FM809TS3X [FAIRCHILD]
3-Pin UC Supervisor Circuits; 3引脚UC监控电路型号: | FM809TS3X |
厂家: | FAIRCHILD SEMICONDUCTOR |
描述: | 3-Pin UC Supervisor Circuits |
文件: | 总9页 (文件大小:461K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
August 2005
FM809/810
3-Pin µC Supervisor Circuits
General Description
The FM809/810 are supervisor circuits that monitor power
supply or other system voltages and issue reset pulse whenever
the voltage being monitored is out of tolerance. Once asserted,
the reset pulse is guaranteed to be valid for a minimum of
140ms (256ms typical). FM809xx offers active low push-pull
type of reset while FM810xx offers active high push-pull type.
Several threshold voltages are offered to accommodate 5.0V,
3.3V, 3.0V and 2.7V system voltages.
■ 140ms power-on RESET delay (minimum)
■ RESET operation guaranteed to 1.0V
■ Supply current only 2µA
■ No external components
■ Operating Range
– -40°C to +105°C (SOT23)
– -40°C to +85°C (SC70)
■ SOT23-3 and SC70-3 packages
The low supply current (typically 2 µA)recommends FM809/810
devices for portable designs or wherever power saving is
primary.
Applications
■ Microcontrollers and Microprocessors
These devices are offered in space saving 3-pin SOT23 and
SC70 packages.
■ Appliances
■ Power-Supply Monitoring
■ Portable Equipment
Features
■ Automotive Systems
■ V voltages of 4.63V, 4.38V, 4.00V, 3.08V, 2.93V and 2.63V
TH
■ RESET (FM809) or RESET (FM810) output
Typical Operating Circuit
VCC
VCC
FM809
µC
RESET
RESET
I/P
GND
GND
Connection Diagram
GND
1
2
3
V
CC
RESET (809) or
RESET (810)
FM809/810
SOT23-3 & SC70-3Packages
©2005 Fairchild Semiconductor Corporation
FM809/810 Rev. G
1
www.fairchildsemi.com
Absolute Maximum Ratings
Voltage on any terminal relative to GND
ESD Rating
V
-0.3V to +6.0V
Human Body Model
>2KV
>200KV
100V/µs
CC
RESET, RESET
-0.3V to (V + 0.3V)
Machine Model
CC
Input Current
20mA
20mA
Rate of Rise of V
CC
Output Current: RESET, RESET
Continuous Power Dissipation (T = +70°C)
A
SOT23-3 (derate 4mW/°C above +70°C)
320mW
-40°C to +105°C
-65°C to +150°C
+300°C
Operating Temperature Range
Storage Temperature Range
Lead Temperature (soldering, 10s)
These are stress ratings only, and functional operation is not implied for these levels or beyond. Exposure to Absolute Maximum
Rating conditions for extended periods may affect device reliability.
Electrical Characteristics SOT23 Package (T = 25°C unless otherwise noted)
A
V
= full range, as noted under conditions. See Note 1.
CC
Typ
Parameter
Symbol
Conditions
Min
1.0
(Note 3) Max Units
Operating Voltage
V
T = 0°C to +70°C
5.5
5.5
10
V
CC
A
T = -40°C to 105°C
1.1
A
Supply Current
I
T = -40°C to 105°C, V < 5.5V
5
2
µA
CC
A
CC
FM809J/L/M
T = -40°C to 105°C, V < 3.6V
6
A
CC
FM809R/S/T
Reset Threshold
V
FM8xxL
FM8xxM
FM8xxJ
FM8xxT
FM8xxS
FM8xxR
T = -40°C to +105°C
4.40
4.18
3.90
2.97
2.79
2.49
4.63
4.38
4.00
3.08
2.93
2.63
30
4.86
4.52
4.18
3.19
3.00
2.70
V
TH
A
T = -40°C to +105°C
A
T = -40°C to +105°C
A
T = -40°C to +105°C
A
T = -40°C to +105°C
A
T = -40°C to +105°C
A
Reset Threshold Tempco
ppm/°C
µs
V
to Reset Delay (Note 2)
V
= V to (V - 100mV)
10
15
560
0.3
CC
CC
TH
TH
Reset Active Timout Period
FM809 Output Low (RESET)
T = -40°C to +105°C
140
256
ms
A
V
V
= V (min), I
= 1.2mA,
= 3.2mA,
V
OL
CC
TH
SINK
FM809R/S/T
V
= V (min), I
0.4
0.3
CC
TH
SINK
FM809J/L/M
V
V
V
V
= < 1.0V, I
= 50µA
SINK
CC
CC
CC
CC
FM809 Output High (RESET)
FM810 Output Low (RESET)
V
> V (max), I
= 500µA (R/S/T)
= 800µA (J/M/L)
0.8V
CC
V
V
OH
TH
SOURCE
SOURCE
> V (max), I
V
- 1.5V
CC
TH
V
= V (max), I
= 1.2mA,
0.3
0.4
OL
TH
SINK
FM810R/S/T
V
= V (max), I
= 3.2mA,
CC
TH
SINK
FM810J/L/M
FM810 Output High (RESET)
V
1.8V < V < V (min), I
= 150µA
0.8V
CC
V
OH
CC
TH
SOURCE
Note 1: Testing in production is 25°C only. V = 5V for FM8xxL/M/J, V = 3.3V for FM8xxT/S and V = 3V for FM8xxR. Limits over temperature are guaranteed by design.
CC
CC
CC
Note 2: RESET output is for FM809. RESET output is for FM810.
Note 3: Typical values are at 25°C.
Note 4: Recommended minimum slew rate for the V rampup is 200mV/sec in the 0 to 2V range for the device to function properly.
CC
2
www.fairchildsemi.com
FM809/810 Rev. G
Absolute Maximum Ratings
Voltage on any terminal relative to GND
ESD Rating
V
-0.3V to +6.0V
CC
Human Body model
Machine model
1.5KV
>200KV
100V/µs
RESET, RESET
-0.3V to (V + 0.3V)
CC
Input Current
20mA
20mA
Rate of Rise of V
CC
Output Current: RESET, RESET
Continuous Power Dissipation (T = +70°C)
A
SC70-3
174mW
-40°C to +85°C
-65°C to +150°C
+300°C
Operating Temperature Range
Storage Temperature Range
Lead Temperature (soldering, 10s)
These are stress ratings only, and functional operation is not implied for these levels or beyond. Exposure to Absolute Maximum
Rating conditions for extended periods may affect device reliability.
Electrical Characteristics SC70 Package (T = 25°C unless otherwise noted)
A
V
= full range, as noted under conditions. See Note 1.
CC
Typ
Parameter
Symbol
Conditions
Min
1.4
(Note 3) Max Units
Operating Voltage
Supply Current
Reset Threshold
V
T = 0°C to +70°C
5.5
5.5
V
µA
V
CC
A
T = -40°C to 85°C
1.6
A
I
T = -40°C to 85°C, V < 5.5V FM809J/L/M
9
15
CC
A
CC
T = -40°C to 85°C, V < 3.6V FM809R/S/T
6
10
A
CC
V
FM8xxL
T = -40°C to +85°C
4.40
4.18
3.90
2.97
2.79
2.49
4.63
4.38
4.00
3.08
2.93
2.63
30
4.86
4.52
4.18
3.19
3.00
2.70
TH
A
FM8xxM
FM8xxJ
FM8xxT
FM8xxS
FM8xxR
T = -40°C to +85°C
A
T = -40°C to +85°C
A
T = -40°C to +85°C
A
T = -40°C to +85°C
A
T = -40°C to +85°C
A
Reset Threshold Tempco
ppm/°C
µs
V
to Reset Delay (Note 2)
V
= V to (V - 100mV)
10
15
560
0.35
0.4
CC
CC
TH
TH
Reset Active Timout Period
FM809 Output Low (RESET)
T = -40°C to +85°C
100
256
ms
A
V
V
V
V
V
V
V
V
= V (min), I
= 1.2mA, FM809R/S/T
= 3.2mA, FM809J/L/M
V
OL
CC
CC
CC
CC
CC
CC
CC
TH
SINK
SINK
= V (min), I
TH
= < 1.0V, I
= 50µA
0.3
SINK
FM809 Output High (RESET)
FM810 Output Low (RESET)
FM810 Output High (RESET)
V
> V (max), I
= 500µA (R/S/T)
= 800µA (J/M/L)
0.8V
CC
V
V
V
OH
TH
SOURCE
SOURCE
> V (max), I
V
- 1.5V
CC
TH
V
= V (max), I
= 1.2mA, FM810R/S/T
= 3.2mA, FM810J/L/M
0.35
0.4
OL
TH
SINK
SINK
= V (max), I
TH
V
1.8V < V < V (min), I
= 150µA
0.8V
CC
OH
CC
TH
SOURCE
Note 1: Testing in production is 25°C only. V = 5V for FM8xxL/M/J, V = 3.3V for FM8xxT/S and V = 3V for FM8xxR. Limits over temperature are guaranteed by design.
CC
CC
CC
Note 2: RESET output is for FM809. RESET output is for FM810.
Note 3: Typical values are at 25°C.
3
www.fairchildsemi.com
FM809/810 Rev. G
Pin Descriptions
Pin Number
Name
GND
Function
1
2
GROUND
RESET*
RESET (RESET) remains LOW (HIGH) while V
is below V
,
TH
CC
and for at least 140ms after V rises above V
.
TH
CC
3
V
CC
* with overbar, FM809 (RESET); without, FM810 (RESET).
Circuit Timing (e.g.: FM809)
INPUT
5V
V
TH
1V
GND
OUTPUT
5V
V
TH
1V
GND
140ms
When operating properly with 5V in (for example), V
will also
When V begins to rise, V
follows it until 1.0V or so is
OUT
IN
OUT
be about 5V. When V starts to fall, V
will follow it down as
reached, whereupon the device regains control, V
is pulled
IN
OUT
OUT
shown. When V drops below V , V
drops to ground
to ground, etc. When V rises above V , V
comes out of
IN
TH
OUT
IN
TH
OUT
("issues a RESET") and stays there unless V also falls below
RESET 140 ms later.
IN
its minimum operating voltage, approx. 1V. At this point, the
supervisor loses control, and its output may rise, only to again
If it is required that a lower value than GND + 1.0V is needed
on RESET signal during V ≤ 1V, a 100K resistor may be used
CC
follow V down to the ground.
IN
on the device output (to GND for the FM809, to V
FM810).
for the
CC
4
www.fairchildsemi.com
FM809/810 Rev. G
Ordering Information (FM809)
RESET
Part Number Top Marking Threshold (V)
Packing
Method
Output Type
Package Type
3-Pin, SOT23
3-Pin, SOT23
3-Pin, SOT23
3-Pin, SOT23
3-Pin, SOT23
3-Pin, SOT23
3-Pin, SC70
3-Pin, SC70
3-Pin, SC70
3-Pin, SC70
3-Pin, SC70
3-Pin, SC70
FM809LS3X
FM809MS3X
FM809JS3X
FM809TS3X
FM809SS3X
FM809RS3X
FM809LP3X
FM809MP3X
FM809JP3X
FM809TP3X
FM809SP3X
FM809RP3X
09L
09M
09J
4.63
4.38
4.00
3.08
2.93
2.63
4.63
4.38
4.00
3.08
2.93
2.63
Push-Pull, active LOW
Push-Pull, active LOW
Push-Pull, active LOW
Push-Pull, active LOW
Push-Pull, active LOW
Push-Pull, active LOW
Push-Pull, active LOW
Push-Pull, active LOW
Push-Pull, active LOW
Push-Pull, active LOW
Push-Pull, active LOW
Push-Pull, active LOW
3000 units in T&R
3000 units in T&R
3000 units in T&R
3000 units in T&R
3000 units in T&R
3000 units in T&R
3000 units in T&R
3000 units in T&R
3000 units in T&R
3000 units in T&R
3000 units in T&R
3000 units in T&R
09T
09S
09R
VLY
VMY
VJY
VTY
VSY
VRY
Note 4: Devices listed above feature 250ms typical Reset Pulse width. Consult Fairchild sales for other reset pulse width options.
Note 5: For the SC70 package, the third character of the top marking, identified as “Y” in the above table, identifies wafer lot code.
5
www.fairchildsemi.com
FM809/810 Rev. G
Ordering Information (FM810)
RESET
Threshold (V)
Packing
Method
Part Number Top Marking
Output Type
Package Type
3-Pin, SOT23
3-Pin, SOT23
3-Pin, SOT23
3-Pin, SOT23
3-Pin, SOT23
3-Pin, SOT23
3-Pin, SC70
3-Pin, SC70
3-Pin, SC70
3-Pin, SC70
3-Pin, SC70
3-Pin, SC70
FM810LS3X
FM810MS3X
FM810JS3X
FM810TS3X
FM810SS3X
FM810RS3X
FM810LP3X
FM810MP3X
FM810JP3X
FM810TP3X
FM810SP3X
FM810RP3X
10L
10M
10J
4.63
4.38
4.00
3.08
2.93
2.63
4.63
4.38
4.00
3.08
2.93
2.63
Push-Pull, active HIGH
Push-Pull, active HIGH
Push-Pull, active HIGH
Push-Pull, active HIGH
Push-Pull, active HIGH
Push-Pull, active HIGH
Push-Pull, active HIGH
Push-Pull, active HIGH
Push-Pull, active HIGH
Push-Pull, active HIGH
Push-Pull, active HIGH
Push-Pull, active HIGH
3000 units in T&R
3000 units in T&R
3000 units in T&R
3000 units in T&R
3000 units in T&R
3000 units in T&R
3000 units in T&R
3000 units in T&R
3000 units in T&R
3000 units in T&R
3000 units in T&R
3000 units in T&R
10T
10S
10R
ZLY
ZMY
ZJY
ZTY
ZSY
ZRY
Note 6: Devices listed above feature 250ms typical Reset Pulse width. Consult Fairchild sales for other reset pulse width options.
Note 7: For the SC70 package, the third character of the top marking, identified as “Y” in the above table, identifies wafer lot code.
6
www.fairchildsemi.com
FM809/810 Rev. G
Physical Dimensions inches (millimeters) unless otherwise noted
0.021
0.015
0.055
0.047
0.098
0.083
0.120
0.105
0.0059
0.0035
0.040
0.031
0-8
0.010
0.005
0.079
0.071
0.004
0.001
PKG
CL
0.76
0.95
LAND PATTERN RECOMMENDATION
SOT-23 Package Dimensions
FS Pkg Code AU
7
www.fairchildsemi.com
FM809/810 Rev. G
Physical Dimensions inches (millimeters) unless otherwise noted
.087 (2.2)
.071 (1.8)
.053 (1.35)
.045 (1.15)
.087 (2.2)
.079 (2.0)
.009 (.23)
.005 (.13)
.043 (1.1)
.032 (.80)
.004 (.10)
.010 (.25)
.004 (.10)
.016 (.40)
.012 (.30)
.026
(.65)
.018 (.45)
.006 (.15)
.052
(1.3)
0.65
0.65
0.5
Land Pattern Recommendation
SC70 Package Dimensions
8
www.fairchildsemi.com
FM809/810 Rev. G
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ACEx™
PowerSaver™
SuperSOT™-8
SyncFET™
TinyLogic
ISOPLANAR™
LittleFET™
MICROCOUPLER™
MicroFET™
MicroPak™
MICROWIRE™
MSX™
FAST
ActiveArray™
Bottomless™
Build it Now™
CoolFET™
CROSSVOLT™
DOME™
EcoSPARK™
E2CMOS™
EnSigna™
FACT™
PowerTrench
FASTr™
FPS™
FRFET™
GlobalOptoisolator™
GTO™
QFET
QS™
TINYOPTO™
TruTranslation™
UHC™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
RapidConnect™
µSerDes™
SILENT SWITCHER
SMART START™
SPM™
UltraFET
HiSeC™
I2C™
UniFET™
VCX™
Wire™
MSXPro™
OCX™
i-Lo™
ImpliedDisconnect™
IntelliMAX™
OCXPro™
OPTOLOGIC
OPTOPLANAR™
PACMAN™
POP™
Power247™
PowerEdge™
FACT Quiet Series™
Stealth™
Across the board. Around the world.™
SuperFET™
SuperSOT™-3
SuperSOT™-6
The Power Franchise
Programmable Active Droop™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVESTHE RIGHTTO MAKE CHANGES WITHOUTFURTHER NOTICETOANY
PRODUCTS HEREINTO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOTASSUMEANYLIABILITY
ARISING OUTOFTHEAPPLICATION OR USE OFANYPRODUCTOR CIRCUITDESCRIBED HEREIN; NEITHER DOES IT
CONVEYANYLICENSE UNDER ITS PATENTRIGHTS, NORTHE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUTTHE EXPRESS WRITTENAPPROVALOF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, or (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the
user.
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or
In Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Obsolete
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Rev. I16
9
www.fairchildsemi.com
FM809/810 Rev. G
相关型号:
©2020 ICPDF网 联系我们和版权申明