FXU-LC516R [FOX]
LVDS 5 x 3.2mm 1.8V Oscillator;型号: | FXU-LC516R |
厂家: | FOX ELECTRONICS |
描述: | LVDS 5 x 3.2mm 1.8V Oscillator |
文件: | 总11页 (文件大小:646K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PRELIMINARY SPECIFICATIONS
Model: FXU-LC51 SERIES
LVDS 5 x 3.2mm 1.8V Oscillator
Features
Freq: 0.016 MHz to 1.0 GHz*
Rev. 02/13/2014
ULTRA Low Jitter
Low Cost
PRESS Delivery
X
Frequency Resolution to six decimal places
Stabilities to ± 20 PPM
-20 to +70°C or -40 to +85°C operating temperatures
Tri-State Enable / Disable Feature
Industry Standard Package, Footprint & Pin-Out
Fully RoHS compliant
Applications
ANY application requiring a high
performance LVDS oscillator
SONET
Gold over Nickel Termination Finish
Serial ID with Comprehensive Traceability
Ethernet
Storage Area Network
Broadband Access
V
DD
Enable / Disable
Microprocessors / DSP / FPGA
Industrial Controllers
Test and Measurement Equipment
FOX
OUTPUT
XPRESSO
ASICs
GND
For more information -- Click on the drawing
Contents
page
2
3
3
4
5
5
6
6
6
7
8
8
Model Selection & Part Number Guide
Electrical Characteristic
Absolute Maximums
Output Wave Characteristics
Phase Noise
Description
The Fox XPRESSO-ULTRA Crystal Oscillator is a
breakthrough in configurable Frequency Control
Solutions. XPRESSO-ULTRA utilizes a family of
proprietary ASICs, designed and developed by Fox,
with a key focus on noise reduction technologies.
Jitter
Pin Assignment
Recommended Circuit
Reflow
Mechanical Drawing and Pad Layout
Tape and Reel Specification
Label
Traceability – LOT Number & Serial Identification
Mechanical Test
Other XPRESSO Series Links
Fox Contact Information
The 4th order Delta Sigma Modulator reduces noise to
the levels that are comparable to traditional Bulk
Quartz and SAW oscillators. The ASICs family has
the ability to select the output type and supply
voltage.
9
10
11
11
With the XPRESSO-ULTRA lead-time, low cost, low
noise, wide frequency range, excellent ambient
performance, XPRESSO-ULTRA is an excellent choice
over the conventional technologies.
Finished XPRESSO-ULTRA parts are 100% final
tested.
Note * – Higher frequencies are available.
Contact Fox Technical Support for details.
Page 1 of 11
Fox Electronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554
An Integrated Device Technology, Inc. company FOXonline.com
PRELIMINARY SPECIFICATIONS
FXU-LC51 Series
Output Wave Characteristics
Maximum Value
Parameters
Differential Output Voltage
Output Offset Voltage
Symbol
Condition
0.016 MHz to 1.0 GHz
0.016 MHz to 1.0 GHz
(unless otherwise noted)
+0.5V Typical
VOD
VOS
+1.2V Typical
Output Symmetry
0.016 MHz to 500 MHz
500+ MHz to 1.0 GHz
45% ~ 55% Typical
40% ~ 60% Typical
≥ 70% VDD
@ 50% VP-P Level (See Drawing Below)
Output Enable Note1 (PIN # 1) Voltage
VIH
VIL
Output DisableNote1 (PIN # 1) Voltage
≤ 30% VDD
Cycle Rise Time
0.016 MHz to 1.0 GHz
0.016 MHz to 1.0 GHz
TR
TF
300 pS Typical
(20%~80%VP-P - See Drawing Below)
Cycle Fall Time
300 pS Typical
(80%~20%VP-P - See Drawing Below)
Note1
An optional PIN # 2 as Enable / Disable is available – see Model Selection Guide (page 2)
Page 4 of 11
© 2014 FOX ELECTRONICS | ISO9001:2000 Certified
An Integrated Device Technology, Inc. company
PRELIMINARY SPECIFICATIONS
FXU-LC51 Series
Phase Noise (typical measurement at 155.52 MHz)
Jitter is frequency dependent. Below are typical values at select frequencies.
LVDS Phase Jitter
Phase Jitter (pS)
Frequency
(12kHz to 20MHz)
125 MHz
0.714
0.678
155.52 MHz
Phase Jitter is integrated from Agilent 5052A Signal Noise Analyzer; measured directly into 50 ohm input; VDD = 1.8V.
)
Page 5 of 11
© 2014 FOX ELECTRONICS | ISO9001:2000 Certified
An Integrated Device Technology, Inc. company
PRELIMINARY SPECIFICATIONS
FXU-LC51 Series
Pin Description and Recommended Circuit
Pin #
Name
Type
Logic
Function
Enable / Disable Control of Output (0 = Disabled)
No Connection – Leave OPEN
E / D 1
1
2
2
NC
3
GND
Output
Output 2
Ground
Output
Output
Power
Electrical Ground for VDD
4
LVDS Oscillator Output
5
Complementary LVDS Output
Power Supply Source Voltage
3
6
VDD
NOTES:
1
2
3
Includes pull-up resistor to VDD to provide output when the pin (1) is No Connect. (Also see note 2)
An optional pin # 2 Enable / Disable is available.
