LM431AIMX [FAIRCHILD]

Programmable Shunt Regulator; 可编程并联稳压器
LM431AIMX
型号: LM431AIMX
厂家: FAIRCHILD SEMICONDUCTOR    FAIRCHILD SEMICONDUCTOR
描述:

Programmable Shunt Regulator
可编程并联稳压器

稳压器 电源电路 参考电压源 光电二极管 输出元件
文件: 总11页 (文件大小:230K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
June 2013  
LM431A / LM431B / LM431C  
Programmable Shunt Regulator  
Features  
Description  
• Programmable Output Voltage to 36 V  
• Low Dynamic Output Impedance: 0.2 Ω (Typical)  
• Sink Current Capability: 1.0 to 100 mA  
• Equivalent Full-Range Temperature Coefficient of  
50 ppm/°C (Typical)  
The LM431A / LM431B / LM431C are three-terminal out-  
put adjustable regulators with thermal stability over the  
full operating temperature range. The output voltage can  
be set to any value between VREF (approximately 2.5 V)  
and 36 V with two external resistors. These devices have  
a typical dynamic output impedance of 0.2 Ω. Active out-  
put circuit provides a sharp turn-on characteristic, mak-  
ing these devices excellent replacements for Zener  
diodes in many applications.  
Temperature Compensated for Operation Over Full  
Rated Operating Temperature Range  
• Low Output Noise Voltage  
• Fast Turn-on Response  
TO-92  
1
1. Ref 2. Anode 3. Cathode  
8-SOIC  
1
1.Cathode 2.3.6.7.Anode  
4.5.NC 8.Ref  
Ordering Information  
Operating  
Temperature  
Range  
OutputVoltage  
Part Number  
Top Mark  
Package  
Packing Method  
Tolerance  
LM431CCZ  
LM431CCMX  
LM431BCZX  
LM431BCZXA  
LM431BCMX  
LM431ACZ  
LM431CCZ  
LM431CCM  
LM431BCZ  
LM431BCZ  
LM431BCM  
LM431ACZ  
LM431ACZ  
LM431ACM  
LM431CIM  
LM431BIZ  
LM431AIZ  
LM431AIM  
TO-92  
8-SOIC  
TO-92  
TO-92  
8-SOIC  
TO-92  
TO-92  
8-SOIC  
8-SOIC  
TO-92  
TO-92  
8-SOIC  
Bulk  
0.5%  
Tape and Reel  
Tape and Reel  
Ammo  
1%  
2%  
-25 ~ +85°C  
Tape and Reel  
Bulk  
LM431ACZX  
LM431ACMX  
LM431CIMX  
LM431BIZX  
LM431AIZ  
Tape and Reel  
Tape and Reel  
Tape and Reel  
Tape and Reel  
Bulk  
0.5%  
1%  
-40 ~ +85°C  
2%  
LM431AIMX  
Tape and Reel  
© 2003 Fairchild Semiconductor Corporation  
LM431A / LM431B / LM431C Rev. 1.2.0  
www.fairchildsemi.com  
1
Block Diagram  
CATHODE  
REFERENCE  
+
-
2.5 Ref  
ANODE  
CATHODE (K)  
REFERENCE (R)  
ANODE (A)  
Figure 1. Block Diagram  
Absolute Maximum Ratings  
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera-  
ble above the recommended operating conditions and stressing the parts to these levels is not recommended. In addi-  
tion, extended exposure to stresses above the recommended operating conditions may affect device reliability. The  
absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.  
Symbol  
VKA  
Parameter  
Value  
37  
Unit  
V
Cathode Voltage  
IKA  
Cathode Current Range (Continuous)  
Reference Input Current Range  
-100 ~ +150  
-0.05 ~ +10  
mA  
mA  
IREF  
Power Dissipation  
TO-92, 8-SOIC Packages  
PD  
770  
160  
mW  
Thermal Resistance, Junction to Ambient  
TO-92, 8-SOIC Packages  
RθjA  
°C/W  
Operating Temperature Range LM431xC  
Operating Temperature Range LM431xI  
Junction Temperature  
-25 ~ +85  
-40 ~ +85  
150  
°C  
°C  
°C  
°C  
TOPR  
TJ  
TSTG  
Storage Temperature Range  
-65 ~ +150  
Recommended Operating Conditions  
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended  
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not  
recommend exceeding them or designing to Absolute Maximum Ratings.  
