E64/10/50-3C90 [FERYSTER]
Planar E cores and accessories; 平面E型磁芯及配件型号: | E64/10/50-3C90 |
厂家: | FERYSTER INDUCTIVE COMPONENTS MANUFACTURER |
描述: | Planar E cores and accessories |
文件: | 总6页 (文件大小:38K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
FERROXCUBE
DATAA SHEET
E64/10/50
Planar E cores and accessories
Supersedes data of February 2002
2004 Sep 01
Ferroxcube
Planar E cores and accessories
E64/10/50
CORES
Effective core parameters of a set of E cores
64.0 ±1.3
53.8 ±1.1
handbook, halfpage
SYMBOL
PARAMETER
core factor (C1)
VALUE UNIT
0.156
mm−1
40700 mm3
10.2
±0.2
Σ(I/A)
Ve
effective volume
effective length
effective area
5.1 ±0.13
10.2
±0.13
Ie
79.9
519
mm
mm2
mm2
g
Ae
R0.25 max. typ.
Amin
m
minimum area
mass of core half
519
≈ 100
50.8 ±1
CBW415
R0.64 ref. typ.
R0.81 ref. typ.
Dimensions in mm.
Fig.1 E64/10/50.
Effective core parameters of an E/PLT combination
SYMBOL
PARAMETER
core factor (C1)
VALUE UNIT
0.136
mm−1
35500 mm3
Σ(I/A)
Ve
handbook, halfpage
63.8 ±1.3
effective volume
effective length
effective area
minimum area
mass of plate
5.08 ±0.13
Ie
69.7
519
519
≈ 78
mm
mm2
mm2
g
Ae
Amin
m
Ordering information for plates
GRADE TYPE NUMBER
3C90 PLT64/50/5-3C90
50.3 ±1
3C92
3C93
3C94
3F3
PLT64/50/5-3C92
PLT64/50/5-3C93
PLT64/50/5-3C94
PLT64/50/5-3F3
PLT64/50/5-3F4
CBW416
R0.64 ref. typ.
3F4
Dimensions in mm.
Fig.2 PLT 64/50/5.
2004 Sep 01
2
Ferroxcube
Planar E cores and accessories
E64/10/50
Core halves for use in combination with an E core
AL measured in combination with a non-gapped core half, clamping force for AL measurements, 100 ±30 N,
unless stated otherwise.
AL
(nH)
AIR GAP
(µm)
GRADE
3C90
µe
≈ 78
TYPE NUMBER
630 ±3%(1)
1000 ±3%(1)
1600 ±5%
≈ 1100
E64/10/50-3C90-E630-E
E64/10/50-3C90-E1000-E
E64/10/50-3C90-A1600-E
E64/10/50-3C90-A2500-E
E64/10/50-3C90-A3150-E
E64/10/50-3C90
≈ 124
≈ 199
≈ 310
≈ 391
≈ 1820
≈ 1390
≈ 1650
≈ 78
≈ 660
≈ 385
≈ 225
≈ 170
≈ 0
2500 ±10%
3150 ±10%
14640 ±25%
11200 ±25%
13300 ±25%
630 ±3%(1)
1000 ±3%(1)
1600 ±5%
3C92
3C93
3C94
≈ 0
E64/10/50-3C92
≈ 0
E64/10/50-3C93
≈ 1100
≈ 660
≈ 385
≈ 225
≈ 170
≈ 0
E64/10/50-3C94-E630-E
E64/10/50-3C94-E1000-E
E64/10/50-3C94-A1600-E
E64/10/50-3C94-A2500-E
E64/10/50-3C94-A3150-E
E64/10/50-3C94
≈ 124
≈ 199
≈ 310
≈ 391
≈ 1820
≈ 78
2500 ±10%
3150 ±10%
14640 ±25%
630 ±3%(1)
1000 ±3%(1)
1600 ±5%
3F3
3F4
≈ 1100
≈ 660
≈ 385
≈ 225
≈ 170
≈ 0
E64/10/50-3F3-E630-E
E64/10/50-3F3-E1000-E
E64/10/50-3F3-A1600-E
E64/10/50-3F3-A2500-E
E64/10/50-3F3-A3150-E
E64/10/50-3F3
≈ 124
≈ 199
≈ 310
≈ 391
≈ 1650
≈ 78
2500 ±10%
3150 ±10%
13300 ±25%
630 ±3%(1)
1000 ±3%(1)
1600 ±5%
≈ 1100
≈ 660
≈ 385
≈ 225
≈ 170
≈ 0
E64/10/50-3F4-E630-E
E64/10/50-3F4-E1000-E
E64/10/50-3F4-A1600-E
E64/10/50-3F4-A2500-E
E64/10/50-3F4-A3150-E
E64/10/50-3F4
≈ 124
≈ 199
≈ 310
≈ 391
≈ 860
2500 ±10%
3150 ±10%
6960 ±25%
Note
1. Measured in combination with an equal-gapped core half, clamping force for AL measurements, 100 ±30 N.
2004 Sep 01
3
Ferroxcube
Planar E cores and accessories
E64/10/50
Core halves for use in combination with a plate (PLT)
AL measured in combination with a plate (PLT), clamping force for AL measurements, 100 ±30 N.
