6N137W [FAIRCHILD]
HIGH SPEED-10 MBit/s LOGIC GATE OPTOCOUPLERS; 高速10 Mbit / s的逻辑门光电耦合器型号: | 6N137W |
厂家: | FAIRCHILD SEMICONDUCTOR |
描述: | HIGH SPEED-10 MBit/s LOGIC GATE OPTOCOUPLERS |
文件: | 总12页 (文件大小:584K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
July 2005
Single-channel: 6N137, HCPL-2601, HCPL-2611
Dual-Channel: HCPL-2630, HCPL-2631
High Speed-10 MBit/s Logic Gate Optocouplers
Features
Description
■ Very high speed-10 MBit/s
■ Superior CMR-10 kV/µs
■ Double working voltage-480V
■ Fan-out of 8 over -40°C to +85°C
■ Logic gate output
■ Strobable output
■ Wired OR-open collector
■ U.L. recognized (File # E90700)
The 6N137, HCPL-2601/2611 single-channel and HCPL-2630/
2631 dual-channel optocouplers consist of a 850 nm AlGaAS
LED, optically coupled to a very high speed integrated photo-
detector logic gate with a strobable output. This output features
an open collector, thereby permitting wired OR outputs. The
coupled parameters are guaranteed over the temperature range
of -40°C to +85°C. A maximum input signal of 5 mA will provide
a minimum output sink current of 13mA (fan out of 8).
An internal noise shield provides superior common mode rejec-
tion of typically 10kV/µs. The HCPL- 2601 and HCPL- 2631 has
a minimum CMR of 5 kV/µs. The HCPL-2611 has a minimum
CMR of 10 kV/µs.
Applications
■ Ground loop elimination
■ LSTTL to TTL, LSTTL or 5-volt CMOS
■ Line receiver, data transmission
■ Data multiplexing
■ Switching power supplies
■ Pulse transformer replacement
■ Computer-peripheral interface
Package
Schematic
VCC
N/C
1
8
VCC
+
1
8
8
VF1
_
VE
+
2
3
7
6
5
V01
2
3
7
6
5
1
VF
_
_
VO
V02
VF2
GND
N/C
4
GND
+
4
8
8
6N137
HCPL-2601
HCPL-2611
HCPL-2630
HCPL-2631
1
1
Truth Table (Positive Logic)
Input
Enable
Output
H
H
L
H
H
H
L
L
H
H
L
L
L
H
L
NC
NC
H
A 0.1µF bypass capacitor must be connected between pins 8 and 5. (See note 1)
©2005 Fairchild Semiconductor Corporation
1
www.fairchildsemi.com
Single-channel: 6N137, HCPL-2601, HCPL-2611 Dual-Channel: HCPL-2630, HCPL-2631 Rev. 1.0.3
Absolute Maximum Ratings (T = 25°C unless otherwise specified)
A
Parameter
Symbol
Value
-55 to +125
-40 to +85
Units
°C
Storage Temperature
Operating Temperature
Lead Solder Temperature
EMITTER
T
STG
T
°C
OPR
T
260 for 10 sec
°C
SOL
DC/Average Forward
Input Current
Single Channel
Dual Channel (Each Channel)
Single Channel
I
50
30
mA
V
F
Enable Input Voltage
V
V
5.5
E
Not to exceed V by more than 500 mV
CC
Reverse Input Voltage
Power Dissipation
Each Channel
Single Channel
5.0
100
45
V
R
P
mW
I
Dual Channel (Each Channel)
DETECTOR
Supply Voltage
V
7.0
V
CC
(1 minute max)
Output Current
Single Channel
Dual Channel (Each Channel)
Each Channel
I
50
50
7.0
85
60
mA
O
Output Voltage
V
P
V
O
Collector Output
Power Dissipation
Single Channel
mW
O
Dual Channel (Each Channel)
Recommended Operating Conditions
Parameter
Symbol
Min
0
Max
Units
Input Current, Low Level
Input Current, High Level
Supply Voltage, Output
Enable Voltage, Low Level
Enable Voltage, High Level
Low Level Supply Current
Fan Out (TTL load)
I
250
15
µA
mA
V
FL
I
*6.3
4.5
0
FH
V
5.5
0.8
CC
V
V
EL
V
2.0
-40
V
V
EH
CC
T
+85
8
°C
A
N
*6.3mA is a guard banded value which allows for at least 20% CTR degradation. Initial input current threshold value is
5.0 mA or less.