Symbol  
VKA  
Parameter  
Min.  
VRef  
1.0  
Max.  
36  
Unit  
V
Cathode Voltage  
Cathode Current  
IKA  
100  
mA  
© 2003 Fairchild Semiconductor Corporation  
LM431A / LM431B / LM431C Rev. 1.2.0  
www.fairchildsemi.com  
2
Electrical Characteristics  
Values are at TA = 25°C unless otherwise noted.  
LM431A  
LM431B  
LM431C  
Symbol Parameter  
Conditions  
VKA = VREF  
Unit  
Min. Typ. Max. Min. Typ. Max. Min. Typ. Max.  
Reference  
VREF  
,
2.450 2.500 2.550 2.470 2.495 2.520 2.482 2.495 2.508  
V
Input Voltage IKA = 10 mA  
Deviation of  
Reference  
InputVoltage IKA =10 mA  
Over-  
Temperature  
VKA = VREF,  
ΔVREF  
ΔT  
/
/
4.5 17.0  
-1.0 -2.7  
4.5 17.0  
-1.0 -2.7  
4.5 17.0  
-1.0 -2.7  
mV  
(1)  
TMIN TA TMAX  
Ratio of  
Change in  
Reference  
Input Voltage IKA =  
ΔVKA  
10V-VREF  
=
ΔVREF  
ΔVKA  
mV / V  
to the  
10 mA  
ΔVKA  
=
-0.5 -2.0  
-0.5 -2.0  
-0.5 -2.0  
Change in  
Cathode  
Voltage  
36V-10V  
Reference  
Input Current R1 =10 kΩ, R2 = ∞  
IKA = 10 mA,  
IREF  
1.5  
0.4  
4.0  
1.2  
1.5  
0.4  
4.0  
1.2  
1.5  
0.4  
4.0  
1.2  
μA  
μA  
mA  
Deviation of  
Reference  
IKA = 10 mA,  
Input Current  
R1 = 10 kΩ, R2 = ∞  
Over Full  
ΔIREF  
ΔT  
/
TA = Full Range  
Temperature  
Range  
Minimum  
Cathode  
Cur-rent for  
IKA(MIN)  
VKA = VREF  
0.45 1.00  
0.45 1.00  
0.45 1.00  
Regulation  
Off - Stage  
VKA = 36 V,  
IKA(OFF) Cathode  
Current  
0.05 1.00  
0.15 0.50  
0.05 1.00  
0.15 0.50  
0.05 1.00  
0.15 0.50  
μA  
VREF = 0  
Dynamic  
VKA = VREF,  
ZKA  
Note:  
Impedance  
IKA =1 to 100 mA  
Ω
f 1.0 kHz  
1. LM431xC: TMIN = -25°C, TMAX = +85°C.  
LM431xI: TMIN = -40°C, TMAX = +85°C.  
© 2003 Fairchild Semiconductor Corporation  
LM431A / LM431B / LM431C Rev. 1.2.0  
www.fairchildsemi.com  
3
Test Circuits  
LM431  
LM431  
Figure 3. Test Circuit for VKA VREF  
Figure 2. Test Circuit for VKA= VREF  
LM431  
Figure 4. Test Circuit for IKA(OFF)  
© 2003 Fairchild Semiconductor Corporation  
LM431A / LM431B / LM431C Rev. 1.2.0  
www.fairchildsemi.com  
4
Typical Performance Characteristics  
Figure 5. Cathode Current vs. Cathode Voltage  
Figure 6. Cathode Current vs. Cathode Voltage  
Figure 7. Change In Reference Input Voltage vs.  
Cathode Voltage  
Figure 8. Dynamic Impedance Frequency  
Figure 9. Small Signal Voltage Amplification vs.  