AL
(nH)
AIR GAP
(µm)
GRADE
3C90
µe
TYPE NUMBER
630 ±3%
1000 ±3%
1600 ±5%
2500 ±10%
3150 ±10%
16540 ±25%
12700 ±25%
15050 ±25%
630 ±3%
≈ 78
≈ 124
≈ 199
≈ 310
≈ 391
≈ 1790
≈ 1100
≈ 660
≈ 385
≈ 225
≈ 170
≈ 0
E64/10/50-3C90-A-630-P
E64/10/50-3C90-A-1000-P
E64/10/50-3C90-A-1600-P
E64/10/50-3C90-A-2500-P
E64/10/50-3C90-A-3150-P
E64/10/50-3C90
3C92
3C93
3C94
≈ 1370
≈ 1630
≈ 78
≈ 0
E64/10/50-3C92
≈ 0
E64/10/50-3C93
≈ 1100
≈ 660
≈ 385
≈ 225
≈ 170
≈ 0
E64/10/50-3C94-A-630-P
E64/10/50-3C94-A-1000-P
E64/10/50-3C94-A-1600-P
E64/10/50-3C94-A-2500-P
E64/10/50-3C94-A-3150-P
E64/10/50-3C94
1000 ±3%
1600 ±5%
2500 ±10%
3150 ±10%
16540 ±25%
630 ±3%
≈ 124
≈ 199
≈ 310
≈ 391
≈ 1790
≈ 78
3F3
3F4
≈ 1100
≈ 660
≈ 385
≈ 225
≈ 170
≈ 0
E64/10/50-3F3-A-630-P
E64/10/50-3F3-A-1000-P
E64/10/50-3F3-A-1600-P
E64/10/50-3F3-A-2500-P
E64/10/50-3F3-A-3150-P
E64/10/50-3F3
1000 ±3%
1600 ±5%
2500 ±10%
3150 ±10%
15050 ±25%
630 ±3%
≈ 124
≈ 199
≈ 310
≈ 391
≈ 1630
≈ 78
≈ 1100
≈ 660
≈ 385
≈ 225
≈ 170
≈ 0
E64/10/50-3F4-A-630-P
E64/10/50-3F4-A-1000-P
E64/10/50-3F4-A-1600-P
E64/10/50-3F4-A-2500-P
E64/10/50-3F4-A-3150-P
E64/10/50-3F4
1000 ±3%
1600 ±5%
2500 ±10%
3150 ±10%
7920 ±25%
≈ 124
≈ 199
≈ 310
≈ 391
≈ 860
2004 Sep 01
4
Ferroxcube
Planar E cores and accessories
E64/10/50
Properties of core sets under power conditions
B (mT) at
CORE LOSS (W) at
H = 250 A/m;
f = 10 kHz;
T = 100 °C
f = 100 kHz;
f = 100 kHz;
f = 400 kHz;
GRADE
ˆ
ˆ
ˆ
= 100 mT;
= 200 mT;
= 50 mT;
B
B
B
T = 100 °C
T = 100 °C
T = 100 °C
E+E64-3C90
E+PLT64-3C90
E+E64-3C92
E+PLT64-3C92
E+E64-3C93
E+PLT64-3C93
E+E64-3C94
E+PLT64-3C94
E+E64-3F3
≥320
≥320
≥370
≥370
≥320
≥320
≥320
≥320
≥300
≥300
≥250
≥250
≤ 4.8
≤ 4.2
≤ 3.6
≤ 3.2
≤ 3.6(1)
≤ 3.2(1)
≤ 3.6
≤ 3.2
≤ 4.8
≤ 4.2
−
−
−
−
−
≤ 25
≤ 23
≤ 25(1)
≤ 23(1)
≤ 25
≤ 23
−
−
−
−
−
−
−
≤ 7.8
≤ 6.8
−
E+PLT64-3F3
E+E64-3F4
−
−
E+PLT64-3F4
−
−
−
1. Measured at 140 °C.
Properties of core sets under power conditions (continued)
B (mT) at
CORE LOSS (W) at
H = 250 A/m;
f = 10 kHz;
T = 100 °C
f = 500 kHz;
f = 500 kHz;
= 100 mT;
B
T = 100 °C
f = 1 MHz;
f = 3 MHz;
ˆ
= 10 mT;
B
T = 100 °C
GRADE
ˆ
ˆ
ˆ
= 50 mT;
= 30 mT;
B
B
T = 100 °C
T = 100 °C
E+E64-3C90
E+PLT64-3C90
E+E64-3C92
E+PLT64-3C92
E+E64-3C93
E+PLT64-3C93
E+E64-3C94
E+PLT64-3C94
E+E64-3F3
≥320
≥320
≥370
≥370
≥320
≥320
≥320
≥320
≥300
≥300
≥250
≥250
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
E+PLT64-3F3
E+E64-3F4
−
−
≤ 12
≤ 10.5
≤ 20
≤ 17
E+PLT64-3F4
2004 Sep 01
5
Ferroxcube
Planar E cores and accessories
E64/10/50
DATA SHEET STATUS DEFINITIONS
DATA SHEET
STATUS
PRODUCT
STATUS
DEFINITIONS
Preliminary
specification
Development This data sheet contains preliminary data. Ferroxcube reserves the right to
make changes at any time without notice in order to improve design and
supply the best possible product.
Product specification
Production
This data sheet contains final specifications. Ferroxcube reserves the right
to make changes at any time without notice in order to improve design and
supply the best possible product.
DISCLAIMER
Life support applications
These products are not designed for use in life support appliances, devices, or systems
where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers
using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube
for any damages resulting from such application.
PRODUCT STATUS DEFINITIONS
STATUS
INDICATION
DEFINITION
These are products that have been made as development samples for the purposes of
technical evaluation only. The data for these types is provisional and is subject to
change.
Prototype
Design-in
Preferred
These products are recommended for new designs.
These products are recommended for use in current designs and are available via our
sales channels.
These products are not recommended for new designs and may not be available
through all of our sales channels. Customers are advised to check for availability.
Support
2004 Sep 01
6
相关型号:
©2020 ICPDF网 联系我们和版权申明