2
www.fairchildsemi.com
Single-channel: 6N137, HCPL-2601, HCPL-2611 Dual-Channel: HCPL-2630, HCPL-2631 Rev. 1.0.3
Electrical Characteristics (T = 0 to 70°C Unless otherwise specified)
A
Individual Component Characteristics
Parameter
Test Conditions
Symbol Min Typ** Max Unit
EMITTER
(I = 10mA)
V
1.8
V
F
F
Input Forward Voltage
T = 25°C
1.4
1.75
A
Input Reverse Breakdown Voltage
Input Capacitance
(I = 10µA)
B
5.0
V
pF
R
VR
(V = 0, f = 1 MHz)
C
60
F
IN
Input Diode Temperature Coefficient
DETECTOR
(I = 10mA) ∆V /∆T
-1.4
mV/°C
F
F
A
High Level Supply Current Single Channel
Dual Channel
(V = 5.5 V, I = 0 mA)
I
7
10
10
15
mA
mA
CC
F
CCH
(V = 0.5V)
E
Low Level Supply Current Single Channel
Dual Channel
(V = 5.5 V, I = 10 mA)
I
CCL
9
13
CC
F
(V = 0.5V)
14
21
E
Low Level Enable Current
High Level Enable Current
High Level Enable Voltage
Low Level Enable Voltage
(V = 5.5 V, V = 0.5V)
I
-0.8
-0.6
-1.6
-1.6
mA
mA
V
CC
E
EL
(V = 5.5 V, V = 2.0V)
I
EH
CC
E
(V = 5.5 V, I = 10 mA)
V
EH
2.0
CC
F
(V = 5.5 V, I = 10 mA)(Note 3)
V
EL
0.8
V
CC
F
Switching Characteristics (T = -40°C to +85°C, V = 5 V, I = 7.5 mA Unless otherwise specified)
A
CC
F
AC Characteristics
Test Conditions Symbol Min Typ** Max Unit
Propagation Delay Time
to Output High Level
(Note 4) (T = 25°C)
T
T
20
25
45
45
75
100
75
ns
ns
A
PLH
(R = 350Ω, C = 15 pF) (Fig. 12)
L
L
Propagation Delay Time
to Output Low Level
(Note 5) (T = 25°C)
A
PHL
(R = 350Ω, C = 15 pF) (Fig. 12)
100
35
L
L
Pulse Width Distortion
(R = 350Ω, C = 15 pF) (Fig. 12)
|T
-
PHL
3
ns
ns
L
L
T
|
PLH
Output Rise Time
(10-90%)
(R = 350Ω, C = 15 pF)
t
50
12
20
20
L
L
r
(Note 6) (Fig. 12)
Output Rise Time
(90-10%)
(R = 350Ω, C = 15 pF)
t
ns
L
L
f
(Note 7) (Fig. 12)
Enable Propagation Delay
Time to Output High Level
(I = 7.5 mA, V = 3.5 V)
t
t
ns
F
EH
ELH
EHL
(R = 350Ω, C = 15 pF) (Note 8) (Fig. 13)
L
L
Enable Propagation Delay
Time to Output Low Level
(I = 7.5 mA, V = 3.5 V)
ns
F
EH
(R = 350Ω, C = 15 pF) (Note 9) (Fig. 13)
L
L
Common Mode Transient
Immunity (at Output High
Level)
(T = 25°C) |V | = 50V, (Peak)
|CM |
V/µs
A
CM
H
(I = 0 mA, V (Min.) = 2.0V)
F
OH
6N137, HCPL-2630
(R = 350Ω) (Note 10)
10,000
L
HCPL-2601, HCPL-2631
(Fig. 14)
5000 10,000
10,000 15,000
10,000
HCPL-2611
|V | = 400V
CM
Common Mode Transient
Immunity (at Output Low
Level)
(R = 350Ω) (I = 7.5 mA, V (Max.) = 0.8V
|CM |
V/µs
L
F
OL
L
6N137, HCPL-2630
|V | = 50V (Peak)
CM
HCPL-2601, HCPL-2631 (T = 25°C)(Note 11)(Fig. 14)
5000 10,000
10,000 15,000
A
HCPL-2611(T = 25°C)
|V | = 400V
CM
A
3
www.fairchildsemi.com
Single-channel: 6N137, HCPL-2601, HCPL-2611 Dual-Channel: HCPL-2630, HCPL-2631 Rev. 1.0.3
Transfer Characteristics (T = -40 to +85°C Unless otherwise specified)
