FC2BADADP24.0-T2 [FOX]
暂无描述;型号: | FC2BADADP24.0-T2 |
厂家: | FOX ELECTRONICS |
描述: | 暂无描述 |
文件: | 总2页 (文件大小:207K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
2.5 x 2.0mm Auto Grade Crystal C2BA
(former FXA2520B)
DATASHEET
AEC Q200 Qualified
IATF-16949 QMS
Tolerances down to ±10 PPM
Stabilities down to ±20 PPM
• SPECIFICATIONS
MAX (unless otherwise noted)
PARAMETERS
Frequency Range
12.000 ~ 54.000 MHz
(See options on page 2)
(See options below)
Frequency Tolerance @ 25ºC
Frequency Stability, ref @ 25ºC
Temperature Range
Operating (TOPR
Storage (TSTG
Shunt Capacitance (C0)
Load Capacitance (CL)
Drive Level
)
)
See options below
-55ºC ~ +150ºC
3pF
(See options on page 2)
100µW
Aging per year
±5 PPM
Maximum Soldering Temp / Time
Moisture Sensitivity Level (MSL)
Termination Finish
Seal Method
Lead (Pb) Free
260ºC / 10 Seconds x 2
1
Au over Ni
Seam
Yes
RoHS Compliant
Yes
Frequency Range
(MHz)
Operating Mode
Fundamental
Max ESR Ω
12.000 ~ 13.999999
14.000 ~ 15.999999
16.000 ~ 19.999999
20.000 ~ 23.999999
24.000 ~ 24.999999
25.000 ~ 44.999999
45.000 ~ 54.000
200
150
90
70
60
Fundamental
Fundamental
Fundamental
Fundamental
Fundamental
Fundamental
50
40
Note: Dimensional drawing is for reference to critical specifications
defined by size measurements.
•Available Operating Temperatures and Stabilities
Operating
Temperature
±20 PPM
±25 PPM
±30 PPM
±50 PPM
±100 PPM
O
X
X
X
-40 ~ +85ºC
-40 ~ +105ºC
-40 ~ +125ºC
-55 ~ +125ºC
O
X
X
X
O
O
X
X
O
O
O
O
O
O
O
O
Key: O=Available, X=Not Available,
1Does not imply stocked part.
Reference / Comments
Title / Description: C2BA SERIES STANDARD SPECIFICATIONS
Drawing Number: C2BA-DOC-2
Size: A
Part Number:
Draftsperson: BEC
Cage: 61429
Date: 06/04/2019
Approved: MAJ
© Copyright 2019 Fox Electronics. All rights reserved
2.5 x 2.0mm Auto Grade Crystal C2BA
(former FXA2520B)
DATASHEET
• TAPE SPECIFICATIONS (millimeters)
• REEL SPECIFICATIONS(millimeters)
B
C
D
E
F
Reel QTY
G
I
J
K
L
H
M
A
-T3 = 3,000
4.0 4.0 3.5 8.0 0.8 -T2 = 2,000
2.5
13
21
60 180
9.0
1.55
2.0
-T1 = 1,000
1.75
Available
O
ptions & Part
I
dentification for Automotive Crystal Model C2BA1
F C2BA B C V I 40.0
F
C2BA
B
C
V
I
40.0
FOX
Model
Tolerance
Stability
Load
Operating
Temperature
M = -40 to +85°C
Frequency
(MHz)
Capacitance2
Number
B = ±50 PPM
C = ±30 PPM
D = ±25 PPM
E = ±20 PPM
F = ±15 PPM
H = ±10 PPM
A = ±100 PPM
B = ±50 PPM
C = ±30 PPM
D = ±25 PPM
E = ±20 PPM
V=7pF
D=8pF
P = -40 to +105°C
I = -40 to +125°C
T = -55 to +125ºC
E=10pF
G=12pF
J=15pF
K=16pF
L=18pF
M=20pF
1
2
Not all frequency, tolerance, stability, load, and operating temperature combinations may be available.
Listed load capacitances represent the most commonly used. Other load capacitances are available. Contact Fox Technical Support for assistance
Corporate Headquarters
5570 Enterprise Parkway
Fort Myers, FL 33905
Sales
Tech Support
http://www.FOXONLINE.com/email
1-888-GET-2-FOX (1-888-438-2369) or
1-239-693-0099
http://www.FOXONLINE.com
http://www.FOXONLINE.com/repdisty
PRODUCT USE: Fox Electronics reserves the right to modify the products and/or specifications described herein at any time and at Fox Electronics' sole
discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance
specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way
when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied,
including, but not limited to, the suitability of Fox Electronics' products for any particular purpose, an implied warranty of merchantability, or non-infringement of
the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of Fox
Electronics or any third parties.
Fox Electronics' products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where
the failure or malfunction of a Fox Electronics product can be reasonably expected to significantly affect the health or safety of users. Anyone using a Fox
Electronics product in such a manner does so at their own risk, absent an express, written agreement by Fox Electronics.
Fox Electronics and the Fox logo are registered trademarks of Fox Electronics. Product specification is subject to change without notice. Other trademarks and
service marks used herein, including protected names, logos and designs, are the property of Fox Electronics or their respective third-party owners.
For datasheet type definitions and a glossary of common terms, visit http://www.foxonline.com/tgcrystals.html .
Reference / Comments
Title / Description: C2BA SERIES STANDARD SPECIFICATIONS
Drawing Number: C2BA-DOC-2
Size: A
Part Number:
Draftsperson: BEC
Cage: 61429
Date: 06/04/2019
Approved: MAJ
© Copyright 2019 Fox Electronics. All rights reserved
相关型号:
©2020 ICPDF网 联系我们和版权申明