E30-3F3-A400 [FERROXCUBE]
E cores and accessories; E形磁芯及配件
| 型号： | E30-3F3-A400 |
| 厂家： | 
FERROXCUBE INTERNATIONAL HOLDING B.V. |
| 描述： | E cores and accessories |
| 文件： | 总7页 (文件大小：70K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
FERROXCUBE
DATA SHEET
E30/15/7
E cores and accessories
Supersedes data of September 2004
2008 Sep 01
Ferroxcube
E cores and accessories
E30/15/7
CORE SETS
Effective core parameters
0
30.8
−1.4
handbook, halfpage
SYMBOL
PARAMETER
core factor (C1)
VALUE UNIT
+1.0
19.5
7.2
0
Σ(I/A)
Ve
1.12
4000
67.0
60.0
49.0
≈ 11
mm−1
mm3
mm
mm2
mm2
g
0
−0.5
effective volume
effective length
effective area
Ie
+0.5
0
9.7
R ≤ 0.5
Ae
15
±0.2
Amin
m
minimum area
mass of core half
R1
0
−0.5
7.3
CBW032
Dimensions in mm.
Fig.1 E30/15/7 core half.
Core halves
AL measured in combination with a non-gapped core half, clamping force for AL measurements 20 ±10 N, unless stated
otherwise.
AL
(nH)
100 ±5%(1)
160 ±5%
TOTAL AIR GAP
GRADE
3C81
µe
TYPE NUMBER
(µm)
≈ 89
≈142
≈ 1100
≈ 580
≈ 330
≈ 240
≈ 180
≈ 100
≈ 0
E30/15/7-3C81-E100
E30/15/7-3C81-A160
E30/15/7-3C81-A250
E30/15/7-3C81-A315
E30/15/7-3C81-A400
E30/15/7-3C81-A630
E30/15/7-3C81
250 ±5%
≈ 222
≈ 280
≈ 355
≈ 560
≈ 2220
≈ 89
315 ±5%
400 ±8%
630 ±±5%
2500 ±25%
100 ±5%(1)
160 ±5%
3C90
≈ 1100
≈ 580
≈ 330
≈ 240
≈ 180
≈ 100
≈ 0
E30/15/7-3C90-E100
E30/15/7-3C90-A160
E30/15/7-3C90-A250
E30/15/7-3C90-A315
E30/15/7-3C90-A400
E30/15/7-3C90-A630
E30/15/7-3C90
≈142
250 ±5%
≈ 222
≈ 280
≈ 355
≈ 560
≈ 1690
≈ 2220
≈ 1250
≈ 1690
≈ 1420
315 ±5%
400 ±8%
630 ±±5%
1900 ±25%
2500 ±25%
1400 ±25%
1900 ±25%
1600 ±25%
3C91
3C92
3C94
3C96
≈ 0
E30/15/7-3C91
≈ 0
E30/15/7-3C92
≈ 0
E30/15/7-3C94
≈ 0
E30/15/7-3C96
2008 Sep 01
388
Ferroxcube
E cores and accessories
E30/15/7
AL
TOTAL AIR GAP
GRADE
(nH)
µe
TYPE NUMBER
(µm)
3F3
100 ±5%(1)
160 ±5%
≈ 89
≈142
≈ 1100
≈ 580
≈ 330
≈ 240
≈ 180
≈ 100
≈ 0
E30/15/7-3F3-E100
E30/15/7-3F3-A160
E30/15/7-3F3-A250
E30/15/7-3F3-A315
E30/15/7-3F3-A400
E30/15/7-3F3-A630
E30/15/7-3F3
250 ±5%
≈ 222
≈ 280
≈ 355
≈ 560
≈1420
≈1110
315 ±5%
400 ±8%
630 ±±5%
1600 ±25%
1250 ±25%
3F35
≈ 0
E30/15/7-3F35
Note
1. Measured in combination with an equal gapped core half, clamping force for AL measurements, 20 ±10 N.
Core halves of high permeability grades
Clamping force for AL measurements 20 ±10 N.
AL
(nH)
AIR GAP
(µm)
GRADE
µe
TYPE NUMBER
3C11
3E27
3300 ±25%
4100 ±25%
≈ 2930
≈ 3640
≈ 0
≈ 0
E30/15/7-3C11
E30/15/7-3E27
Properties of core sets under power conditions
B (mT) at
CORE LOSS (W) at
H = 250 A/m;
f = 25 kHz;
T = 100 °C
f = 25 kHz;
f = 100 kHz;
f = 100 kHz;
f = 400 kHz;
GRADE
ˆ
ˆ
ˆ
ˆ
= 200 mT;
= 100 mT;
= 200 mT;
= 50 mT;
B
B
B
B
T = 100 °C
T = 100 °C
T = 100 °C
T = 100 °C
3C81
≥320
≥330
≥320
≥370
≥330
≥340
≥320
≥300
≤ 0.82
−
≤ 0.48
≤ 0.27(1)
≤ 0.36
≤ 0.36
≤ 0.27
≤ 0.47
−
−
−
−
3C90
3C91
3C92
3C94
3C96
3F3
≤ 0.45
−
−
−
−
−
−
−
≤ 1.6(1)
≤ 2.0
≤ 2.0
≤ 1.6
−
−
−
−
−
≤ 0.80
−
3F35
−
Properties of core sets under power conditions (continued)
B (mT) at
CORE LOSS (W) at
H = 250 A/m;
f = 25 kHz;
T = 100 °C
f = 500 kHz;
f = 500 kHz;
f = 1 MHz;
f = 3 MHz;
GRADE
ˆ
ˆ
ˆ
ˆ
= 10 mT;
B
= 50 mT;
= 100 mT;
= 30 mT;