A
DC Characteristics
Test Conditions Symbol
Min
Typ**
Max
Unit
High Level Output Current
(V = 5.5 V, V = 5.5 V)
I
OH
100
µA
CC
O
(I = 250 µA, V = 2.0 V) (Note 2)
F
E
Low Level Output Current
Input Threshold Current
(V = 5.5 V, I = 5 mA)
V
.35
3
0.6
5
V
CC
F
OL
FT
(V = 2.0 V, I = 13 mA) (Note 2)
E
CL
(V = 5.5 V, V = 0.6 V,
I
mA
CC
O
V
= 2.0 V, I = 13 mA)
E
OL
Isolation Characteristics (T = -40°C to +85°C Unless otherwise specified.)
A
Characteristics
Test Conditions Symbol
Min
Typ**
Max
Unit
Input-Output
Insulation Leakage
Current
(Relative humidity = 45%)
(T = 25°C, t = 5 s)
I
1.0*
µA
I-O
A
(V = 3000 VDC)
I-O
(Note 12)
Withstand Insulation Test Voltage
(RH < 50%, T = 25°C)
V
2500
V
RMS
A
ISO
(Note 12) ( t = 1 min.)
12
Resistance (Input to Output)
Capacitance (Input to Output)
(V = 500 V) (Note 12)
R
C
10
Ω
I-O
I-O
I-O
(f = 1 MHz) (Note 12)
0.6
pF
** All Typicals at V = 5V, T = 25°C
CC
A
NOTES
1. The V supply to each optoisolator must be bypassed by a 0.1µF capacitor or larger. This can be either a ceramic or solid
CC
tantalum capacitor with good high frequency characteristic and should be connected as close as possible to the package V and
CC
GND pins of each device.
2. Each channel.
3. Enable Input - No pull up resistor required as the device has an internal pull up resistor.
4.
t
-Propagation delay is measured from the 3.75 mA level on the HIGH to LOW transition of the input current pulse to the 1.5 V
PLH
level on the LOW to HIGH transition of the output voltage pulse.
-Propagation delay is measured from the 3.75 mA level on the LOW to HIGH transition of the input current pulse to the 1.5 V
5.
t
PHL
level on the HIGH to LOW transition of the output voltage pulse.
6. t -Rise time is measured from the 90% to the 10% levels on the LOW to HIGH transition of the output pulse.
r
7. t -Fall time is measured from the 10% to the 90% levels on the HIGH to LOW transition of the output pulse.
f
8.
t
-Enable input propagation delay is measured from the 1.5 V level on the HIGH to LOW transition of the input voltage pulse to
ELH
the 1.5 V level on the LOW to HIGH transition of the output voltage pulse.
-Enable input propagation delay is measured from the 1.5 V level on the LOW to HIGH transition of the input voltage pulse to
9.
t
EHL
the 1.5 V level on the HIGH to LOW transition of the output voltage pulse.
10. CM -The maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in the high state (i.e., V
H
OUT
> 2.0 V). Measured in volts per microsecond (V/µs).
11. CM -The maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in the low output state (i.e.,
L
OUT
V
< 0.8 V). Measured in volts per microsecond (V/µs).