Frequency  
Figure 10. Pulse Response  
© 2003 Fairchild Semiconductor Corporation  
www.fairchildsemi.com  
LM431A / LM431B / LM431C Rev. 1.2.0  
5
Typical Performance Characteristics (Continued)  
140  
A
B
A VKA = Vref  
120  
100  
80  
60  
40  
20  
0
B VKA = 5.0 V @ IK = 10mA  
C VKA = 10 V @ IK = 10mA  
D VKA = 15 V @ IK = 10mA  
TA = 25oC  
C
D
100p  
1n  
10n  
100n  
1?  
10?  
CL, LOAD CAPACITANCE  
Figure11. Stability Boundary Conditions  
© 2003 Fairchild Semiconductor Corporation  
LM431A / LM431B / LM431C Rev. 1.2.0  
www.fairchildsemi.com  
6
Typical Application  
R
R
R
1
1
1
V
= V  
1 + -------  
V
=
1 + ------- V  
V
=
1 + ------- V  
ref  
O
ref  
O
ref  
R
2
O
R
R
2
2
LM431  
LM431  
LM431  
Figure 12. Shunt Regulator  
Figure 13. Output Control for Three-  
Terminal Fixed Regulator  
Figure 14. High-Current Shunt  
Regulator  
LM431  
LM431  
Figure 15. Current Limit or Current Source  
Figure 16. Constant-Current Sink  
© 2003 Fairchild Semiconductor Corporation  
LM431A / LM431B / LM431C Rev. 1.2.0  
www.fairchildsemi.com  
7
Physical Dimensions  
TO-92 Bulk Type  
D)  
DRAWING FILENAME: MKT-ZA03DREV3.  
Figure 17. 3-Lead, TO-92, Molded, Standard Straight Lead  
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner  
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or  
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the  
warranty therein, which covers Fairchild products.  
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:  
http://www.fairchildsemi.com/packaging/.  
© 2003 Fairchild Semiconductor Corporation  
LM431A / LM431B / LM431C Rev. 1.2.0  
www.fairchildsemi.com  
8
Physical Dimensions (Continued)  
TO-92 Ammo Type, Tape and Reel Type  
D) DRAWING FILENAME: MKT-ZA03FREV2.  
Figure 18. 3-Lead, TO-92, Molded, 0.200 in Line Spacing Lead Form  
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner  
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or  
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the  
warranty therein, which covers Fairchild products.  
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:  
http://www.fairchildsemi.com/packaging/.  
For current tape and reel specifications, visit Fairchild Semiconductor’s online packaging area:  
http://www.fairchildsemi.com/products/discrete/pdf/to92_tr.pdf.  
© 2003 Fairchild Semiconductor Corporation  
LM431A / LM431B / LM431C Rev. 1.2.0  
www.fairchildsemi.com  
9
Physical Dimensions (Continued)  
8-SOIC  
5.00  
4.80  
A
0.65  
3.81  
8
5
B
1.75  
6.20  
5.80  
4.00  
3.80  
5.60  
1
4
PIN ONE  
INDICATOR  
1.27  
1.27  
(0.33)  
0.25  
C B A  
LAND PATTERN RECOMMENDATION  
SEE DETAIL A  
0.25  
0.10  
0.25  
0.19  
C
1.75 MAX  
0.10  
0.51  
0.33  
OPTION A - BEVEL EDGE  
0.50  
x 45°  
GAGE PLANE  
0.25  
R0.10  
R0.10  
OPTION B - NO BEVEL EDGE  
0.36  
NOTES: UNLESS OTHERWISE SPECIFIED  
8°  
0°  
0.90  
0.40  
A) THIS PACKAGE CONFORMS TO JEDEC  
MS-012, VARIATION AA.  
B) ALL DIMENSIONS ARE IN MILLIMETERS.  
C) DIMENSIONS DO NOT INCLUDE MOLD  
FLASH OR BURRS.  
D) LANDPATTERN STANDARD: SOIC127P600X175-8M.  
E) DRAWING FILENAME: M08Arev14  
F) FAIRCHILD SEMICONDUCTOR.  
SEATING PLANE  
(1.04)  
DETAIL A  
SCALE: 2:1  
Figure 19. 8-Lead, SOIC, JEDEC MS 0-12, 0.150 inch Narrow Body  
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner  
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or  
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the  
warranty therein, which covers Fairchild products.  
