FYLP-3W-UBS-A [FORYARD]
High Power Led lamp;型号: | FYLP-3W-UBS-A |
厂家: | NINGBO FORYARD OPTOELECTRONICS CO., LTD. |
描述: | High Power Led lamp |
文件: | 总7页 (文件大小:392K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
FYLP-1W-UWS-A
A
Model. No.
Rev.
PRODUCT SPECIFICATION
Model No.:FYLP-1W-UWS-A
Features:
■High-Power LED Type
■Size (mm):Φ5.6*8.5 concave
■Emitting Color:White
■SMT package
■RoHS Compliant
Applications:
■Decorative lighting
■Architectural lighting
■Interior automotive
■Illuminations
CUSTOMER APPROVED
APPROVED BY
CHECKED BY
PREPARED BY
SIGNATURES
NINGBO FORYARD OPTOELECTRONICS CO.,LTD
Add:NO.115 Qixin Road Ningbo Zhejiang China
Tel: 0086-574-87933652 87927870 87922206
Fax: 0086-574-87927917
Zip:315051
E-mail:Sales@foryard.com ( General)
Http://www.foryard.com
Http://www.foryard.com
1/7
Page:
FYLP-1W-UWS-A
A
Model. No.
Rev.
Model No.:FYLP-1W-UWS-A
■ Mechanical Dimensions
Notes:
1. Dimension in millimeter, tolerance is ±0.2mm.
3.The specifications,characteristics and technical data described in the datasheet are subject to change without prior notice.
Http://www.foryard.com
2/7
Page:
FYLP-1W-UWS-A
A
Model. No.
Rev.
Model No.:FYLP-1W-UWS-A
■ Absolute Maximun Ratings(Ta=25ºC)
Items
Symbol
IF
Absolute maximum Rating
Unit
mA
mA
Mw
Forward Current(DC)
Peak Forward Current*
Power Dissipation
350
500
IFP
PD
1000
Operation Temperature
Storage Temperature
Reverse Voltage
Topr
Tstg
VR
-40ºC+85ºC
℃
℃
V
-40ºC+100ºC
5
Soldering Temperature
Tsol
Hand Soldering:250℃/10sec
*Pulse width≦1msec duty≦1/10
■ Typical Electrical &Optical Charcteristics(Ta=25ºC)
Items
Symbol
VF
Condition
IF =350mA
VR = 5V
Max
3.6
5
Unit
V
Min.
2.8
Typ.
---
Forward Voltage
Reverse Current
Chromatic Coordinates
Color Temperature
Luminous Flux
IR
uA
---
(X,Y)
CCT
ΦV
IF =350mA
IF =350mA
IF =350mA
IF =350mA
---
---
5000
---
(0.34,0.38)
6000
---
K
---
90
LM
Deg
50% Power Angle
2θ½
---
---
120
■ Material
Item
Reflector
PPA
Wire
Gold
Encapsulate
Silicone
Chip
InGaN
Material
Note:
1.Luminous Intensity is based on the Foryard standards.
2.Pay attention about static for InGaN
Http://www.foryard.com
3/7
Page:
FYLP-1W-UWS-A
A
Model. No.
Rev.
Model No.:FYLP-1W-UWS-A
■ Typical Eletrical/Optical Characteristics Curves(Ta=25ºC Unless Otherwise Noted)
InGaNA/2lO
3
Radiation pattern.
R elativ e Lmu ionosu Intesn ity OL P @m ax=1)
Http://www.foryard.com
4/7
Page:
FYLP-1W-UWS-A
A
Model. No.
Rev.