12. Device considered a two-terminal device: Pins 1,2,3 and 4 shorted together, and Pins 5,6,7 and 8 shorted together.
4
www.fairchildsemi.com
Single-channel: 6N137, HCPL-2601, HCPL-2611 Dual-Channel: HCPL-2630, HCPL-2631 Rev. 1.0.3
Fig.1 Low Level Output Voltage vs. Ambient Temperature
Fig. 2 Input Diode Forward Voltage
vs. Forward Current
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
Conditions:
30
IF = 5 mA
VE = 2 V
VCC= 5.5V
16
IOL = 16 mA
10
IOL = 12.8 mA
1
0.1
0.01
IOL = 9.6 mA
IOL = 6.4 mA
20
0.001
-40
-20
0
40
60
80
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
T
- Ambient Temperature (°C)
V
- Forward Voltage (V)
A
F
Fig. 4 Low Level Output Current
vs. Ambient Temperature
Fig.3 Switching Time vs. Forward Current
120
100
80
60
40
20
0
50
45
40
35
30
25
20
VCC = 5 V
IF = 15 mA
IF = 10 mA
IF = 5 mA
RL = 4 kΩ (TPLH
)
Conditions:
V
V
V
CC= 5 V
E = 2 V
OL = 0.6 V
RL = 1 kΩ (TPLH
)
RL = 1 kΩ
(TPHL
)
R
R
L = 4 kΩ
RL = 350 Ω (TPLH
)
L = 350 kΩ
5
7
9
11
13
15
-40
-20
0
20
T - Ambient Temperature (°C)
A
40
60
80
I
- Forward Current (mA)
F
Fig. 6 Output Voltage vs. Input Forward Current
Fig. 5 Input Threshold Current
vs. Ambient Temperature
6
5
4
3
2
1
0
4
Conditions:
V
V
CC= 5.0 V
O = 0.6 V
RL = 350
RL = 350Ω
3
2
1
RL =4kΩ
RL = 1kΩ
RL = 1kΩ
RL = 4kΩ
0
1
2
3
4
5
6
-40
-20
0
20
40
60
80
T
A
- Ambient Temperature (°C)
I - Forward Current (mA)
F
5
www.fairchildsemi.com
Single-channel: 6N137, HCPL-2601, HCPL-2611 Dual-Channel: HCPL-2630, HCPL-2631 Rev. 1.0.3
Fig. 7 Pulse Width Distortion vs.Temperature
Fig. 8 Rise and Fall Time vs.Temperature
80
60
40
20
0
600
500
400
300
200
100
0
Conditions:
IF = 7.5 mA
VCC = 5 V
Conditions:
IF = 7.5 mA
VCC = 5 V
RL = 4 kΩ
RL = 4 kΩ (tr)
RL = 1 kΩ (tr)
RL = 350Ω (tr)
RL = 1 kΩ
RL = 350Ω
RL = 1 kΩ
RL = 4 kΩ
RL = 350Ω
(tf)
-60
-40
-20
0
20
40
60
80
100
-60
-40
-20
0
20
40
60
80
100
T
A
- Temperature (°C)
T - Temperature (°C)
A
Fig. 9 Enable Propagation Delay vs.Temperature
Fig. 10 Switching Time vs.Temperature
120
100
80
60
40
20
0
120
100
80
RL = 4 kΩ (TELH)
RL = 4 kΩ TPLH
RL = 1 kΩ TPLH
RL = 1 kΩ (TELH)
RL = 350Ω (TELH)
RL = 350Ω TPLH
60
40
RL = 350Ω
RL = 1 kΩ
RL = 4 kΩ
RL = 350Ω
RL = 1 kΩ
RL = 4 kΩ
(TEHL)
80
TPHL
20
-60
-60
-40
-20
0
20
40
60
100
-40
-20
0
20
40
60
80
100
T
- Temperature (°C)
T
A
- Temperature (°C)
A
Fig. 11 High Level Output Current
vs.Temperature
20
15
10
5
Conditions:
V
V
V
= 5.5 V
= 5.5 V
= 2.0 V
CC
O
E
I
F
= 250 µA
0
-60
-40
-20
0
20
40
60
80
100
T
A
- Temperature (°C)
6
www.fairchildsemi.com
Single-channel: 6N137, HCPL-2601, HCPL-2611 Dual-Channel: HCPL-2630, HCPL-2631 Rev. 1.0.3
Pulse
Generator
tr = 5ns
ZO= 50Ω
+5V
IF = 7.5 mA
IF = 3.75 mA
Input
(IF)
VCC
1
2
3
4
8
7
6
5
tPHL
tPLH
Output
(VO)
.1 µf
bypass
RL
CL
1.5 V
Output
(VO)
Input
Monitor
(IF)
90%
10%
Output
(VO)
GND
47
tf
tr
Fig. 12 Test Circuit and Waveforms for tPLH, tPHL, tr and tf.
