FC5AQBHVC25.0-T1 [FOX]
Parallel - Fundamental Quartz Crystal, 25MHz Nom, SMD, 2 PIN;型号: | FC5AQBHVC25.0-T1 |
厂家: | FOX ELECTRONICS |
描述: | Parallel - Fundamental Quartz Crystal, 25MHz Nom, SMD, 2 PIN 驱动 晶体 谐振器 |
文件: | 总2页 (文件大小:198K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
5.0mm x 3.2mm SMD Crystal
C5AQ
(former FQ5032A)
DATASHEET
Page 1 of 2
•
•
Tolerances down to 20 PPM
Stabilities down to 10 PPM
• C5BQ STANDARD SPECIFICATIONS
PARAMETERS
MAX (unless otherwise noted)
Frequency Range
(Fo)
8.000 ~ 48.000 MHz
Frequency Tolerance @ 25ºC
Frequency Stability, ref @ 25ºC
Over Operating Temp Range
Temperature Range
(See options on page 2)
(See options below)
Operating
Storage
(TOPR)
(TSTG)
(See options below)
-40ºC ~ +85ºC
5 pF
Shunt Capacitance
Load Capacitance
(Co)
(CL)
(See options on page 2)
Drive Level
0.5 mW
±5 PPM
Ag
Resin
Yes
Aging per year
Termination Finish
Seal Method
Lead (Pb) Free
RoHS Compliant
Yes
Frequency Range
(MHz)
Operating Mode
Max ESR
Fundamental
Fundamental
Fundamental
8.000000 ~ 11.999999
12.000000 ~ 16.000
16.000001 ~ 48.000
100
80
50
All dimensions are in millimeters.
Note: Dimensional drawing is for reference to critical specifications
defined by size measurements. Certain non-critical visual attributes,
such as side castellations, etc. may vary.
• Available Operating Temperatures and Stabilities*
Stability Temperature
±10 PPM
±30 PPM
±50 PPM
±15 PPM
±20 PPM
±25 PPM
O
O
X
0 ~+70ºC
-20 ~+70ºC
-40 ~+85ºC
O
O
X
O
O
X
O
O
X
O
O
O
O
O
O
Key: O=Available, X=Not Available, ∆=Consult Fox Technical Support
*Does not imply a stocked part.
Title / Description: C5AQ SERIES STANDARD SPECIFICATIONS
Drawing Number: 101148
Part Number:
Size: A
Cage: 61429
Draftsperson: BEC
Approved: MAJ
Revision Date:
© Copyright 2019 Fox Electronics. All rights reserved
04/16/2019
5.0mm x 3.2mm SMD Crystal
C5AQ
(former FQ5032A)
DATASHEET
Page 2 of 2
• REEL SPECIFICATIONS(millimeters)
• TAPE SPECIFICATIONS (millimeters)
G
I
J
K
L
H
M
B
C
D
E
F
STD Reel QTY
-T1 = 1,000
A
2.0
13 21 62 180 13.5
2.0
4.0
8.0
5.5
12.0
1.5
1.5
Available
Options & Part I
dentification for SMD Crystal C5AQ1
F C5AQ C C M C 25.0
F
FOX
C5AQ
C
C
M
C
25.0
Frequency
(MHz)
Model
Tolerance
B=50ppm
C=30ppm
D=25ppm
E=20ppm
Stability
Load
Capacitance2
V=7pF
Operating
Number
Temperature
B=50ppm
C=30ppm
D=25ppm
E=20ppm
F=15ppm
H=10ppm
C=0 to +70C
F=-20 to +70C
M=-40 to +85C
D=8pF
E=10pF
G=12pF
K=16pF
M=20pF
1 Not all frequency, tolerance, stability, load, and operating temperature combinations may be available.
2 Listed load capacitances represent the most commonly used. Other load capacitances are available.
Contact Fox Technical Support for assistance
Corporate
Headquarters
5570 Enterprise Parkway
Fort Myers, FL 33905
Sales
Tech Support
http://www.FOXONLINE.com/email
1-888-GET-2-FOX (1-888-438-2369) or
1-239-693-0099
http://www.FOXONLINE.com/repdisty
http://www.FOXONLINE.com
PRODUCT USE: Fox Electronics reserves the right to modify the products and/or specifications described herein at any time and at Fox Electronics' sole discretion.
All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the
operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer
products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the
suitability of Fox Electronics' products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of
others. This document is presented only as a guide and does not convey any license under intellectual property rights of Fox Electronics or any third parties.
Fox Electronics' products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the
failure or malfunction of a Fox Electronics product can be reasonably expected to significantly affect the health or safety of users. Anyone using a Fox Electronics
product in such a manner does so at their own risk, absent an express, written agreement by Fox Electronics.
Fox Electronics and the Fox logo are registered trademarks of Fox Electronics. Product specification is subject to change without notice. Other trademarks and
service marks used herein, including protected names, logos and designs, are the property of Fox Electronics or their respective third party owners.
For datasheet type definitions and a glossary of common terms, visit http://www.foxonline.com/tgcrystals.html .
Title / Description: C5AQ SERIES STANDARD SPECIFICATIONS
Drawing Number: 101148
Part Number:
Size: A
Cage: 61429
Draftsperson: BEC
Approved: MAJ
Revision Date:
© Copyright 2019 Fox Electronics. All rights reserved
04/16/2019
相关型号:
©2020 ICPDF网 联系我们和版权申明