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:  
http://www.fairchildsemi.com/packaging/.  
For current tape and reel specifications, visit Fairchild Semiconductor’s online packaging area:  
http://www.fairchildsemi.com/products/discrete/pdf/soic8_tr.pdf.  
© 2003 Fairchild Semiconductor Corporation  
LM431A / LM431B / LM431C Rev. 1.2.0  
www.fairchildsemi.com  
10  
TRADEMARKS  
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not  
intended to be an exhaustive list of all such trademarks.  
Sync-Lock™  
2Cool¥  
FPS¥  
®
AccuPower¥  
F-PFS¥  
®*  
AX-CAP®*  
BitSiC¥  
Build it Now¥  
CorePLUS¥  
CorePOWER¥  
CROSSVOLT¥  
CTL¥  
FRFET®  
PowerTrench®  
PowerXS™  
Programmable Active Droop¥  
QFET®  
Global Power ResourceSM  
GreenBridge¥  
Green FPS¥  
Green FPS¥ e-Series¥  
Gmax¥  
TinyBoost¥  
TinyBuck¥  
TinyCalc¥  
TinyLogic®  
TINYOPTO¥  
TinyPower¥  
TinyPWM¥  
TinyWire¥  
TranSiC¥  
QS¥  
Quiet Series¥  
RapidConfigure¥  
¥
GTO¥  
IntelliMAX¥  
Current Transfer Logic¥  
DEUXPEED®  
Dual Cool™  
EcoSPARK®  
EfficientMax¥  
ISOPLANAR¥  
Making Small Speakers Sound Louder  
and Better™  
Saving our world, 1mW/W/kW at a time™  
SignalWise¥  
SmartMax¥  
TriFault Detect¥  
TRUECURRENT®*  
PSerDes¥  
MegaBuck¥  
SMART START¥  
Solutions for Your Success¥  
SPM®  
ESBC¥  
MICROCOUPLER¥  
MicroFET¥  
®
MicroPak¥  
Fairchild®  
STEALTH¥  
UHC®  
Ultra FRFET¥  
UniFET¥  
VCX¥  
VisualMax¥  
VoltagePlus¥  
XS™  
MicroPak2¥  
Fairchild Semiconductor®  
FACT Quiet Series¥  
FACT®  
SuperFET®  
MillerDrive¥  
SuperSOT¥-3  
MotionMax¥  
SuperSOT¥-6  
mWSaver¥  
FAST®  
SuperSOT¥-8  
OptoHiT¥  
SupreMOS®  
FastvCore¥  
OPTOLOGIC®  
OPTOPLANAR®  
FETBench¥  
SyncFET¥  
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.  
DISCLAIMER  
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE  
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT  
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE  
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,  
WHICH COVERS THESE PRODUCTS.  
LIFE SUPPORT POLICY  
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE  
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.  
As used herein:  
1. Life support devices or systems are devices or systems which, (a) are  
intended for surgical implant into the body or (b) support or sustain  
life, and (c) whose failure to perform when properly used in  
accordance with instructions for use provided in the labeling, can be  
reasonably expected to result in a significant injury of the user.  
2. A critical component in any component of a life support, device, or  
system whose failure to perform can be reasonably expected to  
cause the failure of the life support device or system, or to affect its  
safety or effectiveness.  
ANTI-COUNTERFEITING POLICY  
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,  
under Sales Support.  
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their  
parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed  
applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the  
proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild  
Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors  
are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical  
and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise.  
Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global  
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.  
PRODUCT STATUS DEFINITIONS  
Definition of Terms  
Datasheet Identification  
Product Status  
Definition  
Datasheet contains the design specifications for product development. Specifications may change  
in any manner without notice.  
Advance Information  
Formative / In Design  
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild  
Semiconductor reserves the right to make changes at any time without notice to improve design.  
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make  
changes at any time without notice to improve the design.  
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.  
The datasheet is for reference information only.  
Preliminary  
No Identification Needed  
Obsolete  
First Production  
Full Production  
Not In Production  
Rev. I64  
© Fairchild Semiconductor Corporation  
www.fairchildsemi.com  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY