P22-3H3-A630 [FERROXCUBE]
P cores and accessories; P内核及配件
| 型号： | P22-3H3-A630 |
| 厂家： | 
FERROXCUBE INTERNATIONAL HOLDING B.V. |
| 描述： | P cores and accessories |
| 文件： | 总10页 (文件大小：99K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
FERROXCUBE
DATA SHEET
P22/13
P cores and accessories
Supersedes data of September 2004
2008 Sep 01
Ferroxcube
P cores and accessories
P22/13
CORE SETS
15 0.4
handbook, halfpage
Effective core parameters
SYMBOL
PARAMETER
VALUE UNIT
Σ(I/A)
Ve
core factor (C1)
effective volume
effective length
effective area
minimum area
mass of set
0.497
2000
31.5
63.4
50.9
≈ 12
mm−1
mm3
mm
mm2
mm2
g
0.6
0
0.3
0
0.8
17.9
0
9.4
22
Ie
3.8
0.6
Ae
Amin
m
0.3
0
O 4.4
0.2
0
0.5
0.4
0
13.4
0.2
9.2
2.7
0.15
MGC127
M2
Dimensions in mm.
Fig.1 P22/13 core set.
Core sets for filter applications
Clamping force for AL measurements, 140 30 N.
AL
(nH)
TOTAL AIR GAP
TYPE NUMBER
(WITH NUT)
TYPE NUMBER
(WITHOUT NUT)
GRADE
3D3
µe
(µm)
40 3%
63 3%
≈ 16
≈ 25
≈ 40
≈ 63
≈ 670
≈ 64
≈ 100
≈ 125
≈ 158
≈ 249
≈ 1540
≈ 3360
≈ 1890
≈ 1040
≈ 570
≈ 0
≈ 610
≈ 360
≈ 270
≈ 210
≈ 120
≈ 0
P22/13-3D3-E40/N
P22/13-3D3-E63/N
P22/13-3D3-E100/N
P22/13-3D3-E160/N
−
P22/13-3H3-E160/N
P22/13-3H3-E250/N
P22/13-3H3-E315/N
P22/13-3H3-A400/N
P22/13-3H3-A630/N
−
P22/13-3D3-E40
P22/13-3D3-E63
P22/13-3D3-E100
P22/13-3D3-E160
P22/13-3D3
P22/13-3H3-E160
P22/13-3H3-E250
P22/13-3H3-E315
P22/13-3H3-A400
P22/13-3H3-A630
P22/13-3H3
100 3%
160 3%
1700 25%
160 3%
250 3%
315 3%
400 3%
630 3%
3900 25%
3H3
2008 Sep 01
980
Ferroxcube
P cores and accessories
P22/13
Core sets for general purpose transformers and power applications
Clamping force for AL measurements, 140 30 N.
AL
(nH)
AIR GAP
(µm)
GRADE
3C81
µe
≈ 63
TYPE NUMBER
160 3%
250 3%
315 3%
400 3%
630 3%
5200 25%
5200 25%
160 3%
250 3%
315 3%
400 3%
630 3%
3550 25%
≈ 610
≈ 360
≈ 280
≈ 210
≈ 120
≈ 0
P22/13-3C81-A160
P22/13-3C81-A250
P22/13-3C81-A315
P22/13-3C81-A400
P22/13-3C81-A630
P22/13-3C81
≈ 99
≈ 125
≈ 158
≈ 249
≈ 2060
≈ 2060
≈ 63
3C91
3F3
≈ 0
P22/13-3C91
≈ 610
≈ 360
≈ 280
≈ 210
≈ 120
≈ 0
P22/13-3F3-A160
P22/13-3F3-A250
P22/13-3F3-A315
P22/13-3F3-A400
P22/13-3F3-A630
P22/13-3F3
≈ 99
≈ 125
≈ 158
≈ 249
≈ 1410
Core sets of high permeability grades
Clamping force for AL measurements, 140 30 N.
AL
(nH)
AIR GAP
(µm)
GRADE
µe
≈ 3660
TYPE NUMBER
3E27
9250 25%
≈ 0
P22/13-3E27
Properties of core sets under power conditions
B (mT) at
CORE LOSS (W) at
H = 250 A/m;
f = 25 kHz;
T = 100 °C
f = 25 kHz;
B = 200 mT;
T = 100 °C
f = 100 kHz;
B = 100 mT;
T = 100 °C
f = 100 kHz;
B = 200 mT;
T = 100 °C
f = 400 kHz;
B = 50 mT;
T = 100 °C
GRADE
ˆ
ˆ
ˆ
ˆ
3C81
≥320
≥315
≥315
≤ 0.46
−
−
≤ 0.9(1)
−
−
−
3C91
3F3
−
−
≤ 0.12(1)
≤ 0.22
≤ 0.4
Note
1. Measured at 60 °C.
2008 Sep 01
981
Ferroxcube
P cores and accessories
P22/13
INDUCTANCE ADJUSTERS
General data
handbook, halfpage
0.15
0
O 4.65
PARAMETER
Material of head
and thread
SPECIFICATION
polypropylene (PP),
glass fibre reinforced
Maximum operating
temperature
125 °C
10.4
3.85
M 2
3.7
min
0.8
MGC128
Dimensions in mm.
