F4716R-170.000-DMO [FOX]
Oscillator;
| 型号： | F4716R-170.000-DMO |
| 厂家： | 
FOX ELECTRONICS |
| 描述： | Oscillator |
| 文件： | 总1页 (文件大小：178K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
2.5V LVDS OSCILLATOR WITH STANDBY
MODEL: F4710 SERIES
FEATURES
• 2.5V Operation
• LVDS Output
• Differential Outputs
• Standby Function
• Tape and Reel (2,000 pcs. STD)
Learn more about:
Part Marking Identification
Tape and Reel Specification
PRELIMINARY
• PART NUMBER SELECTIONLearn More - Internet Required
Operating
Frequency
Model Frequency
Mechanical Specification
Part Number
Range (MHz)2
Number Stability1 Temperature (ºC)
Internet required
710-Frequency-xxxxx
711-Frequency-xxxxx
712-Frequency-xxxxx
713-Frequency-xxxxx
714-Frequency-xxxxx
715-Frequency-xxxxx
716-Frequency-xxxxx
60.000 ~ 170.000
60.000 ~ 170.000
60.000 ~ 170.000
60.000 ~ 170.000
60.000 ~ 170.000
60.000 ~ 170.000
60.000 ~ 170.000
F4710
F4710R ±100PPM
F4715 ±50PPM
F4715R ±50PPM
F4716 ±25PPM
F4716R ±25PPM*
F4718 ±20PPM*
±100PPM
-10 ~ +70
-40 ~ +85
-10 ~ +70
-40 ~ +85
-10 ~ +70
-40 ~ +85
-10 ~ +70
• ELECTRICAL CHARACTERISTICS
MAX (unless otherwise noted)
60.000 ~ 250.000 MHz
-55ºC ~ +125ºC
2.5V ± 5%
PARAMETERS
Frequency Range (FO)
Storage Temperature Range (TSTG)
Supply Voltage
Input Current
(VDD)
(IDD)
63mA
Differential Output Voltage
(VOD) (Out 1 - Out 2)
Offset Voltage (VOS)
0.247V ~ 0.454V
(0.33V Typical)
1.125V ~ 1.375V
(1.25V Typical)
0.25Vp-p Min
45% ~ 55%
0.7nS
0.7nS
100 Ohms Typical
30μA
Differential Output Swing (VOp-p)
Output Symmetry (Output Crossing Point)
Rise Time (TR) (20% ~ 80% VDD)
Fall Time (TF) (80% ~ 20% VDD)
Output Load (Out 1 - Out 2)
Standby Current
Start-up Time
(TS)
10mS
200nS
10mS
Output Disable Time 3
Output Enable Time 3
1 Inclusive operating temperature range, input voltage change, load change, aging,
shock, and vibration. (*F4716R, F4718R: Excludes Shock/Vibration)
2 Frequencies up to 250 MHz are available on an inquiry basis.
3 An internal pullup resistor from pin 1 to pin 6 allows active output if pin 1 is left open.
Note: A 0.01μF bypass capacitor should be placed between VDD (Pin 6) and GND (Pin 3) to
minimize power supply line noise.
All specifications subject to change without notice. Rev. 9/12/05
All dimensions are in millimeters.
• ENABLE / DISABLE FUNCTION
OUTPUT (Pin 4)
ACTIVE
(Pin 1)
OPEN 3
OUTPUT (Pin 5)
ACTIVE
ACTIVE
High Z
'1' Level VIH ≥ 70% VDD
'0' Level VIL ≤ 30% VDD
ACTIVE
High Z
FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1(239) 693.0099 FAX +1 (239) 693.1554 http://www.foxonline.com
Asia Hong Kong +852.2854.4285 FAX +852.2854.4282
69
© 2005 FOX ELECTRONICS
相关型号：
©2020 ICPDF网 联系我们和版权申明