Pulse
Input
Monitor
(VE)
Generator
tr = 5ns
ZO= 50Ω
+5V
3.0 V
1.5 V
Input
(VE )
VCC
1
2
3
4
8
7
6
5
tEHL
Output
(VO)
tELH
7.5 mA
RL
.1 µf
bypass
1.5 V
Output
(VO)
CL
GND
Fig. 13 Test Circuit tEHL and tELH
.
7
www.fairchildsemi.com
Single-channel: 6N137, HCPL-2601, HCPL-2611 Dual-Channel: HCPL-2630, HCPL-2631 Rev. 1.0.3
VCC
+5V
1
2
3
4
8
7
6
5
IF
.1 µf
bypass
350Ω
A
B
Output
(VO)
VFF
GND
VCM
Pulse Gen
Peak
VCM
0V
5V
VO
CMH
Switching Pos. (A), IF= 0
VO (Min)
VO (Max)
Switching Pos. (B), IF = 7.5 mA
VO
CML
0.5 V
Fig. 14 Test Circuit Common Mode Transient Immunity
8
www.fairchildsemi.com
Single-channel: 6N137, HCPL-2601, HCPL-2611 Dual-Channel: HCPL-2630, HCPL-2631 Rev. 1.0.3
Package Dimensions (Through Hole)
Package Dimensions (Surface Mount)
0.390 (9.91)
0.370 (9.40)
PIN 1
ID.
PIN 1
ID.
0.270 (6.86)
0.250 (6.35)
0.270 (6.86)
0.250 (6.35)
0.390 (9.91)
0.370 (9.40)
0.300 (7.62)
TYP
0.070 (1.78)
0.045 (1.14)
0.070 (1.78)
0.045 (1.14)
0.020 (0.51)
MIN
0.016 (0.41)
0.008 (0.20)
0.020 (0.51) MIN
0.200 (5.08)
0.140 (3.55)
0.154 (3.90)
0.120 (3.05)
0.045 [1.14]
0.022 (0.56)
0.016 (0.41)
0.022 (0.56)
0.016 (0.41)
15° MAX
0.315 (8.00)
MIN
0.016 (0.40)
0.008 (0.20)
0.100 (2.54)
TYP
0.300 (7.62)
TYP
0.100 (2.54) TYP
0.405 (10.30)
MIN
Lead Coplanarity : 0.004 (0.10) MAX
Package Dimensions (0.4"Lead Spacing)
Recommended Pad Layout for
Surface Mount Leadform
PIN 1
ID.
