RM5-3C94-A160 [FERROXCUBE]
RM, RM/I, RM/ILP cores and accessories; RM , RM / I , RM / ILP内核及配件型号: | RM5-3C94-A160 |
厂家: | FERROXCUBE INTERNATIONAL HOLDING B.V. |
描述: | RM, RM/I, RM/ILP cores and accessories |
文件: | 总7页 (文件大小:75K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
FERROXCUBE
DATA SHEET
RM5/I
RM, RM/I, RM/ILP cores and
accessories
Supersedes data of September 2004
2008 Sep 01
Ferroxcube
RM, RM/I, RM/ILP cores and accessories
RM5/I
CORE SETS
Effective core parameters
handbook, halfpage
0
0.5
SYMBOL
PARAMETER
core factor (C1)
VALUE UNIT
12.3
Σ(I/A)
Ve
0.935
574
mm−1
mm3
mm
0
6.8
effective volume
effective length
effective area
minimum area
mass of set
2.5
0.4
Ie
23.2
24.8
18.1
≈ 3.2
Ae
mm2
mm2
g
6
14.9 max
Amin
m
0
0.2
O4.9
9.1
0.25
0.4 10.4
6.3
0
0.1
MGC050
0.4
0
O 10.2
Dimensions in mm.
Fig.1 RM5/I core set.
Core sets for general purpose
Clamping force for AL measurements, 12 5 N.
AL
AIR GAP
(µm)
GRADE
(nH)
µe
TYPE NUMBER
RM5/I-3C90-A63
3C90
63 3%
100 3%
160 3%
250 3%
315 5%
2000 25%
63 3%
≈ 47
≈ 74
≈ 680
≈ 380
≈ 220
≈ 130
≈ 100
≈ 0
RM5/I-3C90-A100
RM5/I-3C90-A160
RM5/I-3C90-A250
RM5/I-3C90-A315
RM5/I-3C90
≈ 119
≈ 186
≈ 234
≈ 1490
≈ 47
3C94
≈ 680
≈ 380
≈ 220
≈ 130
≈ 100
≈ 0
RM5/I-3C94-A63
RM5/I-3C94-A100
RM5/I-3C94-A160
RM5/I-3C94-A250
RM5/I-3C94-A315
RM5/I-3C94
100 3%
160 3%
250 3%
315 5%
2000 25%
2350 25%
1800 25%
63 3%
≈ 74
≈ 119
≈ 186
≈ 234
≈ 1490
≈ 1750
≈ 1340
≈ 47
3C95
3C96
3F3
≈ 0
RM5/I-3C95
≈ 0
RM5/I-3C96
≈ 680
≈ 380
≈ 220
≈ 130
≈ 100
≈ 0
RM5/I-3F3-A63
RM5/I-3F3-A100
RM5/I-3F3-A160
RM5/I-3F3-A250
RM5/I-3F3-A315
RM5/I-3F3
100 3%
160 3%
250 3%
315 5%
1700 25%
≈ 74
≈ 119
≈ 186
≈ 234
≈ 1270
2008 Sep 01
2
Ferroxcube
RM, RM/I, RM/ILP cores and accessories
RM5/I
AL
(nH)
AIR GAP
(µm)
GRADE
3F35
µe
TYPE NUMBER
RM5/I-3F35
1300 25%
100 3%
160 3%
250 3%
900 25%
900 25%
≈ 970
≈ 74
≈ 0
≈ 360
≈ 200
≈ 110
≈ 0
3F4
RM5/I-3F4-A100
RM5/I-3F4-A160
RM5/I-3F4-A250
RM5/I-3F4
≈ 119
≈ 186
≈ 670
≈ 670
3F45
≈ 0
RM5/I-3F45
Core sets of filter and high permeability grades
Clamping force for AL measurements, 12 5 N.
AL
AIR GAP
(µm)
GRADE
(nH)
µe
TYPE NUMBER
3B46
3E27
3E5
2800 25%
4975 25%
≈ 2080
≈ 3700
≈ 4990
≈ 6330
≈ 0
≈ 0
≈ 0
≈ 0
RM5/I-3B46
RM5/I-3E27
RM5/I-3E5
RM5/I-3E6
6700 +40/−30%
8500 +40/−30%
3E6
Properties of core sets under power conditions
B (mT) at
CORE LOSS (W) at
f = 100 kHz;
H = 250 A/m;
f = 25 kHz;
T = 100 °C
f = 25 kHz;
B = 200 mT;
T = 100 °C
f = 100 kHz;
B = 100 mT;
T = 100 °C
f = 100 kHz;
B = 200 mT;
f = 400 kHz;
B = 50 mT;
GRADE
ˆ
ˆ
ˆ
ˆ
ˆ
B = 200 mT;
T = 25 °C
T = 100 °C
T = 100 °C
3C90
≥320
≥320
≥320
≥340
≥315
≥300
≥250
≤ 0.07
≤ 0.08
≤ 0.06
−
−
−
≤ 0.32
≤ 0.3
≤ 0.24
−
−
−
3C94
3C95
3C96
3F3
−
−
−
−
−
−
−
≤ 0.32
−
≤ 0.04
≤ 0.08
−
−
−
−
−
≤ 0.11
≤0.11
≤ 0.06
−
3F35
3F4
−
−
−
Properties of core sets under power conditions (continued)
B (mT) at
CORE LOSS (W) at
f = 1 MHz;
H = 250 A/m;
f = 25 kHz;
T = 100 °C
f = 500 kHz;
B = 50 mT;
T = 100 °C
f = 500 kHz;
B = 100 mT;
T = 100 °C
f = 1 MHz;
B = 50 mT;
f = 3 MHz;
B =10 mT;
GRADE
ˆ
ˆ
ˆ
ˆ
ˆ
B = 30 mT;
T = 100 °C
T = 100 °C
T = 100 °C
3C90
≥320
≥320
≥320
≥340
≥315
≥300
≥250
≥250
−
−
−
−
−
3C94
3C95
3C96
3F3
−
−
−
−
−
−
−
−
−
−
≤ 0.22
−
−
−
−
−
−
−
−
−
3F35
3F4
≤ 0.08
≤ 0.7
−
−
−
−
−
−
−
≤ 0.17
≤ 0.13
≤ 0.27
≤ 0.23
3F45
−
≤ 0.48
2008 Sep 01
3
Ferroxcube
RM, RM/I, RM/ILP cores and accessories
RM5/I
COIL FORMERS
General data SMD coil former
PARAMETER
SPECIFICATION
Coil former material
phenolformaldehyde (PF), glass-reinforced, flame retardant in accordance with
“UL 94V-0”; UL file number E41429 (M)
Solder pad material
copper-clad steel, tin (Sn) plated
Maximum operating temperature 155 °C, “IEC 60085”, class F
Resistance to soldering heat
Solderability
“IEC 60068-2-20”, Part 2, Test Tb, method 1B, 350 °C, 3.5 s
“IEC 60068-2-20”, Part 2, Test Ta, method 1
0
∅ 10.1
−0.15
2
0
∅ 5.9
−0.1
+0.1
0.45
4.7
min.
