 PCS.
0/1
0/1
0/1
DC Operating Life
IF = 20 mA
1000 Hrs.
1000 Hrs.
High Temperature /
High Humidity
85℃/ 85%RH
Everlight Electronics Co., Ltd.
Device No: SZDSE-191-Y21
http://www.everlight.com
Prepared date: 27-Oct-2007
Rev.1
Page: 8 of 10
Prepared by:Zhouhua
EVERLIGHT ELECTRONICS CO.,LTD.
19-21/Y2C-CP1Q2B/3T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
Device No: SZDSE-191-Y21
http://www.everlight.com
Prepared date: 27-Oct-2007
Rev.1
Page: 9 of 10
Prepared by:Zhouhua
EVERLIGHT ELECTRONICS CO.,LTD.
19-21/Y2C-CP1Q2B/3T
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No: SZDSE-191-Y21
http://www.everlight.com
Prepared date: 27-Oct-2007
Rev.1
Page: 10 of 10
Prepared by:Zhouhua
相关型号：
Y2EDV2F105A150P
AVX Multilayer Ceramic Transient Voltage Suppressors TVS Protection and EMI Attenuation in a Single Chip
KYOCERA AVX
©2020 ICPDF网 联系我们和版权申明