CLC2005ISO8X [EXAR]
Low Cost, 2.7V to 5.5V, 260MHz Rail-to-Rail Amplifiers;![CLC2005ISO8X](http://pdffile.icpdf.com/pdf2/p00328/img/icpdf/CLC2005IMP8E_2019593_icpdf.jpg)
型号: | CLC2005ISO8X |
厂家: | ![]() |
描述: | Low Cost, 2.7V to 5.5V, 260MHz Rail-to-Rail Amplifiers 放大器 商用集成电路 |
文件: | 总19页 (文件大小:2623K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CLC1005, CLC1015, CLC2005
Low Cost, +2.7V to 5.5V, 260MHz
Rail-to-Rail Amplifiers
FEATURES
ꢀ■
General Description
260MHz bandwidth
ꢀ■
Fully specified at +2.7V and +5V supplies
Output voltage range:
The CLC1005 (single), CLC1015 (single with disable), and CLC2005 (dual)
are low cost, voltage feedback amplifiers. These amplifiers are designed
to operate on +2.7V to +5V, or 2.5V supplies. The input voltage range
extends 300mV below the negative rail and 1.2V below the positive rail.
ꢀ■
ꢀ■
❏■
0.036V to 4.953V; VS = +5; RL = 2kΩ
Input voltage range:
❏■
-0.3V to +3.8V; VS = +5
TheCLC1005,CLC1015,andCLC2005offer superiordynamicperformance
with 260MHz small signal bandwidth and 145V/μs slew rate.The amplifiers
consume only 4.2mA of supply current per channel and the CLC1015 offers
a disable supply current of only 127μA.The combination of low power, high
output current drive, and rail-to-rail performance make these amplifiers well
suited for battery-powered communication/computing systems.
ꢀ■
ꢀ■
ꢀ■
ꢀ■
ꢀ■
ꢀ■
145V/μs slew rate
4.2mA supply current
Power down to 127μA
55mA linear output current
85mA short circuit current
CLC2005 directly replaces AD8052/42/92
in single supply applications
CLC1005 directly replaces AD8051/41/91
in single supply applications
The combination of low cost and high performance make the CLC1005,
CLC1015, and CLC2005 suitable for high volume applications in both
consumer and industrial applications such as interactive whiteboards,
wireless phones, scanners, color copiers, and video transmission.
ꢀ■
APPLICATIONS
ꢀ■
A/D driver
ꢀ■
Active filters
ꢀ■
CCD imaging systems
ꢀ■
CD/DVD ROM
ꢀ■
Coaxial cable drivers
ꢀ■
High capacitive load driver
ꢀ■
Portable/battery-powered applications
ꢀ■
Twisted pair driver
ꢀ■
Telecom and optical terminals
ꢀ■
Video driver
ꢀ■
Interactive whiteboards
Ordering Information - backpage
2nd & 3rd Harmonic Distortion;V = +2.7V
S
Output Swing
-20
2.7
V
= 1V
pp
o
R = 1kΩ
f
-30
-40
-50
-60
-70
-80
-90
3rd
= 150Ω
R
L
2nd
= 150Ω
R
L
2nd
= 2kΩ
R
L
3rd
L
V = +2.7V
R
= 2kΩ
s
R
= 2kΩ
L
G = -1
0
5
10
15
20
0
Frequency (MHz)
Time (0.5μs/div)
© 2007-2015 Exar Corporation
1 / 19
exar.com/CLC1005
Rev 2D
CLC1005, CLC1015, CLC2005
Absolute Maximum Ratings
Operating Conditions
Supply Voltage Range ...................................................2.5 to 5.5V
Operating Temperature Range .................................-40°C to 85°C
Junction Temperature ...........................................................150°C
Storage Temperature Range...................................-65°C to 150°C
Lead Temperature (Soldering, 10s) ......................................260°C
Stresses beyond the limits listed below may cause
permanent damage to the device. Exposure to any Absolute
Maximum Rating condition for extended periods may affect
device reliability and lifetime.