Fig.2 P22/13 inductance adjuster.
Inductance adjuster selection chart
(applies to all types)
AL
(nH)
TYPES FOR LOW
ADJUSTMENT
∆L/L TYPES FOR MEDIUM
∆L/L
TYPES FOR HIGH
ADJUSTMENT
∆L/L
GRADE
(1)
(1)
(1)
ADJUSTMENT
3H3
100 −
−
ADJ-P22/RM8-RED
16 ADJ-P22/RM8-ORANGE 21
160 ADJ-P22/RM8-RED
250 ADJ-P22/RM8-ORANGE 10 ADJ-P22/RM8-WHITE
11 ADJ-P22/RM8-ORANGE 17 ADJ-P22/RM8-WHITE
27
−
18
−
315 ADJ-P22/RM8-ORANGE
400 ADJ-P22/RM8-WHITE
630 ADJ-P22/RM8-BROWN
1000 ADJ-P22/RM8-BROWN
1250 ADJ-P22/RM8-BROWN
40 −
7
−
−
ADJ-P22/RM8-BROWN
22
30
−
11 ADJ-P22/RM8-BROWN
10 ADJ-P22/RM8-BLACK
17 ADJ-P22/RM8-BLACK
18
12
7
−
−
−
6
4
−
−
−
ADJ-P22/RM8-BLACK
−
ADJ-P22/RM8-BLACK
−
3D3
−
−
ADJ-P22/RM8-ORANGE 27
ADJ-P22/RM8-ORANGE 26
63 −
−
−
100 −
ADJ-P22/RM8-RED
16 ADJ-P22/RM8-ORANGE 23
160 ADJ-P22/RM8-RED
10 ADJ-P22/RM8-ORANGE 15
−
−
Note
1. Maximum adjustment range.
2008 Sep 01
982
Ferroxcube
P cores and accessories
P22/13
COIL FORMERS
General data CP-P22/13 coil former
PARAMETER
SPECIFICATION
Coil former material
polybutyleneterephtalate (PBT), glass reinforced, flame retardant in
accordance with “UL 94V-0”; UL file number E45329 (R)
Maximum operating temperature
155 °C, “IEC 60085”, class F
0
9.0
−0.15
0.5
0.4
0
0
−0.2
2.7
10.7
17.8
−0.15
CBW603
+0.15
0
9.6
0.5
0.6
Dimensions in mm.
Fig.3 Coil former: CP-P22/13.
Winding data and area product for CP-P22/13 coil former
MINIMUM
WINDING
AREA
NOMINAL
WINDING
WIDTH
AVERAGE
LENGTH OF
TURN
AREA
NUMBER OF
SECTIONS
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
(mm2)
(mm)
(mm)
1
2
3
26.2
7.5
44.5
44.5
44.5
1660
CP-P22/13-1S
CP-P22/13-2S
CP-P22/13-3S
2 × 12.2
3 × 7.6
2 × 3.45
3 × 2.1
2 x 773
3 x 482
2008 Sep 01
983
Ferroxcube
P cores and accessories
P22/13
General data 6-pins P22/13 coil former for PCB mounting
PARAMETER
SPECIFICATION
Coil former material
polyamide (PA6.6), glass reinforced, flame retardant in accordance with
“UL 94V-0”; UL file number E41938(M)
Maximum operating temperature
Pin material
130 °C, “IEC 60085”, class B
copper-zinc alloy (CuZn), tin (Sn) plated
Resistance to soldering heat
Solderability
“IEC 60068-2-20”, Part 2, Test Tb, method 1B, 350 °C, 3.5 s
“IEC 60068-2-20”, Part 2, Test Ta, method 1, 235 °C, 2 s
9 max
7.8
7.1
0.75
2.25
27.9 17.85 9.5
max max min
10.6
25
2.4
4.35
min
10.4 max
10.4 max
MGB624
Dimensions in mm.
Fig.4 P22/13 coil former for PCB mounting; 6-pins.