Installation should include a 0.01µF bypass capacitor placed between VDD
(Pin 6) and GND (Pin 3) to minimize power supply line noise.
E / D
VDD
6
5
4
1
NC
Output 2
Output
2
GND
3
Terminations as viewed from the Top
NOTE: XPRESSO-ULTRA LVDS XOs are designed to
fit on Industry Standard, 6 pad layouts
Enable / Disable Control
Pin # 1 (state)
OPEN (No Connection)
Output (Pin # 4, Pin # 5)
ACTIVE Output
“1” Level VIH ≥ 70% VDD
“0” Level VIL ≤ 30% VDD
ACTIVE Output
High Impedance
Soldering Reflow Profile (2 times Maximum at 260°C for 10 seconds MAX)
Page 6 of 11
© 2014 FOX ELECTRONICS | ISO9001:2000 Certified
An Integrated Device Technology, Inc. company
PRELIMINARY SPECIFICATIONS
FXU-LC51 Series
Mechanical Dimensional Drawing & Pad Layout
Actual part marking
is depicted.
See Traceability (pg. 9)
for more information
NOTE: XPRESSO-ULTRA LVDS XOs are designed
to fit on Industry Standard, 6 pad layouts
Pin Connections
#1) E/D
#2) NC
#3) GND
#4) Output
#5) Output 2
#6) VDD
Drawing is for reference to critical specifications defined by size measurements.
Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary
Page 7 of 11
© 2014 FOX ELECTRONICS | ISO9001:2000 Certified
An Integrated Device Technology, Inc. company
PRELIMINARY SPECIFICATIONS
FXU-LC51 Series
Tape and Reel Dimensions
4.0mm
Ø1.5mm
12mm
2.15mm
8.0mm
2k Reel Dimensions
in mm
1k Reel Dimensions
2.0
in mm
2.0
120°
Ø21.0
Ø13.0
Ø21.0
Ø13.0
2.0
80.0
255.0
178.0
62.0
13.5
2.0
2.0
13.5
Labeling (Reels and smaller packaging are labeled with the below)
854B-622.08-3
Fox Part Number: 854B-622.08-3
Quantity:
2000 pieces
Description: FXU-LC515R-622.08
FXU-LC515R-622.08
1335
Date Code
LOT #
1335
(YYWW 2013 35th wk)
24435
If traceability should become necessary
An additional identification code is contained internally if tracking should ever be necessary
Page 8 of 11
© 2014 FOX ELECTRONICS | ISO9001:2000 Certified
An Integrated Device Technology, Inc. company
PRELIMINARY SPECIFICATIONS
FXU-LC51 Series
Traceability – LOT Number & Serial Identification
Page 9 of 11
© 2014 FOX ELECTRONICS | ISO9001:2000 Certified
An Integrated Device Technology, Inc. company
PRELIMINARY SPECIFICATIONS
FXU-LC51 Series
Mechanical Testing
Parameter
Test Method
MIL-STD-202 Method 213
Condition C
Mechanical Shock
MIL-STD-202 Method 204
5g's for 20 minutes
12 cycles of each 3 orientations: X, Y, Z
Mechanical Vibration
Under Power @ 125°C for 1000 Hours
He pressure: 4 ±1 kgf / cm2 2 Hour soak
High Temperature Operating Life (HTOL)
Hermetic Seal
Page 10 of 11
© 2014 FOX ELECTRONICS | ISO9001:2000 Certified
An Integrated Device Technology, Inc. company
PRELIMINARY SPECIFICATIONS
FXU-LC51 Series
XpressO-ULTRA Home
XpressO-ULTRA XOs
XpressO Brochure
Patent Numbers:
US 6,664,860, US 5,960,403, US 5,952,890; US 5,960,405; US 6,188,290;
Foreign Patents: R.S.A. 98/0866, R.O.C. 120851; Singapore 67081, 67082; EP 0958652
China ZL 98802217.6, Malaysia MY-118540-A, Philippines 1-1998-000245, Hong Kong #HK1026079, Mexico #232179
US and Foreign Patents Pending
XpressO®Fox Electronics
Contact Information
Fox EMEA
Tel: +44.1283.568153
Email: www.foxonline.com/email.htm
Fox Japan
(USA)-Worldwide Headquarters
Tel: 888-GET-2-FOX
Outside US: +1.239.693.0099,
Fax:+1.239.693.1554
Tel:+81.3.3374.2079,
Fax: +81.3.3377.5221
Email: www.foxonline.com/email.htm
Email: www.foxonline.com/email.htm
Fox Singapore
Tel:+886-2-22073427,
Email: www.foxonline.com/email.htm
The above specifications, having been carefully prepared and checked, is believed to be accurate at the time of publication; however, no
responsibility is assumed by Fox Electronics for inaccuracies.
Page 11 of 11
© 2014 FOX ELECTRONICS | ISO9001:2000 Certified
An Integrated Device Technology, Inc. company
相关型号:
©2020 ICPDF网 联系我们和版权申明