VS ...................................................................................0V to +6V
VIN ............................................................ -VS - 0.5V to +VS +0.5V
Package Thermal Resistance
θ
θ
θ
θ
JA (SOIC-8).....................................................................150°C/W
JA (MSOP-8) .................................................................. 200°C/W
JA (TSOT23-5) ................................................................215°C/W
JA (TSOT23-6) ................................................................192°C/W
Package thermal resistance (θJA), JEDEC standard, multi-layer
test boards, still air.
ESD Protection
SOIC-8 (HBM) .......................................................................2.5kV
ESD Rating for HBM (Human Body Model) and CDM (Charged
Device Model).
© 2007-2015 Exar Corporation
2 / 19
exar.com/CLC1005
Rev 2D
CLC1005, CLC1015, CLC2005
Electrical Characteristics at +2.7V
T = 25°C, V = +2.7V, R = 2kΩ, R = 2kΩ to V /2; G = 2; unless otherwise noted.
A
S
f
L
S
Symbol
Parameter
Conditions
Min
Typ
Max
Units
Frequency Domain Response
GBWP
UGBW
-3dB Gain Bandwidth Product
Unity Gain Bandwidth(1)
-3dB Bandwidth
86
215
85
MHz
MHz
MHz
MHz
G = +1, V
= 0.05V
pp
OUT
OUT
OUT
BW
BW
G = +2, V
G = +2, V
= 0.2V
pp
SS
LS
Large Signal Bandwidth
= 2V
36
pp
Time Domain
t , t
Rise and Fall Time (1)
Settling Time to 0.1%
Overshoot
V
V
V
= 0.2V step; (10% to 90%)
= 1V step
3.7
40
9
ns
ns
R
S
F
OUT
OUT
OUT
t
OS
SR
= 0.2V step
%
Slew Rate
G = -1, 2.7V step
130
V/μs
Distortion/Noise Response
HD2
HD3
THD
2nd Harmonic Distortion (1)
5MHz, V
5MHz, V
5MHz, V
>1MHz
= 1V
= 1V
= 1V
79
82
77
16
1.3
65
dBc
dBc
OUT
OUT
OUT
pp
pp
pp
3rd Harmonic Distortion (1)
Total Harmonic Distortion (1)
Input Voltage Noise
Input Current Noise
Crosstalk(1)
dB
e
nV/√Hz
pA/√Hz
dB
n
i
n
>1MHz
X
CLC2005, 10MHz
TALK
DC Performance
V
Input Offset Voltage
Average Drift
-1.6
10
3
mV
μV/°C
μA
IO
d
VIO
I
Input Bias Current
Average Drift
B
dI
7
nA/°C
μA
B
I
Input Offset Current
Power Supply Rejection Ratio
Open Loop Gain
Supply Current
0.1
57
75
3.9
OS
PSRR
DC
52
dB
A
dB
OL
I
mA
S
Disable Characteristics (CLC1015)
T
T
Turn On Time
150
25
ns
ns
ON
Turn Off Time
OFF
OFF
Off Isolation
5MHz, R = 100Ω
75
dB
μA
ISO
L
I
Disable Supply Current
DIS tied to GND
58
100
SD
Input Characteristics
R
C
Input Resistance
4.3
1.8
MΩ
pF
V
IN
IN
Input Capacitance
CMIR
Common Mode Input Range
Common Mode Rejection Ratio
-0.3 to 1.5
87
CMRR
DC, V
= 0 to V - 1.5V
dB
CM
S
Output Characteristics
0.023 to
2.66
0.025 to
2.653
0.065 to
2.55
R = 10kΩ to V / 2
V
V
V
L
S
V
Output Swing
R = 2kΩ to V / 2
OUT
L
S
R = 150Ω to V / 2
L
S
55
mA
mA
mA
V
I
I
Output Current
OUT
SC
-40°C to +85°C
= V / 2
50
Short Circuit Current
V
85
OUT
S
V
Power Supply Operating Range
2.5
2.7
5.5
S
Notes:
1. Rf = 1kΩ was used for optimal performance. (For G = +1, Rf = 0)
© 2007-2015 Exar Corporation
3 / 19
exar.com/CLC1005
Rev 2D
CLC1005, CLC1015, CLC2005
Electrical Characteristics at +5V
T = 25°C, V = +5V, R = 2kΩ, R = 2kΩ to V /2; G = 2; unless otherwise noted.
