F4P4532L-220 [FENGJUI]
EMI SOLOTION PRODUCTS-RoHS;
| 型号： | F4P4532L-220 |
| 厂家： | 
FENGJUI TECHNOLOGY CO., LTD. |
| 描述： | EMI SOLOTION PRODUCTS-RoHS |
| 文件： | 总3页 (文件大小：754K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
FENG-JUI TECHNOLOGY CO., LTD EMI SOLOTION PRODUCTS-RoHS
F4P4532L TYPE
●FEATURE
1. For automobile signal line
2. Same as TDK ACT45B type
●Applications
1. CAN-BUS, FAXs, modems, ISDNs, etc
●Shape and Dimension and Schematics and Land Patterns(mm)
F4P4532L (1812)
1
4
3
2
●Specification
Dimension in m/m
Common Mode
INDUCTANCE (uH)
(+50%/-30%)
Rated
Current
Rated Voltage
(Vdc)
Insulation
Resistance
Withstand DC Resistance
PART NO.
Voltage
(max.)
(mA)
250
200
200
150
(M ohm)
(Vdc)
(ohm)
F4P4532L-110
F4P4532L-220
F4P4532L-510
F4P4532L-101
11uH at 100KHz
22uH at 100KHz
51uH at 100KHz
100uH at 100KHz
50
50
50
50
10 min
10 min
10 min
10 min
125
125
125
125
0.6
1.0
1.0
2.0
Note1. Measurement ambient temperature of electrical : at 20℃
Note2. Test equipment: HP4291A
Your Perfect Inductor
Rev.1801
FENG-JUI TECHNOLOGY CO., LTD EMI SOLOTION PRODUCTS-RoHS
●F4P 4532L(Impedance VS Frequency)
●Test circuit
IN
OUT
1
4
1
4
2
3
2
3
IN
OUT
COMMON MODE
NORMAL MODE
Your Perfect Inductor
Rev.1801
FENG-JUI TECHNOLOGY CO., LTD EMI SOLOTION PRODUCTS-RoHS
GENERAL CHARACTERISTICS
1. Operating temperature range: -40 TO + 125℃(Includes temperature when the coil is heated)
2. External appearance: On visual inspection, the coil has no external defects.
3. Terminal strength: After soldering. Between copper plate and terminals of coil. Push in two directions of X.Y
withstanding at below conditions.
Terminal should not peel off. (refer to figure at right) 0.5kg Min –F4P4532L.
4. Insulating resistance: Over 100MΩ at 100V D.C. between coil and core.
5. Dielectric strength: No dielectric breakdown at 100V D.C. for 1 minute between coil and core.
6. Temperature characteristics: Inductance coefficient (0~2,000)x10-6/℃(-25~+80℃). , inductance deviation
within±5.0%, after 96 hours.
7. Humidity characteristics(Moisture Resistance): Inductance deviation within ±5%, after 96 hours in 90~95%
relative humidity at 40 ±2℃and 1 hour drying under normal condition.
8. Vibration resistance: Inductance deviation within ±5%, after vibration for 1 hour. In each of three orientations
at sweep vibration (10~55~10 Hz) with 1.5mm P-P amplitudes.
9. Shock resistance: Inductance deviation within ±5%, after being dropped once with 981m/s2 (100G) shock
attitude upon a rubber block method shock testing machine, in three different orientations.
10. Resistance to Soldering Heat: 260℃, 10 seconds(See attached recommend reflow)
11. Storage environment: Storage condition: Temperature Range: 10℃ ~ 35℃ (Generally: 21℃ ~ 31℃)
,
Humidity Range: 50% ~ 80% RH (Generally: 65% ~ 75%) ; Transportation condition: Temperature Range:
-35℃ ~ 85℃ , Humidity Range: 50% ~ 95% RH
12. Use components within 12 months. If 12 months or more have elapsed, check solderability before use.
13. Reflow profile recommend:
Lead-free heat en duran ce test
Lead-free the recommended reflow condition
T( ℃ )
T(℃)
3 0 0
2 5 0
2 0 0
1 5 0
300
26 0 ℃
23 0℃
245℃ Peak
250
230℃
200
40
10
150
6 0
170±10℃,60-120S
1 0 0
5 0
0
100
50
T(s
0
T(s)
0
6 0
1 20
18 0
24 0
3 0 0
0
60
120
180
240
300
Your Perfect Inductor
Rev.1801
相关型号：
©2020 ICPDF网 联系我们和版权申明