FBR21H03-P [FUJITSU]
MINIATURE RELAY 1 POLE-1 to 2 A (FOR SIGNAL SWITCHING); 小型继电器1 POLE - 1至2 A(用于信号切换)型号: | FBR21H03-P |
厂家: | FUJITSU |
描述: | MINIATURE RELAY 1 POLE-1 to 2 A (FOR SIGNAL SWITCHING) |
文件: | 总4页 (文件大小:43K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MINIATURE RELAY
1 POLE—1 to 2 A (FOR SIGNAL SWITCHING)
FBR20H SERIES
■ FEATURES
● Low power consumption
High efficiency electromagnetic cuit ower
consumption.
Nominal power consumption: 200
Operate power consumption: 112 mW
● Strong shock resistance
Even with 500 m/s2 shock, FBR20H Series relays never
miss an operation.
● High dielectric strength type avaconforms to
FCC68.302)
Dielectric strength between cil-coct:
AC 1,000 V
Surge strength between coil-contact: 1,500 V
● Easy pattern design
Separate location of drive (coil) and output (contact)
terminals allows easy PC board pattern design.
● Formed terminals for temporary mounting
The uniquely designed terminals alloFBR20H Series
ays to be mounted temporarily on PC boards.
L rognized (File No. E63615)
● Tue pakagng
■ ORDERIG NFORMATION
FBR21 N
(a) (b)
U
(d)
– P (–02)
(e) (f)
[Example]
Series Name
(Contact Style)
FR21: FBR20H Series (single contact)
BR22FBR20H Series (bifurcated contact)
(a)
(b)
Nil: Fx free type
N: Pstic seed ype
Enclosure
(Example) H03VDC
H05 VD
(c)
Nominal Voltage
H12: 12 C (fer to the COIL DATA CHART)
No designation: standar
U: UL114 recognized
(d)
(e)
(f)
UL Standard
Contact Material
Special Type
P: Gold-overlay silver-palladium
Nil: Standard
02: High dielectric strength type
Note: The designation name is stamped on the top of the relay case as follows:
(Example) Designation ordered: FBR21H05-P
Stamp: 21H05-P
1
FBR20H SERIES
■ SAFETY STANDARD AND FILE NUMBERS
UL114 (File No. E63615)
Nominal voltage
Contact rating
1 A 24 VDC resistive
1.5 to 24 VDC
0.5 A 30 VAC resistive
■ SPECIFICATIONS
Item
Single contact type
1 form C (SPDT)
Gold-overlay silver-palladium
Bifurcated contact type
Contact
Arrangement
Material
Resistance (initial)
Maximum 100 mΩ (at 0.1 A 6 VDC)
Rating (resistive)
0.5 A 120 VAC or 1 A 24 VDC (resistive load)
Maximum Carrying Current
Maximum Switching Power
Maximum Switching Voltage*1
Maximum Switching Current
2 A
60 VA or 24 W
125 V
1 A
Minimum Switching Load*2
(reference)
Plastic sealed 1 mA 1 V
Flux free 1 mA 5 V
Plastic sealed 100 µA 0.1 VDC
Flux free 1 mA 1 VDC
Capacitance
(reference)
Approximately 2 pF (between coil and contact)
Approximately 1 pF (between open contacts)
Coil
Nominal Power (at 20°C)
Operate Power (at 20°C)
Operating Temperature
Operating Humidity
Approximately 0.2 W to 0.25 W (24 V coil)
Approximately 0.112 W to 0.14 W maximum (24 V coil)
–30°C to +70°C (no frost) (refer to the CHARACTERISTIC DATA)
45 to 85%RH
Time Value Operate (at nominal voltage)
Release (at nominal voltage)
Maximum 5 ms
Maximum 2 ms
Insulation
Resistance (initial)
Minimum 100 MΩ (at 500 VDC)
Dielectric
Strength
500 VAC 1 minute (standard)
1,000 VAC 1 minute (high dielectric strength type)
between coil and contacts
between open contacts
500 VAC 1 minute
1.500 V
Surge Strength
(high dielectric strength type)
750 V
1,500 V (10 × 700 µs)
10 µs
700 µs
Life
Mechanical
5 × 106 operations minimum
Electrical
(refer to the REFERENCE DATA)
2 × 105 operations minimum (at contact rating)
Other
Vibration Resistance
10 to 55 Hz (double amplitude of 3.0 mm)
500 m/s2 (11±1 ms)
Shock
Misoperation
Endurance
Resistance
1,000 m/s2 (11±1 ms)
Weight
Approximately 1.7 g
1
*
If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the
type of load.