A
S
f
L
S
Symbol
Parameter
Conditions
Min
Typ
Max
Units
Frequency Domain Response
GBWP
UGBW
-3dB Gain Bandwidth Product
Unity Gain Bandwidth(1)
-3dB Bandwidth
90
260
90
MHz
MHz
MHz
MHz
G = +1, V
G = +2, V
G = +2, V
= 0.05V
pp
OUT
OUT
OUT
BW
BW
= 0.2V
pp
SS
LS
Large Signal Bandwidth
= 2V
40
pp
Time Domain
t , t
Rise and Fall Time (1)
Settling Time to 0.1%
Overshoot
V
V
V
= 0.2V step
= 2V step
3.6
40
7
ns
ns
R
S
F
OUT
OUT
OUT
t
OS
SR
= 0.2V step
%
Slew Rate
G = -1, 5V step
145
V/μs
Distortion/Noise Response
HD2
HD3
THD
2nd Harmonic Distortion (1)
3rd Harmonic Distortion (1)
Total Harmonic Distortion (1)
5MHz, V
5MHz, V
5MHz, V
= 2V
71
78
dBc
dBc
dB
OUT
OUT
OUT
pp
= 2V
= 2V
pp
pp
70
NTSC (3.85MHz), AC-Coupled, R = 150Ω
0.06
0.08
0.07
0.06
16
%
L
DG
DP
Differential Gain
NTSC (3.85MHz), DC-Coupled, R = 150Ω
%
L
NTSC (3.85MHz), AC-Coupled, R = 150Ω
°
L
Differential Phase
NTSC (3.85MHz), DC-Coupled, R = 150Ω
°
L
e
Input Voltage Noise
Input Current Noise
Crosstalk(1)
>1MHz
nV/√Hz
pA/√Hz
dB
n
i
n
>1MHz
1.3
X
CLC2005, 10MHz
62
TALK
DC Performance
V
Input Offset Voltage
Average Drift
-8
-8
1.4
10
3
8
8
mV
μV/°C
μA
IO
d
VIO
I
Input Bias Current
Average Drift
B
dI
7
nA/°C
μA
B
I
Input Offset Current
Power Supply Rejection Ratio
Open Loop Gain
Supply Current
-0.8
52
0.1
57
78
4.2
0.8
OS
PSRR
DC
dB
A
68
dB
OL
I
5.2
mA
S
Disable Characteristics (CLC1015)
T
T
Turn On Time
150
25
ns
ns
ON
Turn Off Time
OFF
OFF
Off Isolation
5MHz, R = 100Ω
75
dB
μA
ISO
L
I
Disable Supply Current
DIS tied to GND
127
170
SD
Input Characteristics
R
Input Resistance
Input Capacitance
4.3
1.8
MΩ
pF
IN
IN
C
-0.3 to
3.8
CMIR
Common Mode Input Range
V
CMRR
Common Mode Rejection Ratio
DC, V
= 0 to V - 1.5V
72
87
dB
CM
S
© 2007-2015 Exar Corporation
4 / 19
exar.com/CLC1005
Rev 2D
CLC1005, CLC1015, CLC2005
Electrical Characteristics at +5V Continued
T = 25°C, V = +5V, R = 2kΩ, R = 2kΩ to V /2; G = 2; unless otherwise noted.
A
S
f
L
S
Symbol
Parameter
Conditions
Min
Typ
Max
Units
Output Characteristics
0.027 to
4.97
R = 10kΩ to V / 2
V
V
V
L
S
0.036 to
4.953
V
Output Swing
R = 2kΩ to V / 2
L S
OUT
0.12 to
4.8
R = 150Ω to V / 2
0.3
2.5
4.625
5.5
L
S
55
50
85
5
mA
mA
mA
V
I
I
Output Current
OUT
SC
-40°C to +85°C
V = V / 2
OUT
Short Circuit Current
S
V
Power Supply Operating Range
S
Notes:
1. Rf = 1kΩ was used for optimal performance. (For G = +1, Rf = 0)
© 2007-2015 Exar Corporation
5 / 19
exar.com/CLC1005
Rev 2D
CLC1005, CLC1015, CLC2005
CLC1005 Pin Configurations
CLC1005 Pin Assignments
TSOT-5
TSOT-5
Pin No.