Winding data and area product for 6-pins P22/13 coil former for PCB mounting
MINIMUM
WINDING
AREA
NOMINAL
WINDING
WIDTH
AVERAGE
LENGTH OF LENGTH OF PRODUCT
MINIMUM
AREA
NUMBER
OF
SECTIONS
TYPE NUMBER
TURN
(mm)
PINS
(mm)
Ae x Aw
(mm4)
(mm2)
(mm)
1
1
2
2
3
3
25.2
7.8
44.5
44.5
44.5
44.5
44.5
44.5
4.4
6.8
4.4
6.8
4.4
6.8
1600
1600
CPV-P22/13-1S-6PD
CPV-P22/13-1S-6PDL
CPV-P22/13-2S-6PD
CPV-P22/13-2S-6PDL
CPV-P22/13-3S-6PD(1)
CPV-P22/13-3S-6PDL(1)
25.2
7.8
2 × 11.7
2 × 11.7
3 × 7.03
3 × 7.03
2 × 3.6
2 × 3.6
3 × 2.2
3 × 2.2
2 x 742
2 x 742
3 x446
3 x 446
Note
1. In accordance with “UL 94-HB”.
2008 Sep 01
984
Ferroxcube
P cores and accessories
P22/13
MOUNTING PARTS
General data and ordering information
ITEM
REMARKS
FIGURE
TYPE NUMBER
Tag plate
material: phenolformaldehyde (PF), glass reinforced
5
TGP-P22/13-C
flame retardant: in accordance with “UL 94V-0”;
UL file number E41429
maximum operating temperature: 180 °C, “IEC 60085”, class H
pins: copper-tin alloy (CuSn), tin (Sn) plated
resistance to soldering heat in accordance with
“IEC 60068-2-20”, Part 2, Test Tb, method 1B: 350 °C, 3.5 s
solderability in accordance with “IEC 60068-2-20”, Part 2,
Test Ta, method 1: 235 °C, 2 s
Container
Spring
copper-zinc alloy (CuZn), tin (Sn) plated
earth pins: presoldered
6
7
CON-P22/13
SPR-P22/13
CrNi-steel
spring force: ≈140 N when mounted
spring steel, tin-plated
Clamp
8
9
CLM/TS-P22/13
Washer
phenolformaldehyde (PF)
WAS-CLM/TS-P22/13
15
2.54
10.16
5.08
2.1
1.5
4.5
∅5.8
10.16 5.08
∅0.8
0.15
0
1.3
mark
23.2 max.
6
CBW604
Dimensions in mm.
Fig.5 Tag plate: TGP-P22/13-C.
2008 Sep 01
985
Ferroxcube
P cores and accessories
P22/13
10
a
8.2
mark
0.6
1
5
15.6 max.
20.2 min.
23.3 max.
8
CBW424
Dimensions in mm.
Fig.6 Container: CON-P22/13.
0.3
0
handbook, halfpage
1.4
20.5
max
MGC132
Dimensions in mm.
Fig.7 Spring: SPR-P22/13.
2008 Sep 01
986
Ferroxcube
P cores and accessories
P22/13
33
28
8
handbook, halfpage
handbook, halfpage
3.2 9.5
14
20
22
8.2
0.25
13.5
21
15.1
MBG175
MBE672
Dimensions in mm.
Dimensions in mm.
Fig.8 Clamp: CLM/S-P22/13.
Fig.9 Washer: WAS-CLM/TS-P22/13.
2008 Sep 01
987
Ferroxcube
P cores and accessories
P22/13
DATA SHEET STATUS DEFINITIONS
DATA SHEET
STATUS
PRODUCT
STATUS
DEFINITIONS
Preliminary
specification
Development This data sheet contains preliminary data. Ferroxcube reserves the right to
make changes at any time without notice in order to improve design and
supply the best possible product.
Product specification
Production
This data sheet contains final specifications. Ferroxcube reserves the right
to make changes at any time without notice in order to improve design and
supply the best possible product.
DISCLAIMER
Life support applications These products are not designed for use in life support appliances, devices, or systems
where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers
using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube
for any damages resulting from such application.
PRODUCT STATUS DEFINITIONS
STATUS
INDICATION
DEFINITION
These are products that have been made as development samples for the purposes of
technical evaluation only. The data for these types is provisional and is subject to
change.
Prototype
Design-in
Preferred
These products are recommended for new designs.
These products are recommended for use in current designs and are available via our
sales channels.
These products are not recommended for new designs and may not be available
through all of our sales channels. Customers are advised to check for availability.
Support
2008 Sep 01
988
相关型号：
©2020 ICPDF网 联系我们和版权申明