FO7PUHBM160.0 [FOX]
XO, Clock,;型号: | FO7PUHBM160.0 |
厂家: | FOX ELECTRONICS |
描述: | XO, Clock, 石英晶振 |
文件: | 总3页 (文件大小:212K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Ultra-Low Jitter 7x5mm SMD Oscillator
O7PU
(Former F4600U series)
DATASHEET
•
•
•
•
Ultra-Low Jitter (0.1pS)
LV-PECL
Temperature Ranges to -40ºC to +85ºC
Supply Voltages: 3.3V; 2.5V
ELECTRICAL CHARACTERISTICS
PARAMETERS
MAX (unless otherwise noted)
Supply Voltage
Frequency Range (FO)
Storage Temperature Range (TSTG
(VDD
)
3.3V±5%
70.0 ~ 170.0MHz
2.5V±5%
100.0 ~ 160.0MHz
-55 ~ +125°C
)
Input Current
Standby Current
(IDD)
75mA
15µA
Output Symmetry (50% Vp-p
Rise Time (20% ~80% Vp-p Levels) (TR)
Fall Time (80% ~ 20% Vp-p Levels) (TF)
)
45% ~ 55%
1nS
1nS
Output Voltage
(VOL
)
1.68V
1.095V
(VOH
)
2.275V Min
1.475V Min
Output Load
50 Ohms to Vdd-2.0V
Start-up Time
Phase Jitter, RMS (12kHz to 20MHz BW)
(TS)
10mS
0.1pS
ENABLE / DISABLE FUNCTION
Pin 1
Out 1 (Pin 4), Out 2 (Pin 5)
OPEN1
Active
Active
High Z
‘1’ Level VIH ≥ 70% VDD
‘0’ Level VIL 30%VDD
Frequency
Operating
Stability
Temperature (ºC)
±100PPM2
±100PPM2
±50PPM2
±50PPM2
±25PPM2
±25PPM2
±20PPM3
-10 ~ +70
-40 ~ +85
-10 ~ +70
-40 ~ +85
-10 ~ +70
-40 ~ +85
-10 ~ +70
1 An internal pull-up resistor from pin 1 to pin 6 allows active output if pin 1 is left open.
2 Inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, reflow, one-year aging, shock, and vibration.
3 Inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, reflow, shock, and vibration
Title / Description: O7PU SERIES STANDARD SPECIFICATIONS
Drawing Number: O7PU-DOC-1
Part Number:
Size: A
Cage: 61429
Draftsperson: BEC
Approved: MAJ
Revision Date: 08/20/2019
© Copyright 2019 Fox Electronics. All rights reserved
Page 1 of 3
Ultra-Low Jitter 7x5mm SMD Oscillator
O7PU
(Former F4600U series)
DATASHEET
DIMENSIONS / MECHANICAL SPECIFICATIONS
Maximum Soldering Temp / Time
Moisture Sensitivity Level (MSL)
Termination Finish
260°C / 10 Seconds x2
1
Au over Ni
Seam
Yes
Seal Method
Lead (Pb) Free
ROHS/REACH Compliant
Yes
Notes:
*A 0.01μF capacitor should be placed between VDD (Pin 6) and GND (Pin3) to minimize power supply line noise.
*Dimensional drawing is for reference to critical specifications defined by size measurements.
Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary
Title / Description: O7PU SERIES STANDARD SPECIFICATIONS
Drawing Number: O7PU-DOC-1
Part Number:
Size: A
Cage: 61429
Draftsperson: BEC
Approved: MAJ
Revision Date: 08/20/2019
© Copyright 2019 Fox Electronics. All rights reserved
Page 2 of 3
Ultra-Low Jitter 7x5mm SMD Oscillator
O7PU
(Former F4600U series)
DATASHEET
Tape Specifications (millimeters)
Reel Specifications (millimeters)
A
B
C
D
E
F
Reel Qty
G
H
I
J
K
L
M
Ø1.5
4.0
8.0
7.5
16.0
2.0
-T1 = 1,000
2.3
Ø13
Ø21
Ø80 Ø180 16.4
2.0
Available Options & Part Identification*
Example: F O7PU B B M 125.0
F
O7PU
B
B
M
125.0
Fox
Model Number
Voltage
Stability
Operating
Temperature
E = -10 to +70ºC
M = -40 to +85°C
Frequency
B = 3.3V±5%
H = 2.5V±5%
A = ±100 PPM
B = ±50 PPM
D = ±25 PPM
E = ±20 PPM
*Not all frequencies in the frequency range, or every combination of stability, temp range may be available.
Corporate Headquarters
5570 Enterprise Parkway
Fort Myers, FL 33905
Sales
Tech Support
http://www.FOXONLINE.com/email
1-888-GET-2-FOX (1-888-438-2369)
or
1-239-693-0099
http://www.FOXONLINE.com
http://www.FOXONLINE.com/repdisty
Product use: Fox Electronics reserves the right to modify the products and/or specifications described herein at any time and at Fox Electronics'
sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice.
Performance specifications and the operating parameters of the described products are determined in the independent state and are not
guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or
warranty of any kind, whether express or implied, including, but not limited to, the suitability of Fox Electronics' products for any particular purpose,
an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide
and does not convey any license under intellectual property rights of Fox Electronics or any third parties.
Fox Electronics' products are not intended for use in applications involving extreme environmental conditions or in life support systems or
similar devices where the failure or malfunction of a Fox Electronics product can be reasonably expected to significantly affect the health or
safety of users. Anyone using a Fox Electronics product in such a manner does so at their own risk, absent an express, written agreement by
Fox Electronics.
Fox Electronics and the Fox logo are registered trademarks of Fox Electronics. Product specification is subject to change without notice.
Other trademarks and service marks used herein, including protected names, logos and designs, are the property of Fox Electronics or their
respective third-party owners.
Title / Description: O7PU SERIES STANDARD SPECIFICATIONS
Drawing Number: O7PU-DOC-1
Part Number:
Size: A
Cage: 61429
Draftsperson: BEC
Approved: MAJ
Revision Date: 08/20/2019
© Copyright 2019 Fox Electronics. All rights reserved
Page 3 of 3
相关型号:
©2020 ICPDF网 联系我们和版权申明