Pin Name
OUT
Description
Output
1
2
3
4
5
1
2
3
5
4
OUT
-Vs
+Vs
-IN
-V
S
Negative supply
Positive input
Negative input
Positive supply
+
-
+IN
-IN
+IN
+V
S
SOIC-8
SOIC-8
Pin No.
Pin Name
Description
No Connect
Negative input
Positive input
Negative supply
No Connect
Output
1
2
3
4
5
6
7
8
NC
-IN
NC
-IN
1
2
3
4
8
7
6
5
NC
+IN
+Vs
OUT
NC
-
-V
S
+
+IN
-Vs
NC
OUT
+V
Positive supply
No Connect
S
NC
CLC1015 Pin Configurations
CLC1015 Pin Assignments
TSOT-6
TSOT-6
Pin No.
Pin Name
OUT
Description
Output
1
2
3
4
1
2
3
6
5
4
OUT
-Vs
+Vs
DIS
-IN
-V
S
Negative supply
Positive input
Negative input
+
-
+IN
-IN
+IN
Disable pin. Enabled if pin is left open or tied
5
6
DIS
to +V , disabled if pin is tied to -V (which is
S S
GND in a single supply application.)
Positive supply
+V
S
© 2007-2015 Exar Corporation
6 / 19
exar.com/CLC1005
Rev 2D
CLC1005, CLC1015, CLC2005
CLC2005 Pin Configuration
CLC2005 Pin Assignments
SOIC-8 / MSOP-8
SOIC-8 / MSOP-8
Pin No.
Pin Name
Description
1
2
3
4
5
6
7
8
OUT1
-IN1
Output, channel 1
OUT1
-IN1
+IN1
-Vs
1
2
3
4
8
7
6
5
+Vs
Negative input, channel 1
Positive input, channel 1
Negative supply
+IN1
OUT2
-IN2
-
-V
S
+
-
+IN2
-IN2
Positive input, channel 2
Negative input, channel 2
Output, channel 2
+
+IN2
OUT2
+V
Positive supply
S
© 2007-2015 Exar Corporation
7 / 19
exar.com/CLC1005
Rev 2D
CLC1005, CLC1015, CLC2005
Typical Performance Characteristics
T = 25°C, V = +5V, R = 2kΩ to V /2, G = +2, R = 2kΩ; unless otherwise noted.
A
S
L
S
F
Non-Inverting Frequency Response V = +5V
Inverting Frequency Response V = +5V
S
S
G = -1
G = 1
f
R = 2kΩ
f
R = 0
G = 2
R = 1kΩ
f
G = -10
f
R = 2kΩ
G = 10
f
R = 2kΩ
G = -5
R = 2kΩ
f
G = 5
R = 2kΩ
f
G = -2
R = 2kΩ
f
0.1
1
0.1
1
10
100
10
100
Frequency (MHz)
Frequency (MHz)
Non-Inverting Frequency Response V = +2.7V
Inverting Frequency Response V = +2.7V
S
S
G = -1
G = 1
f
R = 2kΩ
f
R = 0
G = 2
R = 1kΩ
f
G = -10
R = 2kΩ
f
G = 10
f
R = 2kΩ
G = -5
R = 2kΩ
f
G = 5
G = -2
R = 2kΩ
f
R = 2kΩ
f
0.1
1
10
100
0.1
1
10
100
Frequency (MHz)
Frequency (MHz)
Frequency Response vs C
Large Signal Frequency Response
L
C
= 100pF
L
R
= 25Ω
s
V
V
= 1V
o
pp
C
R
= 50pF
L
= 33Ω
= 2V
s
o
pp
C
R
= 20pF
L
+
= 20Ω
Rs
s
-
CL RL
1kW
C
= 10pF
L
R
= 0Ω
1kW
s
0.1
1
10
100
0.1
1
10
100
Frequency (MHz)
Frequency (MHz)
© 2007-2015 Exar Corporation
8 / 19
exar.com/CLC1005
Rev 2D
CLC1005, CLC1015, CLC2005
Typical Performance Characteristics
T = 25°C, V = +5V, R = 2kΩ to V /2, G = +2, R = 2kΩ; unless otherwise noted.