Model No.:FYLP-1W-UWS-A
■ Packing Diagram
FORYARD
RoHS
Part NO: FYLP-XXXXXX
PASS
QC:
QC
xxxxxxxxxx
xxxx/xx/xx
OUTSIDE LABEL
FORYARD
O
P T O E L E C T R O N I C S
www.foryard.com
10 Reels /Box
6 Boxes/Carton
FORYARD
O
P T O E L E C T R O N I C S
LED
PN:FYLS-xxxxxxxx-xx
Qty:XXXXX PCS
Date:xxxx/xx/xx
PASS
GW: xx
NW: xx
KG QC: QC
KG
RoHS
ATTENTION
xxxxxxxxxx
OUTSIDE LABEL
Note: The specifications are subject to change without notice. Please contact us for updated information.
Http://www.foryard.com
5/7
Page:
FYLP-1W-UWS-A
A
Model. No.
Rev.
Model No.:FYLP-1W-UWS-A
■ Precautions for use:
1. Storage
To prevent moisture absorption into High-power LEDs during the transportation and storage , the LEDs are pack
in a moisture-barrier bag. Desiccants and a humidity indicator are packed together with the LEDs as
secondary protection
The shelf life of LEDs stored in the original sealed bag at <40℃ and < 90% RH is 12 months. Baking is
required if the shelf life has expired
Before opening the packaging , check for air leaks in the bag.
After the bag is opened, the High-power LEDs must be stored at <30℃ and < 60% RH. Under these conditions,
High-power LEDs must be used within 24 hours. If the LEDs are not within 24 hours after removal from the bag
baking is required Take the material out of the packaging bag before baking. Do not open the oven door
frequently during the baking process.
2. Soldering
(1) Manual soldering with a soldering Iron
Use a soldering iron of less than 25 watts is recommended . The iron temperature must be kept below 315℃
And soldering time no more than 2 seconds.
The epoxy resin of an High-power LED should not contact the tip of the soldering iron.
No mechanical stress should be exerted on the resin portion of an High-power LED during soldering.
Handling of an High-power LED should be done only when the package has been cooled down to below 40℃
(2)Reflow soldering
Temperature profile
Temperature
Peak temperature
Melting-point
Pre-heat
Soak
Reflow
Cooling
Time
Http://www.foryard.com
6/7
Page:
FYLP-1W-UWS-A
A
Model. No.
Rev.
Model No.:FYLP-1W-UWS-A
Solder=Sn63-Pb37
Solder= Pb-Free
Average ramp-up rate:4℃/sec.max
Average ramp-up rate:4℃/sec.max
Peak preheat temperature:100-150℃
preheat time:100seconds.max
Peak preheat temperature:100-150℃
preheat time:100seconds.max
ramp-down rate:6℃/sec.max
Peak temperature:230℃
ramp-down rate:6℃/sec.max
Peak temperature:250℃
Time within 5℃ of actual peak
Time within 5℃ of actual peak temperature=10 sec.
temperature=10 sec. max
max
Duration above 183℃ is 80 sec. max
Duration above 217℃ is 80 sec. max
High-power LED should not be modified after soldering. If modification cannot be avoided, the modification
must be pre-qualified to avoid damage to the High-power LEDs.
Reflow soldering should not be done more than one time
No stress should be exerted on the package during soldering.
3. Static Electricity
Static Electricity and surge voltage damage the LEDs. So it is recommended that an ESD wrist band,
ESD shoe strap or an anti-electrostatic glove be used when handling the LEDs.
All devices, equipment and machinery must be properly grounded
4. Others
Reverse voltage should not exceed the absolute maximum rating on the data sheet. The colour of the LEDs
is changed slightly an operating current and thermal.
This device should not be used in any type of fluid such as water, oil, organic solvent and etc
When washing is required, IPA (Isopropyl Alcohol) should be used.
The influence of ultrasonic cleaning on the leds depends on factors such as ultrasonic power and the way.
High-brightness LED light may injure human eyes. Avoid looking directly into lighted LED
The appearance and specifications of the product may be modified for improvement without notice.
Http://www.foryard.com
7/7
Page:
相关型号:
©2020 ICPDF网 联系我们和版权申明