CMS4-11-3-8.9-4S2 [FERYSTER]
SMD common mode chokes; SMD共模扼流圈型号: | CMS4-11-3-8.9-4S2 |
厂家: | FERYSTER INDUCTIVE COMPONENTS MANUFACTURER |
描述: | SMD common mode chokes |
文件: | 总9页 (文件大小:68K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
FERROXCUBE
DATAA SHEET
SMD common mode chokes
EMI-suppression products
Supersedes data of February 2002
2004 Sep 01
Ferroxcube
EMI-suppression products
SMD common mode chokes
SMD COMMON MODE CHOKES FOR
EMI-SUPPRESSION
(1)
|Ztyp
|
at f
(MHz)
GRADE
TYPE NUMBER
(Ω)
General data
CMS4-11/3/4.8; mass ≈0.6 g
ITEM
Strip
material
SPECIFICATION
4S2
inner
channel
12
23
42
15
30
50
25 CMS4-11/3/4.8-4S2
100
copper (Cu), tin-lead (SnPb) plated,
lead-free (Sn) available on request.
300
25
Solderability “IEC 60068-2-58”, Part 2, Test Ta,
method 1
4S2
outer
channel
100
300
Taping
method
“IEC 60286-3” , “EIA 481-1-A” and
“EIA 481-2”
CMS4-11/3/8.9; mass ≈1.1 g
Grades, parameters and type numbers
4S2
inner
channel
23
45
82
27
58
97
25 CMS4-11/3/8.9-4S2
100
(1)
|Ztyp
|
at f
GRADE
TYPE NUMBER
(Ω)
(MHz)
300
25
4S2
outer
channel
CMS2-5.6/3/4.8; mass ≈0.3 g
100
300
4S2
21
35
50
25 CMS2-5.6/3/4.8-4S2
100
300
Note
1. Typical values, Z
is 20%.
−
CMS2-5.6/3/8.9; mass ≈0.6 g
min
DC resistance <0.6 mΩ.
4S2
38
60
25 CMS2-5.6/3/8.9-4S2
100
Mechanical data
1.27
±0.07
8.9 −0.5
>5
4.75 ±0.3
>1.1
1.33
±0.2
>1.2
>1.2
handbook, halfpage
handbook, halfpage
3.04
3.04
max.
max.
CBW180
0.2
0.2
5.6 ±0.2
a. CMS2-5.6/3/8.9 (side view).
b. CMS2-5.6/3/4.8 (side view).
Front view (a and b).
Dimensions in mm.
Fig.1 CMS2-5.6/3/4.8 and CMS2-5.6/3/8.9.
2004 Sep 01
2
Ferroxcube
EMI-suppression products
SMD common mode chokes
8.9 −0.5
4.75 ±0.3
>1.1
1.27
±0.07
1.33
±0.2
>1.2
>5
>1.2
handbook, halfpage
handbook, full pagewit
3.04
3.04
max.
max.
10.8 ±0.3
0.2
CBW181
0.2
a. CMS4-11/3/8.9 (side view).
b. CMS4-11/3/4.8 (side view).
Front view (a and b).
Dimensions in mm.
Fig.2 CMS4-11/3/4.8 and CMS4-11/3/8.9.
Recommended dimensions of solder lands
6.4
6.4
2.0
0.8
handbook, halfpage
handbook, halfpage
1.8
2.8
1.8
1.9
1.9
2.5
2.5
MBG063
MBG064
Dimensions in mm.
Dimensions of solder lands are based on a solder paste layer
thickness of approximately 200 µm (≈0.7 mg solder paste per mm2).
Dimensions in mm.
Fig.3 Solder lands for reflow soldering of
CMS2-5.6/3/4.8.
Fig.4 Solder lands for wave
soldering of CMS2-5.6/3/4.8.
2004 Sep 01
3
Ferroxcube
EMI-suppression products
SMD common mode chokes
10.8
10.8
1.8
6.0
2.5
1.8
7.0
handbook, halfpage
1.9
handbook, halfpage
1.9
2.5
2.5
CBW291
CBW292
Dimensions in mm.
Dimensions of solder lands are based on a solder paste layer
thickness of approximately 200 µm (≈0.7 mg solder paste per mm2).
Dimensions in mm.
Fig.5 Solder lands for reflow soldering of
CMS2-5.6/3/8.9.
Fig.6 Solder lands for wave
soldering of CMS2-5.6/3/8.9.
6.4
6.4
handbook, halfpage
handbook, halfpage
1.8
2.8
1.8
2.0
0.8
1.9
1.9
2.5
2.5
MBG065
MBG066
Dimensions in mm.
