GBPC2508 [FCI]
25 Amp Glass Passivated SINGLE PHASE SILICON BRIDGE; 25安培玻璃钝化单相硅桥
| 型号： | GBPC2508 |
| 厂家： | 
FIRST COMPONENTS INTERNATIONAL |
| 描述： | 25 Amp Glass Passivated SINGLE PHASE SILICON BRIDGE |
| 文件： | 总4页 (文件大小：670K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Description
GBPC
Mechanical Data
¬ Case: Molded plastic body over passivated
Features
junctions
¬ Plastic package has Underwriters
Laboratory Flammability Classification
94V-0
method 208
¬ Terminals: Solderable per MIL-STD-202,
¬ Polarity: As marked on body
¬ High surge current capability
¬ Mounting position: Any
¬ Weight: 0.63 ounce, 18 grams
¬ Ideal for printed circuit boards
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
o
Rating at 25 C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
GBPC GBPC GBPC GBPC GBPC GBPC GBPC GBPC
SYMBOL
UNIT
2500
2502
2504
2506 2508 2510
2501
2512
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
VRRM
VRMS
VDC
50
35
50
100
70
200
140
200
400
280
400
600
420
600
800
560
1000 1200
V
840
700
V
V
Maximum DC Blocking Voltage
100
800 1000
1200
Maximum Average Forward Rectified
Current TC=70oC
25.0
A
I(AV)
IFSM
Peak Forward Surge Current, 8.3ms single
Half sine-wave superimposed on rated load
(JEDEC method)
300
1.1
A
Maximum Instantaneous Forward Voltage
@ 12.5 A
VF
IR
V
Maximum DC Reverse Current @TJ=25oC
At Rated DC Blocking Voltage @TJ=125oC
5.0
uA
500
Rating for fusing (t < 8.3ms)
I2t
374
130
1.3
A2S
pF
CJ
Typical junction Capacitance (Note 1)
Typical Thermal Resistance (Note 2)
oC/W
R JC
Operating Junctionand Storage
Temperature Range
TJ, TSTG
-55 to + 150
oC
NOTES : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC.
(2) Thermal Resistance form junction to case mounted on P.C.B with 0.5 x 0.5"(13x13mm) copper pads.
FIG.2 - MAXIMUM NON-REPETITIVE
PEAK FORWARD SURGE CURRENT
FIG.1 - FORWARD CURRENT DERATING CURVE
25
300
250
200
150
100
50
Pulse Width 8.3ms
Single Half-Sire-Wave
(JEDEC Method)
20
15
10
5
60 Hz Resistive or
Inductive load
0
0
0
50
100
150
1
10
100
CASE TEMPERATURE, oC
NUMBER OF CYCLES AT 60Hz
FIG.3 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
FIG.4 - TYPICAL REVERSE CHARACTERISTICS
10
1.0
100
TJ=125oC
10
1
0.1
0.1
TJ=25oC
TJ=25oC
PULSE WIDTH=300uS
1% DUTY CYCLE
0.01
0.01
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0
20
40
60
80
100
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
PERCENT OF RATED PEAK REVERSE VOLTAGE,%
FIG.5 - TYPICAL JUNCTION CAPACITANCE
1000
100
10
TJ = 25oC
f = 1.0 MHZ
Vsig = 50mVp-p
0.1
1.0
4.0 10
100
REVERSE VOLTAGE, VOLTS
Ratings at
25 Deg. C ambient
temperature
unless otherwise
specified.
Single Phase Half
Wave, 60 HZ
Resistive or
Inductive Load.
For Capacitive
Load, Derate
Current by 20%.
NOTES: 1. Corrosion-Resistant Terminals Designed for .250" Female Quick Connect Wrap Around
or Solder.
2. A Thin Film of Silicone Thermal Compound is Recommended Between Bridge and
Mounting Surface for Improved Thermal Conduction.
3. These FCI Bridges Are Also Available in Fast Recovery, In Positive and Negative Center
Tap and in Double Configurations. Consult with FCI for Your Special Requirements.
Case - Metal or Molded Plastic
AC In
Terminals - Plated .25" Faston or Plated Copper Wire
Leads .040" Diameter
Weight - 0.706 Ounces, 20 Grams
Mounting Position - Any with Bolt Down with Silicone
Thermal Compound Between Bridge and
Mounting Surface for Optimum Heat
Transfer
DC Out
Mounting Torque - 20 Inch Pound Max
Ordering Information
FCI'S GBPC Series of Bridge Can be Ordered with Options on Terminals and case Materials
How To Specify Case Material and Terminal Options:
n For Metal Case, Order Suffix (1) M
n For Plastic Case, Order Suffix (1) P
n For Faston Terminals, Order Suffix (2) F
n For Wire Lead Terminals, Order Suffix (2) W
GBPC Series Examples
To Order a 25 Amp, 400 Volt Bridge with Faston Leads and a Plastic Case:
Specify GBPC 2504PF-----Where" P " =Plastic and " F " =Faston Terminals
To Order a 35 Amp, 800 Volt Bridge with Wire Leads and a Metal Case:
Specify GBPC 3508MW-----Where" M " =Metal and " W " =Wire Lead Terminals
To Order a 15 Amp, 200 Volt, UL Recognized Bridge with Wire Leads and a Plastic Case:
Specify GBPC 1502PWU-----Where" P " =Plastic and " W " =ire Lead Terminals and " U "= UL Recognized
NOTE: Fast Recovery Bridges (Diodes) Are Available; Please Contact FCI Components.
GBPC " S " Series Examples
To Order Bridges with the In-Line Pin Configuration, Select the Current and Voltage Desired and Add S as the Suffix, as
shown in the following example.
To Order a 35 Amp, 800 Volt Bridge with In-Line Wire Leads:
Specify GBPC 3508S-----Where" S " = In line Wire Lead Terminals
相关型号：
GBPC2508APBF
Bridge Rectifier Diode, 1 Phase, 25A, 800V V(RRM), Silicon, ROHS COMPLIANT, PLASTIC PACKAGE-4
INFINEON
GBPC2508S-LF
Bridge Rectifier Diode, 1 Phase, 25A, 800V V(RRM), Silicon, ROHS COMPLIANT, PLASTIC, KBPC-S, SIP-4
WTE
©2020 ICPDF网 联系我们和版权申明