J309D70Z [FAIRCHILD]
RF Small Signal Field-Effect Transistor, 1-Element, Ultra High Frequency Band, Silicon, N-Channel, Junction FET, TO-92;型号: | J309D70Z |
厂家: | FAIRCHILD SEMICONDUCTOR |
描述: | RF Small Signal Field-Effect Transistor, 1-Element, Ultra High Frequency Band, Silicon, N-Channel, Junction FET, TO-92 放大器 晶体管 |
文件: | 总13页 (文件大小:561K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Discr ete P OWER & Sign a l
Tech n ologies
MMBFJ309
MMBFJ310
J309
J310
G
D
TO-92
G
S
SOT-23
Mark: 6U / 6T
S
D
N-Channel RF Amplifier
This device is designed for VHF/UHF amplifier, oscillator and mixer
applications. As a common gate amplifier, 16 dB at 100 MHz and
12 dB at 450 MHz can be realized. Sourced from Process 92.
Absolute Maximum Ratings*
TA = 25°C unless otherwise noted
Symbol
Parameter
Value
Units
VDS
Drain-Source Voltage
Gate-Source Voltage
Forward Gate Current
25
- 25
V
V
VGS
IGF
10
mA
Operating and Storage Junction Temperature Range
-55 to +150
C
°
TJ ,Tstg
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
NOTES:
1) These ratings are based on a maximum junction temperature of 150 degrees C.
2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.
Thermal Characteristics
TA = 25°C unless otherwise noted
Symbol
Characteristic
Max
Units
J309 / J310
*MMBFJ309
PD
Total Device Dissipation
350
2.8
225
1.8
mW
mW/ C
°
Derate above 25 C
°
Thermal Resistance, Junction to Case
125
Rθ
C/W
°
JC
Thermal Resistance, Junction to Ambient
357
556
Rθ
C/W
°
JA
*Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06."
ã1997 Fairchild Semiconductor Corporation
N-Channel RF Amplifier
(continued)
Electrical Characteristics
TA = 25°C unless otherwise noted
Symbol
Parameter
Test Conditions
Min Typ Max Units
OFF CHARACTERISTICS
V(BR)GSS
Gate-Source Breakdown Voltage
- 25
V
I = - 1.0 A, VDS = 0
µ
G
IGSS
Gate Reverse Current
VGS = - 15 V, VDS = 0
- 1.0
- 1.0
- 4.0
- 6.5
nA
A
µ
V
V
VGS = - 15 V, VDS = 0, T = 125 C
°
A
VGS(off)
Gate-Source Cutoff Voltage
VDS = 10 V, ID = 1.0 nA
- 1.0
- 2.0
J309
J310
ON CHARACTERISTICS
IDSS
Zero-Gate Voltage Drain Current*
VDS = 10 V, VGS = 0
VDS = 0, IG = 1.0 mA
12
24
30
60
1.0
mA
mA
V
J309
J310
Gate-Source Forward Voltage
VGS(f)
SMALL SIGNAL CHARACTERISTICS
Common-Source Input Conductance VDS = 10, ID = 10 mA, f = 100 MHz
Re(yis)
0.7
0.5
0.25
mmhos
mmhos
mmhos
J309
J310
Common-Source Output
Conductance
VDS = 10, ID = 10 mA, f = 100 MHz
Re(yos)
Common-Gate Power Gain
VDS = 10, ID = 10 mA, f = 100 MHz
VDS = 10, ID = 10 mA, f = 100 MHz
16
12
dB
Gpg
Common-Source Forward
Transconductance
mmhos
Re(yfs)
Common-Gate Input Conductance
VDS = 10, ID = 10 mA, f = 100 MHz
12
mmhos
Re(yig)
gfs
Common-Source Forward
Transconductance
VDS = 10, ID = 10 mA, f = 1.0 kHz
10,000
8000
20,000
18,000
150
J309
J310
mhos
mhos
mhos
µ
µ
µ
Common-Source Output
Conductance
Common-Gate Forward Conductance VDS = 10, ID = 10 mA, f = 1.0 kHz
J309
J310
Common-Gate Output Conductance VDS = 10, ID = 10 mA, f = 1.0 kHz
VDS = 10, ID = 10 mA, f = 1.0 kHz
gos
gfg
13,000
12,000
mhos
mhos
µ
µ
gog
100
150
2.0
4.1
3.0
J309
J310
mhos
mhos
pF
µ
µ
Drain-Gate Capacitance
Source-Gate Capacitance
Noise Figure
VDS = 0, VGS = - 10, f = 1.0 MHz
2.5
5.0
Cdg
Csg
NF
VDS = 0, VGS = - 10, f = 1.0 MHz
pF
dB
VDS = 10 V, ID = 10 mA,
f = 450 MHz
Equivalent Short-Circuit Input
Noise Voltage
VDS = 10 V, ID = 10 mA,
f = 100 Hz
6.0
en
nV/ÖHz
*Pulse Test: Pulse Width £300 ms, Duty Cycle £2.0%
N-Channel RF Amplifier
(continued)
Typical Characteristics
Transfer Characteristics
Transfer Characteristics
Transfer Characteristics
Transfer Characteristics
Forward Transadmittance
Input Admittance
N-Channel RF Amplifier
(continued)
Typical Characteristics (continued)
Output Conductance vs.
Drain Current
Common Drain-Source
Output Admittance
Capacitance vs. Voltage
Noise Voltage vs. Frequency
Reverse Transadmittance
N-Channel RF Amplifier
(continued)
Typical Characteristics (continued)
Transconductance vs.
Drain Current
Parameter Interactions
Leakage Current vs. Voltage
POWER DISSIPATION vs
AMBIENT TEMPERATURE
350
300
250
200
150
100
50
TO-92
SOT-23
0
0
25
50
75
100
125
150
TEMPERATURE ( C)
TO-92 Tape and Reel Data and Package Dimensions
TO-92 Packaging
Configuration: Figure 1.0
TAPE and REEL OPTION
FSCINT Label sample
See Fig 2.0 for various
FAIRCHILD SEMICONDUCTOR CORPORATION
HTB:B
Reeling Styles
LOT:
QTY:
10000
CBVK741B019
NSID:
D/C1:
SPEC:
PN2222N
FSCINT
Label
SPEC REV:
QA REV:
D9842
B2
5 Reels per
Intermediate Box
(FSCINT)
Customized
Label
F63TNR Label sample
LOT: CBVK741B019
F63TNR
Label
QTY: 2000
SPEC:
FSID: PN222N
Customized
Label
D/C1: D9842
D/C2:
QTY1:
QTY2:
SPEC REV:
CPN:
N/F: F
(F63TNR)3
375mm x 267mm x 375mm
Intermediate Box
TO-92 TNR/AMMO PACKING INFROMATION
AMMO PACK OPTION
See Fig 3.0 for 2 Ammo
Pack Options
Packing
Style
A
Quantity
2,000
EOL code
D26Z
Reel
E
2,000
D27Z
Ammo
M
2,000
D74Z
P
2,000
D75Z
FSCINT
Label
Unit weight
Reel weight with components
Ammo weight with components = 1.02 kg
= 0.22 gm
= 1.04 kg
Max quantity per intermediate box = 10,000 units
5 Ammo boxes per
Intermediate Box
327mm x 158mm x 135mm
Immediate Box
Customized
Label
F63TNR
Label
Customized
Label
333mm x 231mm x 183mm
Intermediate Box
(TO-92) BULK PACKING INFORMATION
BULK OPTION
See Bulk Packing
Information table
EOL
CODE
LEADCLIP
DESCRIPTION
QUANTITY
2.0 K / BOX
1.5 K / BOX
2.0 K / BOX
DIMENSION
J18Z
TO-18 OPTION STD
TO-5 OPTION STD
NO LEAD CLIP
Anti-static
Bubble Sheets
J05Z
NO LEAD CLIP
NO LEADCLIP
FSCINT Label
NO EOL
CODE
TO-92 STANDARD
STRAIGHT
2000 units per
EO70 box for
std option
114mm x 102mm x 51mm
Immediate Box
5 EO70 boxes per
intermediate Box
530mm x 130mm x 83mm
Intermediate box
Customized
Label
FSCINT Label
10,000 units maximum
per intermediate box
for std option
September 1999, Rev. B
TO-92 Tape and Reel Data and Package Dimensions, continued
TO-92 Reeling Style
Configuration: Figure 2.0
Machine Option “A” (H)
Machine Option “E” (J)
Style “A”, D26Z, D70Z (s/h)
Style “E”, D27Z, D71Z (s/h)
TO-92 Radial Ammo Packaging
Configuration: Figure 3.0
FIRST WIRE OFF IS COLLECTOR
FIRST WIRE OFF IS EMITTER
ADHESIVE TAPE IS ON THE TOP SIDE
FLAT OF TRANSISTOR IS ON TOP
ADHESIVE TAPE IS ON THE TOP SIDE
FLAT OF TRANSISTOR IS ON BOTTOM
ORDER STYLE
ORDER STYLE
D74Z (M)
D75Z (P)
FIRST WIRE OFF IS COLLECTOR (ON PKG. 92)
ADHESIVE TAPE IS ON BOTTOM SIDE
FLAT OF TRANSISTOR IS ON TOP
FIRST WIRE OFF IS EMITTER (ON PKG. 92)
ADHESIVE TAPE IS ON BOTTOM SIDE
FLAT OF TRANSISTOR IS ON BOTTOM
September 1999, Rev. B
TO-92 Tape and Reel Data and Package Dimensions, continued
TO-92 Tape and Reel Taping
Dimension Configuration: Figure 4.0
Hd
P
Pd
b
Ha
W1
d
S
L
H1
HO
L1
WO
t
W2
W
t1
P1 F1
P2
DO
ITEM DESCRIPTION
SYMBOL
DIMENSION
PO
b
0.098 (max)
Base of Package to Lead Bend
Component Height
Ha
HO
H1
Pd
Hd
P
0.928 (+/- 0.025)
0.630 (+/- 0.020)
0.748 (+/- 0.020)
0.040 (max)
User Direction of Feed
Lead Clinch Height
Component Base Height
Component Alignment ( side/side )
Component Alignment ( front/back )
Component Pitch
0.031 (max)
0.500 (+/- 0.020)
0.500 (+/- 0.008)
0.150 (+0.009, -0.010)
0.247 (+/- 0.007)
0.104 (+/- 0 .010)
0.018 (+0.002, -0.003)
0.429 (max)
PO
P1
P2
F1/F2
d
Feed Hole Pitch
Hole Center to First Lead
Hole Center to Component Center
Lead Spread
Lead Thickness
L
Cut Lead Length
L1
t
0.209 (+0.051, -0.052)
0.032 (+/- 0.006)
0.021 (+/- 0.006)
0.708 (+0.020, -0.019)
0.236 (+/- 0.012)
0.035 (max)
Taped Lead Length
Taped Lead Thickness
Carrier Tape Thickness
Carrier Tape Width
t1
W
TO-92 Reel
Configuration: Figure 5.0
Hold - down Tape Width
Hold - down Tape position
Feed Hole Position
WO
W1
W2
DO
S
0.360 (+/- 0.025)
0.157 (+0.008, -0.007)
0.004 (max)
Sprocket Hole Diameter
Lead Spring Out
Note : All dimensions are in inches.
ELECTROSTATIC
SENSITIVE DEVICES
D4
D1
ITEM DESCRIPTION
SYSMBOL MINIMUM
MAXIMUM
D2
Reel Diameter
D1
D2
D2
D3
D4
W1
W2
W3
13.975
1.160
0.650
3.100
2.700
0.370
1.630
14.025
1.200
0.700
3.300
3.100
0.570
1.690
2.090
F63TNR Label
Arbor Hole Diameter (Standard)
(Small Hole)
Customized Label
Core Diameter
Hub Recess Inner Diameter
Hub Recess Depth
Flange to Flange Inner Width
Hub to Hub Center Width
W1
W3
W2
Note: All dimensions are inches
D3
July 1999, Rev. A
TO-92 Tape and Reel Data and Package Dimensions, continued
TO-92 (FS PKG Code 92, 94, 96)
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
Part Weight per unit (gram): 0.1977
September 1998, Rev. A1
SOT-23 Tape and Reel Data and Package Dimensions
SOT-23 Packaging
Configuration: Figure 1.0
Packaging Description:
SOT-23 parts are shipped in tape. The carrier tape is
Customized Label
made from dissipative (carbon filled) polycarbonate
a
resin. The cover tape is a multilayer film (Heat Activated
Adhesive in nature) primarily composed of polyester film,
adhesive layer, sealant, and anti-static sprayed agent.
These reeled parts in standard option are shipped with
3,000 units per 7" or 177cm diameter reel. The reels are
dark bluein color and is madeof polystyrene plastic (anti-
static coated). Other option comes in 10,000 units per 13"
or 330cm diameter reel. This and some other options are
described in the Packaging Information table.
Antistatic Cover Tape
These full reels areindividually labeled and placed inside
a
standard intermediate made of recyclable corrugated
brown paper with aFairchild logo printing. One pizza box
contains eight reels maximum. And these intermediate
boxes are placed inside a labeled shipping box which
comesin different sizes depending on the number of parts
shipped.