A
S
L
S
F
Frequency Response vs.Temperature
Input Voltage Noise vs Frequency
100
90
80
70
60
50
40
30
20
10
0
1
10
100
1k
10k
100k
1M
Frequency (MHz)
Frequency (Hz)
2nd & 3rd Harmonic Distortion V = +5V
2nd & 3rd Harmonic Distortion V = +2.7V
S
S
-20
-20
V
= 2V
V = 1V
o pp
o
pp
R = 1kΩ
3rd
R = 1kΩ
f
f
-30
-40
-50
-60
-70
-80
-90
-30
-40
-50
-60
-70
-80
-90
R
= 150Ω
L
2nd
3rd
= 150Ω
R
= 150Ω
R
L
L
2nd
= 150Ω
R
L
2nd
= 2kΩ
2nd
R = 2kΩ
L
R
L
3rd
R
3rd
L
= 2kΩ
R
= 2kΩ
L
0
5
0
5
10
15
20
10
15
20
Frequency (MHz)
Frequency (MHz)
2nd Harmonic Distortion vs V
3rd Harmonic Distortion vs V
O
O
-20
-20
R = 1kΩ
f
R = 1kΩ
f
-30
-40
-50
-60
-70
-80
-90
-30
-40
-50
-60
-70
-80
-90
20MHz
10MHz
20MHz
10MHz
5MHz
2MHz
5MHz
2MHz
0.5
1.0
1.5
2.0
2.5
0.5
1.0
1.5
2.0
2.5
Output Amplitude (V
)
Output Amplitude (V )
pp
pp
© 2007-2015 Exar Corporation
9 / 19
exar.com/CLC1005
Rev 2D
CLC1005, CLC1015, CLC2005
Typical Performance Characteristics
T = 25°C, V = +5V, R = 2kΩ to V /2, G = +2, R = 2kΩ; unless otherwise noted.
A
S
L
S
F
PSRR
CMRR
0
-10
-20
-30
-40
-50
-60
-70
-40
-50
-60
-70
-80
-90
0.01
0.1
1.0
10
100
1k
0.01
0.1
1
100
10
Frequency (MHz)
Frequency (MHz)
Open Loop Gain & Phase vs. Frequency
Output Current
0.8
0.6
0.4
0.2
0
80
70
60
50
40
30
20
10
0
|Gain|
Linear output current 55mA
Short circuit current 85mA
0
-0.2
-0.4
Phase
-45
-90
-0.6
-10
-20
-135
-180
-0.8
0.01
0.1
1
10
100
-100
-50
0
50
100
Frequency (MHz)
Output Current (mA)
Small Signal Pulse Response V = +5V
Small Signal Pulse Response V = +2.7V
S
S
R = 1kΩ
f
R = 1kΩ
f
Time (20ns/div)
Time (20ns/div)
© 2007-2015 Exar Corporation
10 / 19
exar.com/CLC1005
Rev 2D
CLC1005, CLC1015, CLC2005
Typical Performance Characteristics
T = 25°C, V = +5V, R = 2kΩ to V /2, G = +2, R = 2kΩ; unless otherwise noted.
A
S
L
S
F
Large Signal Pulse Response V = +5V
Output Swing
S
2.7
R = 1kΩ
f
V = +2.7V
s
R
= 2kΩ
L
G = -1
0
Time (20ns/div)
Time (0.5μs/div)
Channel Matching V = +5V
S
R = 1kΩ
f
R
= 2kΩ
Channel 1
L
G = 2
Channel 2
0.1
1
10
100
Frequency (MHz)
© 2007-2015 Exar Corporation
11 / 19
exar.com/CLC1005
Rev 2D
CLC1005, CLC1015, CLC2005
Application Information
+Vs
6.8μF
General Description
The CLC1005, CLC1015, and CLC2005 are single supply,
general purpose, voltage-feedback amplifiers fabricated
on a complementary bipolar process using a patented
topography. They feature a rail-to-rail output stage and are
unity gain stable. Both gain bandwidth and slew rate are
insensitive to temperature.