Dimensions of solder lands are based on a solder paste layer
thickness of approximately 200 µm (≈0.7 mg solder paste per mm2).
Dimensions in mm.
Fig.7 Solder lands for reflow soldering of
CMS4-11/3/4.8.
Fig.8 Solder lands for wave
soldering of CMS4-11/3/4.8.
2004 Sep 01
4
Ferroxcube
EMI-suppression products
SMD common mode chokes
10.8
1.8
6.0
2.5
10.8
1.8
7.0
handbook, halfpage
handbook, halfpage
1.9
1.9
2.5
2.5
CBW290
CBW289
Dimensions in mm.
Dimensions of solder lands are based on a solder paste layer
thickness of approximately 200 µm (≈0.7 mg solder paste per mm2).
Dimensions in mm.
Fig.9 Solder lands for reflow soldering of
CMS4-11/3/8.9.
Fig.10 Solder lands for wave
soldering of CMS4-11/3/8.9.
2004 Sep 01
5
Ferroxcube
EMI-suppression products
SMD common mode chokes
Soldering profiles
300
MLA859
10 s
T
(°C)
260 °C
245 °C
250
200
150
100
50
10 s
40 s
215 °C
180 °C
130 °C
2 K/s
0
0
50
100
150
200
250
t (s)
Typical values (solid line).
Process limits (dotted lines).
Fig.11 Reflow soldering.
300
250
200
150
100
50
10 s
T
(°C)
MLA861
235 °C to 260 °C
second wave
5 K/s
2 K/s
first wave
200 K/s
100 °C to 130 °C
forced
cooling
2 K/s
0
0
50
100
150
200
250
t (s)
Typical values (solid line).
Process limits (dotted lines).
Fig.12 Double wave soldering.
2004 Sep 01
6
Ferroxcube
EMI-suppression products
SMD common mode chokes
BLISTER TAPE AND REEL DIMENSIONS
K
0
P
0
D
P
T
2
0
E
F
cover tape
W
B
0
MEA613 - 1
A
D
0
1
P
1
direction of unreeling
For dimensions see Table 1.
Fig.13 Blister tape.
Table 1 Physical dimensions of blister tape; see Fig.13
DIMENSIONS (mm)
CMS2-5.6/3/8.9 CMS2-5.6/3/8.9
SIZE
CMS2-5.6/3/4.8
CMS4-11/3/8.9
A0
B0
K0
T
5.26
6.07
3.18
0.3
5.99
9.09
3.18
0.33
16
5.23
11.18
4.5
10.13
11.56
4.5
0.34
24
0.36
24
W
E
12
1.75
5.5
1.75
7.5
1.75
11.75
1.5
1.75
11.5
1.5
F
D0
D1
P0
P1
P2
1.5
1.5
≥1.5
4.0
≥1.5
4.0
≥1.5
4.0
≥1.5
4.0
8.0
8.0
8.0
16.0
2.0
2.0
2.0
2.0
2004 Sep 01
7
Ferroxcube
EMI-suppression products
SMD common mode chokes
W
2
0.15
0
20.5
12.75
N
A
MSA284
W
1
Dimensions in mm.
For dimensions see Table 2.
Fig.14 Reel.
Table 2 Reel dimensions; see Fig.14
DIMENSIONS (mm)
SIZE
A
N
W1
W2
12
16
24
330
330
330
100 ±5
100 ±5
100 ±5
12.4
16.4
24.4
≤16.4
≤20.4
≤28.4
2004 Sep 01
8
Ferroxcube
EMI-suppression products
SMD common mode chokes
DATA SHEET STATUS DEFINITIONS
DATA SHEET
STATUS
PRODUCT
STATUS
DEFINITIONS
Preliminary
specification
Development This data sheet contains preliminary data. Ferroxcube reserves the right to
make changes at any time without notice in order to improve design and
supply the best possible product.
Product specification
Production
This data sheet contains final specifications. Ferroxcube reserves the right
to make changes at any time without notice in order to improve design and
supply the best possible product.
DISCLAIMER
Life support applications
These products are not designed for use in life support appliances, devices, or systems
where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers
using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube
for any damages resulting from such application.
PRODUCT STATUS DEFINITIONS
STATUS
INDICATION
DEFINITION
These are products that have been made as development samples for the purposes of
technical evaluation only. The data for these types is provisional and is subject to
change.
Prototype
Design-in
Preferred
These products are recommended for new designs.
These products are recommended for use in current designs and are available via our
sales channels.
These products are not recommended for new designs and may not be available
through all of our sales channels. Customers are advised to check for availability.
Support
2004 Sep 01
9
相关型号:
©2020 ICPDF网 联系我们和版权申明