FCABSFHDF36.999999 [FOX]
Quartz Crystal, 32MHz Min, 80MHz Max, 36.999999MHz Nom,;型号: | FCABSFHDF36.999999 |
厂家: | FOX ELECTRONICS |
描述: | Quartz Crystal, 32MHz Min, 80MHz Max, 36.999999MHz Nom, 驱动 晶体 谐振器 |
文件: | 总2页 (文件大小:206K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
1.2x1.0mm Ceramic SMD Crystal CABS
DATASHEET
Tolerances down to ±10 PPM
Stabilities down to ±10 PPM
Temperature Ranges as wide as -40ºC to +85ºC
• SPECIFICATIONS
MAX (unless otherwise noted)
PARAMETERS
Frequency Range
32.000 ~ 80.000 MHz
(See options on page 2)
(See options below)
Frequency Tolerance @ 25ºC
Frequency Stability, ref @ 25ºC
Temperature Range
Operating (TOPR
Storage (TSTG
Shunt Capacitance (C
)
)
(See options below)
-55ºC ~ +125ºC
2 pF
O)
Load Capacitance (CL)
Drive Level
(See options on page 2)
100 µW (10µW typical)
Aging per year
±3 PPM
Maximum Soldering Temp / Time
Moisture Sensitivity Level (MSL)
Termination Finish
260ºC / 10 Seconds x 2
1
Au over Ni
Yes
Lead (Pb) Free
RoHS/REACH Compliant
Yes
Frequency Range
(MHz)
32.000 ~ 32.999999
33.000 ~ 36.999999
37.000 ~ 80.000
Operating Mode
Fundamental
Max ESR Ω
100
80
60
Fundamental
Fundamental
.
•Available Operating Temperatures and Stabilities*
Operating
±10 PPM
±15 PPM
±20 PPM
±25 PPM
Temperature
-20 ~+70ºC
-30 ~+85ºC
-40 ~+85ºC
O
X
X
O
O
O
O
O
O
O
O
O
Key: O=Available, X=Not Available
*Does not imply a stocked part.
Note: Dimensional drawing is for reference to critical specifications defined by size measurements.
Certain non-critical visual attributes, such as side castellations, etc. may vary.
Title / Description: CABS SERIES STANDARD SPECIFICATIONS
Drawing Number: CABS-DOC-1
Size: A
Part Number:
Cage: 61429
Draftsperson: BEC
Approved: MAJ
Revision Date: 06/13/2019
© Copyright 2019 Fox Electronics. All rights reserved
Page 1 of 2
1.2x1.0mm Ceramic SMD Crystal CABS
DATASHEET
• TAPE SPECIFICATIONS (millimeters)
• REEL SPECIFICATIONS(millimeters)
B
C
D
E
F
Reel QTY
I
J
K
L
A
H
M
G
4.0
4.0
3.5
8.0
0.45 -T3 = 3,000
-T5 = 5,000
13
21
60
180
9.0
1.5
2.0
1.5
Available
Options & Part Identification for CABS*
F CABS F F D M 40.0
F
CABS
F
F
D
M
40.0
FOX
Model
Number
Tolerance
D = ±25 PPM
E = ±20 PPM
F = ±15 PPM
H = ±10 PPM
Stability
Load
Operating
Frequency
(MHz)
Capacitance1
B = 6 pF
Temperature
F = -20 ~ +70ºC
K = -30 ~ +85ºC
M = -40 ~ +85°C
D = ±25 PPM
E = ±20 PPM
F = ±15 PPM
H = ±10 PPM
V = 7 pF
D = 8 pF
E = 10 pF
G = 12 pF
*Not all frequency, tolerance, stability, load, and operating temperature combinations may be available.
1
Listed load capacitances represent the most commonly used. Other load capacitances are available.
Corporate Headquarters
5570 Enterprise Parkway
Fort Myers, FL 33905
Sales
Tech Support
http://www.FOXONLINE.com/email
1-888-GET-2-FOX (1-888-438-2369) or
1-239-693-0099
http://www.FOXONLINE.com
http://www.FOXONLINE.com/repdisty
PRODUCT USE: Fox Electronics reserves the right to modify the products and/or specifications described herein at any time and at Fox Electronics' sole
discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance
specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way
when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied,
including, but not limited to, the suitability of Fox Electronics' products for any particular purpose, an implied warranty of merchantability, or non-infringement of
the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of Fox
Electronics or any third parties.
Fox Electronics' products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where
the failure or malfunction of a Fox Electronics product can be reasonably expected to significantly affect the health or safety of users. Anyone using a Fox
Electronics product in such a manner does so at their own risk, absent an express, written agreement by Fox Electronics.
Fox Electronics and the Fox logo are registered trademarks of Fox Electronics. Product specification is subject to change without notice. Other trademarks and
service marks used herein, including protected names, logos and designs, are the property of Fox Electronics or their respective third-party owners.
For datasheet type definitions and a glossary of common terms, visit http://www.foxonline.com/tgcrystals.html .
Title / Description: CABS SERIES STANDARD SPECIFICATIONS
Drawing Number: CABS-DOC-1
Size: A
Part Number:
Cage: 61429
Draftsperson: BEC
Approved: MAJ
Revision Date: 06/13/2019
© Copyright 2019 Fox Electronics. All rights reserved
Page 2 of 2
相关型号:
©2020 ICPDF网 联系我们和版权申明