0.1μF
+
Input
Output
-
RL
0.1μF
The common mode input range extends to 300mV below
ground and to 1.2V below V . Exceeding these values will
s
6.8μF
G = 1
not cause phase reversal. However, if the input voltage
exceeds the rails by more than 0.5V, the input ESD devices
will begin to conduct. The output will stay at the rail during
this overdrive condition.
-Vs
Figure 3: Unity Gain Circuit
+Vs
The design is short circuit protected and offers “soft”
saturation protection that improves recovery time.
6.8μF
+
Figures 1, 2, and 3 illustrate typical circuit configurations for
non-inverting, inverting, and unity gain topologies for dual
supply applications. They show the recommended bypass
capacitor values and overall closed loop gain equations. Figure
4 shows the typical non-inverting gain circuit for single supply
applications.
0.1μF
In
+
Out
-
Rf
+Vs
Rg
6.8μF
Figure 4: Single Supply Non-Inverting Gain Circuit
0.1μF
Input
+
-
Output
At non-inverting gains other than G = +1, keep R below 1kΩ
g
to minimize peaking; thus for optimum response at a gain of
+2, a feedback resistor of 1kΩ is recommended. Figure 5
illustrates the CLC1005, CLC1015 and CLC2005 frequency
response with both 1kΩ and 2kΩ feedback resistors.
RL
0.1μF
6.8μF
Rf
Rg
G = 1 + (Rf/Rg)
-Vs
G = 2
Figure 1: Typical Non-Inverting Gain Circuit
R
V
= 2kΩ
= +5V
L
R = 2kΩ
f
s
+Vs
6.8μF
R = 1kΩ
f
R1
0.1μF
+
Output
Rg
Input
-
RL
0.1μF
Rf
1
10
100
Frequency (MHz)
6.8μF
G = - (Rf/Rg)
-Vs
Figure 5: Frequency Response vs. R
f
For optimum input offset
voltage set R1 = Rf || Rg
Figure 2: Typical Inverting Gain Circuit
© 2007-2015 Exar Corporation
12 / 19
exar.com/CLC1005
Rev 2D
CLC1005, CLC1015, CLC2005
needs to be subtracted from the total power delivered by the
supplies.
Overdrive Recovery
For an amplifier, an overdrive condition occurs when the
output and/or input ranges are exceeded. The recovery time
varies based on whether the input or output is overdriven
and by how much the ranges are exceeded. The CLC1005,
CLC1015, and CLC2005 will typically recover in less than
20ns from an overdrive condition. Figure 6 shows the
CLC2005 in an overdriven condition.
P = P
- P
load
D
supply
Supply power is calculated by the standard power equation.
P
supply
= V
× I
supply RMSsupply
V
= V - V
S+ S-
supply
Power delivered to a purely resistive load is:
R
V
= 2kΩ
2
L
P
load
= ((V
)
)/Rload
eff
load RMS
Input
=2V
in
pp
G = 5
f
The effective load resistor (Rload ) will need to include the
effect of the feedback network. For instance,
eff
R = 1kΩ
Output
Rload in Figure 3 would be calculated as:
eff
R || (R + R )
L
f
g
These measurements are basic and are relatively easy to
perform with standard lab equipment. For design purposes
however, prior knowledge of actual signal levels and load
impedance is needed to determine the dissipated power.
Here, P can be found from
D
Time (20ns/div)
Figure 6: Overdrive Recovery
P = P
+ P
- P
D
Quiescent
Dynamic load
Quiescent power can be derived from the specified I values
S
along with known supply voltage, V
be calculated as above with the desired signal amplitudes
using:
. Load power can
supply
Enable/Disable Function
The CLC1015 offers an active-low disable pin that can be
used to lower its supply current. Leave the pin floating to
enable to part. Pull the disable pin to the negative supply
(which is ground in a single supply application) to disable
the output. During the disable condition, the nominal supply
current will drop below 127μA and the output will be at a
high impedance with about 2pF capacitance.
(V
)
= V
/ √2
load RMS
peak
( I
)
= ( V
)
/ Rload
eff
load RMS
load RMS
The dynamic power is focused primarily within the output
stage driving the load. This value can be calculated as:
Power Dissipation
P
= (V - V
)
× ( I )
load RMS
Dynamic
S+
load RMS
Power dissipation should not be a factor when operating
under the stated 2kΩ load condition. However, applications
with low impedance, DC coupled loads should be analyzed
to ensure that maximum allowed junction temperature is
not exceeded. Guidelines listed below can be used to verify
that the particular application will not cause the device to
operate beyond it’s intended operating range.
