E65-3F3-E160 [FERROXCUBE]
E cores and accessories; E形磁芯及配件
| 型号： | E65-3F3-E160 |
| 厂家： | 
FERROXCUBE INTERNATIONAL HOLDING B.V. |
| 描述： | E cores and accessories |
| 文件： | 总6页 (文件大小：60K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
FERROXCUBE
DATA SHEET
E65/32/27
E cores and accessories
Supersedes data of September 2004
2008 Sep 01
Ferroxcube
E cores and accessories
E65/32/27
CORE SETS
Effective core parameters
+1.5
−1.2
+1.8
0
0
−0.7
65
44.2
20
handbook, halfpage
SYMBOL
PARAMETER
VALUE
UNIT
mm−1
Σ(I/A)
Ve
core factor (C1)
effective volume
effective length
effective area
0.274
79000
147
mm3
mm
mm2
mm2
g
Ie
+0.8
0
R ≤ 0.5
22.2
0
−0.6
Ae
540
32.8
Amin
m
minimum area
mass of core half
530
≈205
R3
0
−0.8
27.4
CBW073
Dimensions in mm.
Fig.1 E65/32/27 core half.
Core halves
AL measured in combination with a non-gapped core half, clamping force for AL measurements 60 ±20 N, unless stated
otherwise.
AL
(nH)
TOTAL AIR GAP
GRADE
3C90
µe
TYPE NUMBER
(µm)
100 ±5%(1)
160 ±5%(1)
250 ±5%(1)
315 ±5%(1)
400 ±8%(1)
630 ±±0%(1)
8600 ±25%
6000 ±25%
8600 ±25%
10600 ±25%
100 ±5%(1)
160 ±5%(1)
250 ±5%(1)
315 ±5%(1)
400 ±8%(1)
630 ±±0%(1)
7300 ±25%
≈ 22
≈ 35
≈ 14380
≈ 7560
≈ 4100
≈ 3020
≈ 2200
≈ 1240
≈ 0
E65/32/27-3C90-E100
E65/32/27-3C90-E160
E65/32/27-3C90-E250
E65/32/27-3C90-E315
E65/32/27-3C90-E400
E65/32/27-3C90-E630
E65/32/27-3C90
≈ 54
≈ 68
≈ 87
≈ 136
≈ 1860
≈ 1310
≈ 1860
≈ 2300
≈ 22
3C92
3C94
3C95
3F3
≈ 0
E65/32/27-3C92
≈ 0
E65/32/27-3C94
≈ 0
E65/32/27-3C95
≈ 14380
≈ 7560
≈ 4100
≈ 3020
≈ 2200
≈ 1240
≈ 0
E65/32/27-3F3-E100
E65/32/27-3F3-E160
E65/32/27-3F3-E250
E65/32/27-3F3-E315
E65/32/27-3F3-E400
E65/32/27-3F3-E630
E65/32/27-3F3
≈ 35
≈ 54
≈ 68
≈ 87
≈ 136
≈ 1580
Note
1. Measured in combination with an equal gapped core half.
2008 Sep 01
2
Ferroxcube
E cores and accessories
E65/32/27
Core halves of high permeability grades
Clamping force for AL measurements, 60 ±20 N.
AL
AIR GAP
(µm)
GRADE
(nH)
µe
≈ 3620
TYPE NUMBER
E65/32/27-3C11
3C11
16700 ±25%
≈ 0
Properties of core sets under power conditions
B (mT) at
CORE LOSS (W) at
H = 250 A/m;
f = 25 kHz;
T = 100 °C
f = 25 kHz;
f = 100 kHz;
= 100 mT;
B
T = 100 °C
f = 100 kHz;
= 200 mT;
B
T = 25 °C
f = 100 kHz;
= 200 mT;
B
T = 100 °C
f = 400 kHz;
GRADE
ˆ
ˆ
ˆ
ˆ
ˆ
= 200 mT;
= 50 mT;
B
B
T = 100 °C
T = 100 °C
3C90
≥320
≥370
≥320
≥320
≥320
≤ 9.1
≤ 12
≤ 8.5
≤ 8.5
−
−
−
≤ 47
≤ 47
≤ 47.4
−
−
−
3C92
3C94
3C95
3F3
−
−
−
−
−
−
≤ 49.8
−
−
−
≤ 10.5
≤ 21
2008 Sep 01
3
Ferroxcube
E cores and accessories
E65/32/27
COIL FORMER
General data for E65/32/27 coil former without pins
PARAMETER
SPECIFICATION
Coil former material
polyethylene terephtalate (PET), glass reinforced, flame retardant in accordance
with “UL 94V-0”; UL file number E107536
Maximum operating temperature
130 °C, “IEC 60085”, class B
3 ±0.1
(6×)
2 ±0.1
5 ±0.1
+0.2
0
0
−0.2
0
−0.3
27.7
30
53
23 ±0.1
1.2 ±0.1
CBW074
39.2 min.
+0.2
20.6
42 ±0.2
46 ±0.2
0
23.5 ±0.2
0
44
−0.3
Dimensions in mm.
Fig.2 E65/32/27 coil former.
Winding data and area product for E65/32/27 coil former without pins (E)
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
AVERAGE
LENGTH OF
TURN
AREA
NUMBER OF
SECTIONS
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
(mm)
(mm)
1
394
39.2
150
213000
CP-E65-1S-T
2008 Sep 01
4
Ferroxcube
E cores and accessories
E65/32/27
MOUNTING PARTS
General data for mounting parts
ITEM
REMARKS
FIGURE
TYPE NUMBER
Clasp
steel, zinc (Zn) plated
steel, zinc (Zn) plated
3
4
CLA-E65/32/27
SPR-E65/32/27
Spring
58.42 ±0.2
∅ 2.8
14
7
30
±0.3
35.56 ±0.2
14
42.8
27
4
11
52
0.9
MFW048
0.6
68.5
±0.3
5
76 ±0.4
Dimensions in mm.
Fig.3 E65/32/27 clasp.
7 ±1
27.5 ±0.2
0.8 min
55
±0.5
70.5
±0.2
66.1
±0.2
MFW049
4 ±0.3
Dimensions in mm.
Fig.4 E65/32/27 spring.
2008 Sep 01
5
Ferroxcube
E cores and accessories
E65/32/27
DATA SHEET STATUS DEFINITIONS
DATA SHEET
STATUS
PRODUCT
STATUS
DEFINITIONS
Preliminary
specification
Development This data sheet contains preliminary data. Ferroxcube reserves the right to
make changes at any time without notice in order to improve design and
supply the best possible product.
Product specification
Production
This data sheet contains final specifications. Ferroxcube reserves the right
to make changes at any time without notice in order to improve design and
supply the best possible product.
DISCLAIMER
Life support applications These products are not designed for use in life support appliances, devices, or systems
where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers
using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube
for any damages resulting from such application.
PRODUCT STATUS DEFINITIONS
STATUS
INDICATION
DEFINITION
These are products that have been made as development samples for the purposes of
technical evaluation only. The data for these types is provisional and is subject to
change.
Prototype
Design-in
Preferred
These products are recommended for new designs.
These products are recommended for use in current designs and are available via our
sales channels.
These products are not recommended for new designs and may not be available
through all of our sales channels. Customers are advised to check for availability.
Support
2008 Sep 01
6
相关型号：
©2020 ICPDF网 联系我们和版权申明