0.070 (1.78)
0.270 (6.86)
0.250 (6.35)
0.060 (1.52)
0.390 (9.91)
0.370 (9.40)
0.100 (2.54)
0.295 (7.49)
0.415 (10.54)
0.070 (1.78)
0.045 (1.14)
0.030 (0.76)
0.004 (0.10) MIN
0.200 (5.08)
0.140 (3.55)
0.154 (3.90)
0.120 (3.05)
0.022 (0.56)
0.016 (0.41)
0° to 15°
0.016 (0.40)
0.008 (0.20)
0.400 (10.16)
TYP
0.100 (2.54) TYP
NOTE
All dimensions are in inches (millimeters)
9
www.fairchildsemi.com
Single-channel: 6N137, HCPL-2601, HCPL-2611 Dual-Channel: HCPL-2630, HCPL-2631 Rev. 1.0.3
Ordering Information
Option
Example Part Number
6N137S
Description
S
SD
W
Surface Mount Lead Bend
6N137SD
Surface Mount; Tape and reel
0.4" Lead Spacing
6N137W
V
6N137V
VDE0884
TV
SV
SDV
6N137TV
VDE0884; 0.4” lead spacing
VDE0884; surface mount
VDE0884; surface mount; tape and reel
6N137SV
6N137SDV
QT Carrier Tape Specifications (“D”Taping Orientation)
12.0 0.1
4.90 0.20
4.0 0.1
Ø1.55 0.05
1.75 0.10
0.30 0.05
4.0 0.1
7.5 0.1
16.0 0.3
10.30 0.20
13.2 0.2
Ø1.6 0.1
10.30 0.20
0.1 MAX
User Direction of Feed
10
Single-channel: 6N137, HCPL-2601, HCPL-2611 Dual-Channel: HCPL-2630, HCPL-2631 Rev. 1.0.3
www.fairchildsemi.com
Marking Information
1
2
6
2601
V XX YY T1
5
3
4
Definitions
1
2
3
Fairchild logo
Device number
VDE mark (Note: Only appears on parts ordered with VDE option –
See order entry table)
4
5
6
Two digit year code, e.g., ‘03’
Two digit work week ranging from ‘01’ to ‘53’
Assembly package code
Reflow Profile
300
250
200
150
100
50
215C, 10–30 s
225C peak
Time above 183C, 60–150 sec
Ramp up = 3C/sec
0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
Time (Minute)
• Peak reflow temperature: 225C (package surface temperature)
• Time of temperature higher than 183C for 60–150 seconds
• One time soldering reflow is recommended
11
www.fairchildsemi.com
Single-channel: 6N137, HCPL-2601, HCPL-2611 Dual-Channel: HCPL-2630, HCPL-2631 Rev. 1.0.3
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ACEx™
PowerSaver™
SuperSOT™-8
SyncFET™
TinyLogic
ISOPLANAR™
LittleFET™
MICROCOUPLER™
MicroFET™
MicroPak™
MICROWIRE™
MSX™
FAST
ActiveArray™
Bottomless™
Build it Now™
CoolFET™
CROSSVOLT™
DOME™
EcoSPARK™
E2CMOS™
EnSigna™
FACT™
PowerTrench
FASTr™
FPS™
FRFET™
GlobalOptoisolator™
GTO™
QFET
QS™
TINYOPTO™
TruTranslation™
UHC™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
RapidConnect™
µSerDes™
SILENT SWITCHER
SMART START™
SPM™
UltraFET
HiSeC™
I2C™
UniFET™
VCX™
Wire™
MSXPro™
OCX™
i-Lo™
ImpliedDisconnect™
IntelliMAX™
OCXPro™
OPTOLOGIC
OPTOPLANAR™
PACMAN™
POP™
Power247™
PowerEdge™
FACT Quiet Series™
Stealth™
Across the board. Around the world.™
SuperFET™
SuperSOT™-3
SuperSOT™-6
The Power Franchise
Programmable Active Droop™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVESTHE RIGHTTO MAKE CHANGES WITHOUTFURTHER NOTICETOANY
PRODUCTS HEREINTO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOTASSUMEANYLIABILITY
ARISING OUTOFTHEAPPLICATION OR USE OFANYPRODUCTOR CIRCUITDESCRIBED HEREIN; NEITHER DOES IT
CONVEYANYLICENSE UNDER ITS PATENTRIGHTS, NORTHE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUTTHE EXPRESS WRITTENAPPROVALOF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, or (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the
user.
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or
In Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Obsolete
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Rev. I16
12
Single-channel: 6N137, HCPL-2601, HCPL-2611 Dual-Channel: HCPL-2630, HCPL-2631 Rev. 1.0.3
www.fairchildsemi.com
相关型号:
6N138
IRED & PHOTO IC (CURRENT LOOP DRIVER, LOW INPUT CURRENT LINE RECEIVER, COMS LOGIC INTERFACE)
TOSHIBA
©2020 ICPDF网 联系我们和版权申明