Assuming the load is referenced in the middle of the power
rails or V /2.
supply
The CLC1015 is short circuit protected. However, this may
not guarantee that the maximum junction temperature
(+150°C) is not exceeded under all conditions. Figure 7
shows the maximum safe power dissipation in the package
vs. the ambient temperature for the packages available.
Maximum power levels are set by the absolute maximum
junction rating of 150°C. To calculate the junction
temperature, the package thermal resistance value Theta
JA
(θ ) is used along with the total die power dissipation.
JA
T
= T
+ (θ × P )
Ambient JA D
Junction
Where T
is the temperature of the working
Ambient
environment.
In order to determine P , the power dissipated in the load
D
© 2007-2015 Exar Corporation
13 / 19
exar.com/CLC1005
Rev 2D
CLC1005, CLC1015, CLC2005
Layout Considerations
1.5
General layout and supply bypassing play major roles in
high frequency performance. Exar has evaluation boards to
use as a guide for high frequency layout and as an aid in
device testing and characterization. Follow the steps below
as a basis for high frequency layout:
SOIC-8
1
TSOT-6
ꢀ■
Include 6.8µF and 0.1µF ceramic capacitors for power supply
MSOP-8
decoupling
0.5
TSOT-5
ꢀ■
Place the 6.8µF capacitor within 0.75 inches of the power pin
ꢀ■
Place the 0.1µF capacitor within 0.1 inches of the power pin
ꢀ■
Remove the ground plane under and around the part,
0
especially near the input and output pins to reduce parasitic
capacitance
-40
-20
0
20
40
60
80
Ambient Temperature (°C)
ꢀ■
Minimize all trace lengths to reduce series inductances
Figure 7. Maximum Power Derating
Refer to the evaluation board layouts below for more
information.
Driving Capacitive Loads
Evaluation Board Information
Increased phase delay at the output due to capacitive loading
can cause ringing, peaking in the frequency response, and
The following evaluation boards are available to aid in the
testing and layout of these devices:
possible unstable behavior. Use a series resistance, R ,
S
between the amplifier and the load to help improve stability
and settling performance. Refer to Figure 8.
Evaluation Board #
CEB002
Products
CLC1005 and CLC1015 in TSOT
CLC1005 in SOIC
Input
+
-
Rs
CEB003
Output
CEB006
CLC2005 in SOIC
CL
RL
Rf
CEB010
CLC2005 in MSOP
Rg
Evaluation Board Schematics
Figure 8. Addition of R for Driving Capacitive Loads
S
Evaluation board schematics and layouts are shown in
Figures 9-18. These evaluation boards are built for dual-
supply operation. Follow these steps to use the board in a
single-supply application:
Table 1 provides the recommended R for various capacitive
S
loads. The recommended R values result in approximately
S
<1dB peaking in the frequency response.
1. Short -VS to ground.
2. Use C3 and C4, if the -VS pin of the amplifier is not
directly connected to the ground plane.
CL (pF)
RS (Ω)
-3dB BW (MHz)
22pF
47pF
0
118
112
91
15
15
6.5
100pF
492pF
59
Table 1: Recommended R vs. C
S
L
For a given load capacitance, adjust R to optimize the
S
tradeoff between settling time and bandwidth. In general,
reducing R will increase bandwidth at the expense of
S
additional overshoot and ringing.