B
B
B
T = 100 °C
T = 100 °C
T = 100 °C
T = 100 °C
3C96
3F3
≥340
≥320
≥300
≤ 1.5
−
−
−
−
−
−
−
−
−
3F35
≤ 0.54
≤ 4.2
Note
1. Measured at 60 °C.
2008 Sep 01
389
Ferroxcube
E cores and accessories
E30/15/7
COIL FORMERS
GENERAL DATA FOR E30/15/7 COIL FORMER WITHOUT PINS
PARAMETER
SPECIFICATION
Coil former material
polyamide (PA6.6), glass reinforced, flame retardant in accordance with
“UL 94-HB”; UL file number E41613(M)
Maximum operating temperature 120 °C
20.1
max.
+0.1
0
0
−0.2
7.5
9
CBW033
17 min.
19
19.1 max.
Dimensions in mm.
Fig.2 E30/15/7 coil former.
WINDING DATA AND AREA PRODUCT FOR E30/15/7 COIL FORMER WITHOUT PINS (E)
MINIMUM
WINDING
WIDTH
AVERAGE
LENGTH OF
TURN
AREA
PRODUCT
Ae x Aw
(mm4)
WINDING
AREA
(mm2)
NUMBER OF
SECTIONS
TYPE NUMBER
(mm)
(mm)
1
80
17.0
56
4800
CP-E30/15/7-1S
2008 Sep 01
390
Ferroxcube
E cores and accessories
E30/15/7
GENERAL DATA FOR 10-PINS E30/15/7 COIL FORMER
PARAMETER
SPECIFICATION
Coil former material
phenolformaldehyde (PF), glass reinforced, flame retardant in accordance with
“UL 94V-0”; UL file number E167521(M)
Pin material
copper-tin alloy (CuSn), tin (Sn) plated
Maximum operating temperature 180 °C, “IEC 60085”, class H
Resistance to soldering heat
Solderability
“IEC 60068-2-20”, Part 2, Test Tb, method 1B: 350 °C, 3.5 s
“IEC 60068-2-20”, Part 2, Test Ta, method 1: 235 °C, 2 s
0
19
0
19
−0.3
−0.3
0
−0.2
9.3
(17.1 min.)
5.08
0
−0.1
+0.2
0
0.8
7.5
+0.2
0
0
−0.2
19
7.5
9.3
max. +0.1
2
0
3
29.1 max.
0.8 ±0.02
CBW034
24.1 max.
+0.15
1.3
0
Dimensions in mm.
Fig.3 E30/15/7 coil former; 10-pins.
WINDING DATA AND AREA PRODUCT FOR 10-PINS E30/15/7 COIL FORMER (E)
MINIMUM
WINDING
WIDTH
AVERAGE
LENGTH OF
TURN
AREA
PRODUCT
Ae x Aw
(mm4)
WINDING
AREA
(mm2)
NUMBER OF
NECTIONS
TYPE NUMBER
(mm)
(mm)
1
80
17.1
56
4800
CSH-E30/15/7-1S-10P
2008 Sep 01
391
Ferroxcube
E cores and accessories
E30/15/7
MOUNTING PARTS
General data and ordering information
ITEM
REMARKS
FIGURE
TYPE NUMBER
Clasp
CuZn alloy, Ni plated
stainless steel (CrNi)
4
5
CLA-E30/15/7
SPR-E30/15/7
Spring
10.5
3.9
0.8
7.6
min.
8.8 ±0.1
12.8
0
−0.1
0.6
7.5
2.2
2.5
2
2.9
32.2
±0.2
5
32
0.9
28
0
CBW036
3.3
0.65
−0.15
0.4 (2×)
CBW035
0.5
24
31.1 max.
Dimensions in mm.
Dimensions in mm.
Fig.4 E30/15/7 clasp.
Fig.5 E30/15/7 spring.
2008 Sep 01
392
Ferroxcube
E cores and accessories
E30/15/7
DATA SHEET STATUS DEFINITIONS
DATA SHEET
STATUS
PRODUCT
STATUS
DEFINITIONS
Preliminary
specification
Development This data sheet contains preliminary data. Ferroxcube reserves the right to
make changes at any time without notice in order to improve design and
supply the best possible product.
Product specification
Production
This data sheet contains final specifications. Ferroxcube reserves the right
to make changes at any time without notice in order to improve design and
supply the best possible product.
DISCLAIMER
Life support applications These products are not designed for use in life support appliances, devices, or systems
where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers
using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube
for any damages resulting from such application.
PRODUCT STATUS DEFINITIONS
STATUS
INDICATION
DEFINITION
These are products that have been made as development samples for the purposes of
technical evaluation only. The data for these types is provisional and is subject to
change.
Prototype
Design-in
Preferred
These products are recommended for new designs.
These products are recommended for use in current designs and are available via our
sales channels.
These products are not recommended for new designs and may not be available
through all of our sales channels. Customers are advised to check for availability.
Support
2008 Sep 01
393
相关型号：
©2020 ICPDF网 联系我们和版权申明