Human Readable
Label
Embossed
CarrierTape
3P
3P
3P
3P
SOT-23 PackagingInformation
Standard
(no flow code)
PackagingOption
D87Z
Packagingtype
TNR
TNR
10,000
13"
SOT-23 Unit Orientation
Qty per Reel/Tube/Bag
Reel Size
3,000
7" Dia
Box Dimension (mm)
Max qty per Box
187x107x183 343x343x64
343mmx 342mmx 64mm
Intermediate box for L87Z Option
Human Readable Label
24,000
0.0082
0.1175
30,000
0.0082
0.4006
Weight per unit (gm)
Weight per Reel (kg)
Note/Comments
Human Readable Label sample
Human readable
Label
187mmx 107mmx 183mm
SOT-23 Tape Leader and Trailer
IntermediateBox forStandard Option
Configuration: Figure 2.0
Carrier Tape
Cover Tape
Components
Trailer Tape
Leader Tape
300mm minimumor
75 empty pockets
500mm minimumor
125 empty pockets
September 1999, Rev. C
SOT-23 Tape and Reel Data and Package Dimensions, continued
SOT-23 Embossed Carrier Tape
Configuration: Figure 3.0
P0
P2
D0
D1
T
E1
E2
W
F
Wc
B0
Tc
K0
A0
P1
User Direction of Feed
Dimensions are in millimeter
E1 E2
A0
B0
W
D0
D1
F
P1
P0
K0
T
Wc
5.2
Tc
Pkg type
SOT-23
(8mm)
3.15
+/-0.10
2.77
+/-0.10
8.0
+/-0.3
1.55
+/-0.05
1.125
1.75
+/-0.10
6.25
min
3.50
+/-0.05
4.0
+/-0.1
4.0
+/-0.1
1.30
+/-0.10
0.228
+/-0.013
0.06
+/-0.02
+/-0.125
+/-0.3
Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481
rotational and lateral movement requirements (see sketches A, B, and C).
0.5mm
maximum
20 deg maximum
Typical
component
cavity
center line
0.5mm
maximum
B0
20 deg maximum component rotation
Typical
component
center line
Sketch A (Side or Front Sectional View)
Component Rotation
Sketch C (Top View)
Component lateral movement
A0
Sketch B (Top View)
Component Rotation
SOT-23 Reel Configuration: Figure 4.0
W1 Measured at Hub
Dim A
Max
Dim A
max
See detail AA
Dim N
7"Diameter Option
B Min
Dim C
See detail AA
Dim D
min
W3
13" Diameter Option
W2 max Measured at Hub
DETAIL AA
Dim W2
Dimensions are in inches and millimeters
Reel
Option
Tape Size
8mm
Dim A
Dim B
Dim C
Dim D
Dim N
Dim W1
Dim W3 (LSL-USL)
7.00
177.8
0.059
1.5
512 +0.020/-0.008
13 +0.5/-0.2
0.795
20.2
2.165
55
0.331 +0.059/-0.000
8.4 +1.5/0
0.567
14.4
0.311 – 0.429
7.9 – 10.9
7" Dia
13.00
330
0.059
1.5
512 +0.020/-0.008
13 +0.5/-0.2
0.795
20.2
4.00
100
0.331 +0.059/-0.000
8.4 +1.5/0
0.567
14.4
0.311 – 0.429
7.9 – 10.9
8mm
13" Dia
September 1999, Rev. C
SOT-23 Tape and Reel Data and Package Dimensions, continued
SOT-23 (FS PKG Code 49)
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
Part Weight per unit (gram): 0.0082
September 1998, Rev. A1
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ACEx™
CoolFET™
ISOPLANAR™
MICROWIRE™
POP™
PowerTrench™
QS™
UHC™
VCX™
CROSSVOLT™
E2CMOSTM
FACT™
FACT Quiet Series™
Quiet Series™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
TinyLogic™
FAST®
FASTr™
GTO™
HiSeC™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, or (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the
user.
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or
In Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Obsolete
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
相关型号:
J309D71Z
RF Small Signal Field-Effect Transistor, 1-Element, Ultra High Frequency Band, Silicon, N-Channel, Junction FET, TO-92
FAIRCHILD
J309D74Z
RF Small Signal Field-Effect Transistor, 1-Element, Ultra High Frequency Band, Silicon, N-Channel, Junction FET, TO-92, TO-92, 3 PIN
FAIRCHILD
J309D75Z
RF Small Signal Field-Effect Transistor, 1-Element, Ultra High Frequency Band, Silicon, N-Channel, Junction FET, TO-92, TO-92, 3 PIN
FAIRCHILD
J309J05Z
RF Small Signal Field-Effect Transistor, 1-Element, Ultra High Frequency Band, Silicon, N-Channel, Junction FET, TO-92, TO-92, 3 PIN
FAIRCHILD
J309J18Z
RF Small Signal Field-Effect Transistor, 1-Element, Ultra High Frequency Band, Silicon, N-Channel, Junction FET, TO-92, TO-92, 3 PIN
FAIRCHILD
J309L-18
RF Small Signal Field-Effect Transistor, 1-Element, Ultra High Frequency Band, Silicon, N-Channel, Junction FET, TO-226AA,
TEMIC
J309L-18
RF Small Signal Field-Effect Transistor, 1-Element, Ultra High Frequency Band, Silicon, N-Channel, Junction FET, TO-226AA
VISHAY
©2020 ICPDF网 联系我们和版权申明