FGN-602PGSR [FUJIKURA]
Sensing element Gauge; 敏感元件测量仪
| 型号： | FGN-602PGSR |
| 厂家： | 
FUJIKURA LTD. |
| 描述： | Sensing element Gauge |
| 文件： | 总5页 (文件大小：195K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Sensing element／Gauge
FGN Data sheet
■Features
Surface mount package
■Ordering Information
ＦＧＮ－６ ０７Ｐ Ｇ ＳＲ
Terminal leads configuration
Surface mount package
Model
Length of the pressure port
Pressure type
G：Gauge Pressure
Rated Pressure
(PSI)
6：6mm
Weight
(grams)
RoHS compliance
0.35
Measurable pressure
range(kPa)
Part number
-13.79 to 13.79
-34.47 to 34.47
-48.26 to 48.26
FGN-602PGSR
FGN-605PGSR
FGN-607PGSR
■Specifications
Model
602PG
605PG
607PG
Unit
Recommended operating conditions
Pressure type
Gauge pressure
34.47
-34.47 to 34.47
0 to 50
-
Rated pressure
Measurable pressure range
Temperature range
13.79
-13.79 to 13.79
48.26
-48.26 to 48.26
kPa
kPa
deg.C
-
Pressure media
Non-corrosive gases only (No liquid)
1.5
Excitation current (Constant)
Absolute maximum rating
Maximum load pressure
Maximum excitation current
Operating temperature
Storage temperature
Operating humidity
mADC
Twice of rated pressure
-
3.0
0 to 80
-20 to 100
mADC
deg.C
deg.C
%RH
30 to 80 (Non dew condition)
Electric characteristics (Drive Current 1.5mA constant ,ambient temperature Ta=25deg.C)
Output span voltage
Offset voltage
Bridge resistance
Response time
40 to 130 (at 0kPa to rated pressure)
mV
mV
Ω
+/-25 (at 0kPa)
4000 to 6000
2 (for the reference)
+/-8
msec.
%FS/0-50deg.C
%FS/0-50deg.C
%FS
Accuracy
TSO*
TCS*
+/-10
5.0
+/-0.6
+/-1.0
2.5
+/-0.3
+/-0.7
Linearity
Pressure hysteresis
%FS
*TSO : Temperature sensitivity of offset voltage(Temperature range from 0-50 deg.C)
*TCS : Temperature coefficient of output span voltage(Temperature range from 0-50 deg.C)
1
Sensing element／Gauge
FGN Data sheet
P1= 0 kPa
T1= 0 deg.C
P2= 1/2 x P3 (kPa)
P3= reted pressure (kPa)
T2= 25 deg.C
T3= 50 deg.C
Offset voltage (mV)
Voff = V(P1,T)
Voff(0) = V(P1,T1)
Voff(25) = V(P1,T2)
Voff(50) = V(P1,T3)
Output voltage at full scale (mV)
Vfs = V(P3,T)
Vfs(0) = V(P3,T1)
Vfs(25) = V(P3,T2)
Vfs(50) = V(P3,T3)
Output span voltage (mV)
SV = Vfs - Voff
SV(0) = Vfs(0) - Voff(0)
SV(25) = Vfs(25) - Voff(25)
SV(50) = Vfs(50) - Voff(50)
Temperature sensitivity of offset voltage (%FS)
TSO = {LARGER ONE} / SV(25) x 100
LARGER ONE = larger absolute value which of {Voff(0)-Voff(25)} and {Voff(50)-Voff(25)}
Temperature coefficient of output span voltage (%FS)
TCS = {max[SV(0),SV(25),SV(50)] - min[SV(0),SV(25),SV(50)] } / SV(25) x 100
Linearity (%FS)
NL = {V(P2,T2) - [Voff(25)+Vfs(25)]/2 } / SV(25) x 100
Pressure hysteresis (%FS)
Phys = {Voff’(25) - Voff(25) } / SV(25) x 100
Voff’(25) : Output voltage against P1 after stressing by P3 pressure.
2
Sensing element／Gauge
FGN Data sheet
■Outline dimensions■
FGN
2-φ1.1
■Connection diagram■
3
Sensing element／Gauge
FGN Data sheet
■Output characteristics■
↑Output voltage（mV）
Output span voltage
Offset voltage
-Rated pressure
0kPa
Rated pressure
Atomospheric
pressure
→Pressure（kPa）
Note ;
Please read instruction “Notes” before using the sensor.
Fujikura reserves the right to change specifications without notice.
Please keep the sensors sealed using static shielding bags on storage.The pins of the sensor are plated by Ag.
If the sensors expose to an atmosphere, the pins will be black by sulfuration.
Please set Zero-calibration function up your products. The offset voltage may be shifted some mechanical stress
such as mounting, installation and etc. over longtime using.
4
Sensing element／Gauge
FGN Data sheet
Reflow Soldering process recommendation profile
Package
Surface
Temperature
(Degree C)
230
210
150
Room
Temp.
Time
a
b
c
d
e
a: Rump up rate
b: Pre-heating
c: Rump up rate
d: Heating
1 or 2 deg.C/sec.
150 to 180 deg.C,within 60 to120sec.
1 to 2 deg.C/sec.
max.230 deg.C,max.10sec. 210 deg.C,within 30sec.
1 or 2 deg.C/sec.
e: Rump down rate
Note ;
1 ) Temperature means Surface temperature of the sensor package.
2 ) Reflow process max. 2 times.
3 ) Do not wash the sensor.
4 ) Do not put the solder and flux on the sensor package.
If you have any questions regarding technical issues or specifications, please contact us.
Fujikura Ltd. Sensor Department
Phone +81-(0)3-5606-1072
5-1 Kiba 1-chome, Koto-ku, Tokyo 135-8512, Japan
E-mail : sensor@fujikura.co.jp
5
相关型号：
©2020 ICPDF网 联系我们和版权申明