F4718 [FOX]
LVDS 7x5mm 2.5V Oscillator; LVDS 7x5毫米2.5V振荡器
| 型号： | F4718 |
| 厂家： | 
FOX ELECTRONICS |
| 描述： | LVDS 7x5mm 2.5V Oscillator |
| 文件： | 总1页 (文件大小：208K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
LVDS 7x5mm 2.5V Oscillator
RoHS compꢃiaꢁt / Pꢂ Free
F4710 SERꢀES
Rev. 1/6/2006
FEATURES
• 2.5V Operation
• LVDS Output
• Differential Outputs
• Standby Function
• Tape and Reel (2,000 pcs. STD)
learꢁ more aꢂout:
Part Marking Identification
Tape and Reel Specification
Mechanical Specification
ꢀꢁterꢁet required
• PART nUMbER SElEcTꢀOnLearn More - Internet Required
Operating
Frequency
Range (MHz)2
Model Frequency
Part Number
Number Stability1 Temperature (ºC)
710-Frequency-xxxxx
711-Frequency-xxxxx
712-Frequency-xxxxx
713-Frequency-xxxxx
714-Frequency-xxxxx
715-Frequency-xxxxx
716-Frequency-xxxxx
-10 ~ +70
-40 ~ +85
-10 ~ +70
-40 ~ +85
-10 ~ +70
-40 ~ +85
-10 ~ +70
80.000 ~ 170.000
80.000 ~ 170.000
80.000 ~ 170.000
80.000 ~ 170.000
80.000 ~ 170.000
80.000 ~ 170.000
80.000 ~ 170.000
F4710
F4710R
F4715
±100PPM
±100PPM
±50PPM
F4715R ±50PPM
F4716
F4716R
F4718
±25PPM
±25PPM*
±20PPM*
• ElEcTRꢀcAl cHARAcTERꢀSTꢀcS
MAX (unless otherwise noted)
80.000 ~ 250.000 MHz
-55ºC ~ +125ºC
2.5V ± 5%
PARAMETERS
Frequency Range (Fo)
Storage Temperature Range (Tstg)
Supply Voltage
Input Current
(Vdd)
(Idd)
63mA
Differential Output Voltage
(Vod) (Out 1 - Out 2)
Offset Voltage (Vos)
0.247V ~ 0.454V
(0.33V Typical)
1.125V ~ 1.375V
(1.25V Typical)
0.25Vp-p Min
45% ~ 55%
0.7nS
0.7nS
100 Ohms Typical
30µA
Differential Output Swing (Vop-p)
Output Symmetry (Output Crossing Point)
Rise Time (Tr) (20% ~ 80% Vdd)
Fall Time (Tf) (80% ~ 20% Vdd)
Output Load (Out 1 - Out 2)
Standby Current
Start-up Time
(Ts)
10mS
200nS
10mS
Output Disable Time 3
Output Enable Time 3
1 Inclusive operating temperature range, input voltage change, load change, aging,
shock, and vibration. (*F4716R, F4718R: Excludes Shock/Vibration)
2 Frequencies up to 250 MHz are available on an inquiry basis.
3 An internal pullup resistor from pin 1 to pin 6 allows active output if pin 1 is left open.
Note: A 0.01µF bypass capacitor should be placed between Vdd (Pin 6) and GND (Pin 3) to
minimize power supply line noise.
All specifications subject to change without notice.
All dimensions are in millimeters.
• EnAblE / DꢀSAblE FUncTꢀOn
OUTPUT (Pin 4)
(Pin 1)
OUTPUT (Pin 5)
ACTIVE
ACTIVE
OPEN 3
ACTIVE
ACTIVE
High Z
'1' Level Vih ≥ 70% Vdd
'0' Level Vil ≤ 30% Vdd
High Z
FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1(239) 693.0099 FAX +1 (239) 693.1554 http://www.foxonline.com
EMEA United Kingdom Tel/Fax: +44 .1767.312632
| Asia Hong Kong Tel: +852.2854.4285 FAX +852.2854.4282
73
© 2006 FOX ELECTRONICS | ISO9001:2000 Certified
相关型号：
©2020 ICPDF网 联系我们和版权申明