∅ 5
0
2.8
0
−0.1
0.9
6.1
2
11.2
8.65 max.
1
1.8
0.3
14.9 max.
3.75
CBW512
3.75
11.25
14.15 max.
Dimensions in mm.
Fig.2 SMD coil former for RM5/I.
Winding data and area product for RM5/I coil former (SMD)
AVERAGE
LENGTH OF
TURN
AREA
NUMBER OF
SOLDER
PADS
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
NUMBER OF
SECTIONS
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
(mm)
1
8
9.5
4.7
24.9
236
CSVS-RM5-1S-8P
2008 Sep 01
4
Ferroxcube
RM, RM/I, RM/ILP cores and accessories
RM5/I
Additional coil formers are those of “RM5”, but “area product” is different.
Winding data and area product (for RM5/I) for 4-pins RM5 coil former
AVERAGE
LENGTH
OF TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
NUMBER
OF
SECTIONS
NUMBER
OF
PINS
PIN
POSITIONS
USED
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
TYPE NUMBER
1
2
4
4
all
all
9.5
4.8
25
25
236
CSV-RM5-1S-4P
CSV-RM5-2S-4P
2 × 4.35
2 × 2.2
2 x 108
Winding data and area product (for RM5/I) for 6-pins RM5 coil former
AVERAGE
AREA
PRODUCT
Ae x Aw
(mm4)
NUMBER
OF
NUMBER
OF
PIN
POSITIONS
USED
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
LENGTH
OF
TYPE NUMBER
SECTIONS
PINS
TURN
(mm)
1
1
1
2
2
6
5
4
6
5
all
9.2
9.2
4.68
4.68
24.9
24.9
24.9
24.9
24.9
228
228
CSV-RM5-1S-6P-G()
CSV-RM5-1S-5P-G()
CSV-RM5-1S-4P-G()
CSV-RM5-2S-6P-G()
CSV-RM5-2S-5P-G()
1, 2, 3, 5, 6
2, 3, 5, 6
all
9.2
4.68
228
2 × 4.15
2 × 4.15
2 × 2.06
2 × 2.06
2 x 103
2 x 103
1, 2, 3, 5, 6
Note
Also available with post-inserted pins.
2008 Sep 01
5
Ferroxcube
RM, RM/I, RM/ILP cores and accessories
RM5/I
MOUNTING PARTS
General data mounting clip with earth pin
2.1
handbook, halfpage
ITEM
SPECIFICATION
Clamping force
Clip material
Clip plating
≈6 N
stainless steel (CrNi)
tin (Sn)
Solderability
‘‘IEC 60068-2-20’’,
Part 2, Test Ta, method 1
9.8
8.2
R22
Type number
CLI/P-RM4/5/I
4.3
0.7
CBW361
Dimensions in mm.
Fig.3 Mounting clip with earth pin for RM5/I.
General data mounting clip without earth pin
ITEM
SPECIFICATION
Clamping force
Clip material
Type number
≈5 N
stainless steel (CrNi)
CLI-RM4/5/I
handbook, halfpage
2.1
8.2
9.8
R22
CBW124
Dimensions in mm.
Fig.4 Mounting clip without earth pin for RM5/I.
2008 Sep 01
6
Ferroxcube
RM, RM/I, RM/ILP cores and accessories
RM5/I
DATA SHEET STATUS DEFINITIONS
DATA SHEET
STATUS
PRODUCT
STATUS
DEFINITIONS
Preliminary
specification
Development This data sheet contains preliminary data. Ferroxcube reserves the right to
make changes at any time without notice in order to improve design and
supply the best possible product.
Product specification
Production
This data sheet contains final specifications. Ferroxcube reserves the right
to make changes at any time without notice in order to improve design and
supply the best possible product.
DISCLAIMER
Life support applications These products are not designed for use in life support appliances, devices, or systems
where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers
using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube
for any damages resulting from such application.
PRODUCT STATUS DEFINITIONS
STATUS
INDICATION
DEFINITION
These are products that have been made as development samples for the purposes of
technical evaluation only. The data for these types is provisional and is subject to
change.
Prototype
Design-in
Preferred
These products are recommended for new designs.
These products are recommended for use in current designs and are available via our
sales channels.
These products are not recommended for new designs and may not be available
through all of our sales channels. Customers are advised to check for availability.
Support
2008 Sep 01
7
相关型号:
©2020 ICPDF网 联系我们和版权申明