© 2007-2015 Exar Corporation
14 / 19
exar.com/CLC1005
Rev 2D
CLC1005, CLC1015, CLC2005
Figure 11. CEB002 Bottom View
Figure 9. CEB002 and CEB003 Schematic
Figure 12. CEB003 Top View
Figure 10. CEB002 Top View
Figure 13. CEB003 Bottom View
© 2007-2015 Exar Corporation
15 / 19
exar.com/CLC1005
Rev 2D
CLC1005, CLC1015, CLC2005
Figure 16. CEB006 Bottom View
Figure 14. CEB006 & CEB010 Schematic
Figure 17. CEB010 Top View
Figure 15. CEB006 Top View
Figure 18. CEB010 Bottom View
© 2007-2015 Exar Corporation
16 / 19
exar.com/CLC1005
Rev 2D
CLC1005, CLC1015, CLC2005
Mechanical Dimensions
TSOT-6 Package
TSOT-5 Package
© 2007-2015 Exar Corporation
17 / 19
exar.com/CLC1005
Rev 2D
CLC1005, CLC1015, CLC2005
MSOP-8 Package
SOIC-8 Package
© 2007-2015 Exar Corporation
18 / 19
exar.com/CLC1005
Rev 2D
CLC1005, CLC1015, CLC2005
Ordering Information
Part Number
Package
Green
Operating Temperature Range
Packaging
CLC1005 Ordering Information
CLC1005IST5X
TSOT-5
TSOT-5
Yes
Yes
N/A
Yes
Yes
N/A
-40°C to +85°C
-40°C to +85°C
N/A
Tape & Reel
Mini Tape & Reel
N/A
CLC1005IST5MTR
CLC1005IST5EVB
CLC1005ISO8X
Evaluation Board
SOIC-8
-40°C to +85°C
-40°C to +85°C
N/A
Tape & Reel
Mini Tape & Reel
N/A
CLC1005ISO8MTR
CLC1005ISO8EVB
CLC1015 Ordering Information
SOIC-8
Evaluation Board
CLC1015IST6X
TSOT-6
TSOT-6
Yes
Yes
N/A
-40°C to +85°C
-40°C to +85°C
N/A
Tape & Reel
Mini Tape & Reel
N/A
CLC1015IST6MTR
CLC1015IST6EVB
Evaluation Board
CLC2005 Ordering Information
CLC2005ISO8X
SOIC-8
SOIC-8
Yes
Yes
N/A
Yes
Yes
N/A
-40°C to +85°C
-40°C to +85°C
N/A
Tape & Reel
Mini Tape & Reel
N/A
CLC2005ISO8MTR
CLC2005ISO8EVB
CLC2005IMP8X
Evaluation Board
MSOP-8
-40°C to +85°C
-40°C to +85°C
N/A
Tape & Reel
Mini Tape & Reel
N/A
CLC2005IMP8MTR
CLC2005IMP8EVB
MSOP-8
Evaluation Board
Moisture sensitivity level for all parts is MSL-1. Mini tape and reel quantity is 250.
Revision History
Revision
Date
Description
Reformat into Exar data sheet template. Updated ordering information table to include MTR and EVB
part numbers. Updated thermal resistance numbers and package outline drawings. Added CLC1015
back into data sheet.
2D (ECN 1513-01)
March 2015
For Further Assistance:
Email: CustomerSupport@exar.com or HPATechSupport@exar.com
Exar Technical Documentation: http://www.exar.com/techdoc/
Exar Corporation Headquarters and Sales Offices
48760 Kato Road
Fremont, CA 94538 - USA
Tel.: +1 (510) 668-7000
Fax: +1 (510) 668-7001
NOTICE
EXAR Corporation reserves the right to make changes to the products contained in this publication in order to improve design, performance or reliability. EXAR Corporation
assumes no responsibility for the use of any circuits described herein, conveys no license under any patent or other right, and makes no representation that the circuits are free
of patent infringement. Charts and schedules contained here in are only for illustration purposes and may vary depending upon a user’s specific application. While the information
in this publication has been carefully checked; no responsibility, however, is assumed for inaccuracies.
EXAR Corporation does not recommend the use of any of its products in life support applications where the failure or malfunction of the product can reasonably be expected
to cause failure of the life support system or to significantly affect its safety or effectiveness. Products are not authorized for use in such applications unless EXAR Corporation
receives, in writing, assurances to its satisfaction that: (a) the risk of injury or damage has been minimized; (b) the user assumes all such risks; (c) potential liability of EXAR
Corporation is adequately protected under the circumstances.
Reproduction, in part or whole, without the prior written consent of EXAR Corporation is prohibited.
© 2007-2015 Exar Corporation
19 / 19
exar.com/CLC1005
Rev 2D
相关型号:
©2020 ICPDF网 联系我们和版权申明