74ALVC32MTCX_NL [FAIRCHILD]
Low Voltage Quad 2-Input OR Gate with 3.6V Tolerant Inputs and Outputs; 低电压四2输入或门与承受3.6V电压的输入和输出型号: | 74ALVC32MTCX_NL |
厂家: | FAIRCHILD SEMICONDUCTOR |
描述: | Low Voltage Quad 2-Input OR Gate with 3.6V Tolerant Inputs and Outputs |
文件: | 总5页 (文件大小:93K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
September 2001
Revised February 2005
74ALVC32
Low Voltage Quad 2-Input OR Gate
with 3.6V Tolerant Inputs and Outputs
General Description
The ALVC32 contains four 2-input OR gates. This product
Features
■ 1.65V to 3.6V VCC supply operation
is designed for low voltage (1.65V to 3.6V) VCC applica-
■ 3.6V tolerant inputs and outputs
■ tPD
tions with I/O compatibility up to 3.6V.
The ALVC32 is fabricated with an advanced CMOS tech-
nology to achieve high-speed operation while maintaining
low CMOS power dissipation.
2.8 ns max for 3.0V to 3.6V VCC
3.1 ns max for 2.3V to 2.7V VCC
4.7 ns max for 1.65V to 1.95V VCC
■ Power-off high impedance inputs and outputs
■ Uses patented Quiet Series noise/EMI reduction
circuitry
■ Latchup conforms to JEDEC JED78
■ ESD performance:
Human body model 2000V
Machine model 250V
Ordering Code:
Package
Order Number
Package Description
Number
74ALVC32M
M14A
MTC14
MTC14
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
74ALVC32MTC
74ALVC32MTCX_NL
(Note 1)
Pb-Free 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm
Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Note 1: “_NL” indicates Pb-Free package (per JEDEC J-STD-020B). Device available in Tape and Reel only.
Logic Symbol
Connection Diagram
IEEC/IEC
Pin Descriptions
Pin Names
Description
Inputs
Outputs
An, Bn
On
Quiet Series is a trademark of Fairchild Semiconductor Corporation.
© 2005 Fairchild Semiconductor Corporation
DS500643
www.fairchildsemi.com
Absolute Maximum Ratings(Note 2)
Recommended Operating
Conditions (Note 4)
Supply Voltage (VCC
)
0.5V to 4.6V
0.5V to 4.6V
DC Input Voltage (VI)
Power Supply
Output Voltage (VO) (Note 3)
0.5V to VCC 0.5V
Operating
1.65V to 3.6V
0V to VCC
DC Input Diode Current (IIK
VI 0V
)
Input Voltage (VI)
50 mA
50 mA
50 mA
Output Voltage (VO)
0V to VCC
DC Output Diode Current (IOK
VO 0V
)
Free Air Operating Temperature (TA)
Minimum Input Edge Rate ( t/ V)
VIN 0.8V to 2.0V, VCC 3.0V
40 C to 85 C
DC Output Source/Sink Current
(IOH/IOL
5 ns/V
Note 2: The Absolute Maximum Ratings are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the Absolute Maximum Rat-
ings. The “Recommended Operating Conditions” table will define the condi-
tions for actual device operation.
)
DC VCC or GND Current per
Supply Pin (ICC or GND)
100 mA
Storage Temperature Range (TSTG
)
65 C to 150 C
Note 3: I Absolute Maximum Rating must be observed, limited to 4.6V.
O
Note 4: Floating or unused control inputs must be held HIGH or LOW.
DC Electrical Characteristics
V
CC
Symbol
Parameter
Conditions
Min
Max
Units
(V)
V
V
V
HIGH Level Input Voltage
1.65 - 1.95 0.65 x V
IH
CC
2.3 - 2.7
2.7 - 3.6
1.65 - 1.95
2.3 - 2.7
2.7 - 3.6
1.65 - 3.6
1.65
1.7
2.0
V
LOW Level Input Voltage
HIGH Level Output Voltage
0.35 x V
0.7
IL
CC
V
V
0.8
I
100
A
V
- 0.2
CC
OH
OH
I
4 mA
6 mA
1.2
2.0
1.7
2.2
2.4
2
OH
I
2.3
OH
I
12 mA
2.3
OH
2.7
3.0
I
24 mA
3.0
OH
V
LOW Level Output Voltage
I
100
A
1.65 - 3.6
1.65
0.2
0.45
0.4
OL
OL
I
4 mA
6 mA
OL
I
2.3
OL
V
I
12 mA
2.3
0.7
OL
2.7
0.4
I
24 mA
3.0
0.55
5.0
OL
I
Input Leakage Current
0
V
3.6V
or GND, I
O
3.6
A
A
A
I
I
I
Quiescent Supply Current
V
V
V
0
3.6
10
CC
I
CC
I
Increase in I per Input
V
CC
0.6V
3 - 3.6
750
CC
CC
IH
www.fairchildsemi.com
2
AC Electrical Characteristics
T
40 C to 85 C, R
500
A
L
C
50 pF
C
30 pF
L
L
Symbol
Parameter
Units
V
3.3V 0.3V
V
2.7V
Max
2.9
V
2.5V 0.2V
V
CC
1.8V 0.15V
CC
CC
CC
Min
1.0
Max
Min
Min
Max
Min
1.0
Max
t
, t
Propagation Delay
2.8
1.0
3.1
4.7
ns
PHL PLH
Capacitance
T
25 C
Typical
A
Symbol
Parameter
Conditions
Units
V
CC
3.3
3.3
2.5
1.8
C
Input Capacitance
V
f
0V or V
CC
4
pF
pF
IN
I
C
Power Dissipation Capacitance
10 MHz, C
50 pF
26
24
23
PD
L
TABLE 1. Values for Figure 1
AC Loading and Waveforms
TEST
SWITCH
tPLH, tPHL
Open
FIGURE 1. AC Test Circuit
TABLE 2. Variable Matrix
(Input Characteristics: f 1MHz; tr tf 2ns; Z0 50
)
VCC
Symbol
3.3V 0.3V
1.5V
2.7V
1.5V
1.5V
2.5V 0.2V
VCC/2
1.8V 0.15V
VCC/2
Vmi
Vmo
1.5V
VCC/2
VCC/2
FIGURE 2. Waveform for Inverting and Non-inverting Functions
3
www.fairchildsemi.com
Physical Dimensions inches (millimeters) unless otherwise noted
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
Package Number M14A
www.fairchildsemi.com
4
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package Number MTC14
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be rea-
sonably expected to result in a significant injury to the
user.
2. A critical component in any component of a life support
device or system whose failure to perform can be rea-
sonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
5
www.fairchildsemi.com
相关型号:
©2020 ICPDF网 联系我们和版权申明