Values when switching a resistive load at normal room temperature and humidity, and in a clean environment. The mini-
mum switching load varies with the switching frequency and operation environment.
2
*
2
FBR20H SERIES
■ COIL DATA CHART
MODEL
Nominal
current
Coil
Must
Must
Maximum
Coil
temperature
rise
Nominal
voltage
Nominal
power
Single contact type
Flux free
Bifurcated contact type
Flux free
resistance (at nominal operate
release allowable
±10%
voltage)
approx.
voltage
voltage
voltage
Plastic sealed
Plastic sealed
FBR21H01-P FBR21NH01-P FBR22H01-P FBR22NH01-P 1.5 VDC
11 Ω
45 Ω
136 mA
67 mA
40 mA
FBR21H03-P FBR21NH03-P FBR22H03-P FBR22NH03-P
FBR21H05-P FBR21NH05-P FBR22H05-P FBR22NH05-P
FBR21H06-P FBR21NH06-P FBR22H06-P FBR22NH06-P
FBR21H09-P FBR21NH09-P FBR22H09-P FBR22NH09-P
FBR21H12-P FBR21NH12-P FBR22H12-P FBR22NH12-P
FBR21H18-P FBR21NH18-P FBR22H18-P FBR22NH18-P
FBR21H24-P FBR21NH24-P FBR22H24-P FBR22NH24-P
3 VDC
5 VDC
125 Ω
180 Ω
405 Ω
720 Ω
1,620 Ω
2,300 Ω
75% max. 10% min.
200% of
Approx.
200 mW
Approx.
35 deg
6 VDC
33 mA of nominal of nominal nominal
voltage
voltage
voltage (at nominal (at nominal
9 VDC
22 mA
17 mA
11 mA
10 mA
voltage)
voltage)
12 VDC
18 VDC
24 VDC
180%
250 mW
40 deg
Note: All values in the table are measured at 20°C.
■ CHARACTERISTIC DATA
Life curve
Maximum switching capacity
(x104)
200
Range of operation temperature and voltage
➀AC resistive load
(DATA)
assumes that the
maximum allowable
temperature of E
type insulation
coil is 115˚C
(
AC contact rating)
➁DC resistive load
DC contact rating)
100
160
2.0
1.0
➁
(
150
50
30
140
130
120
110
100
90
➀
24 V DC
resistive load
➀
0.5
10
5
➁
0.3
0.2
Operating voltage range
120 V AC
80
resistive load
70
0.1
–10
0 10 20 30 40 50 60 70 80
1
10
20 30 50
120 200
Operating temperature (˚C)
0
0.5
1
1.5
2
2.5
Contact load voltage (V)
Contact load current (A)
■ REFERENCE DATA
Distribution of Operate & Release Voltage
Distribution of Operate & Release Time
Distribution of Contact Resistance
80
60
40
20
0
100
60
Operate
Operate
Release
80
Release
50
40
30
20
10
0
60
40
20
0
0
10 20
30 40 50 60 70 80
0
1
2
3
4
5
6
7
8
0
10 20
30 40 50 60 70 80
Rated coil voltage multiplying factor (%)
Time (ms)
Contact Resistance (mΩ)
3
FBR20H SERIES
■ DIMENSIONS
●PC board mounting hole layout (BOTTOM VIEW)
●Dimensions
Flux free type
9.8+0.2
5.08
2.54
6–ø0.8
7.4+0.2
●Schematics (BOTTOM VIEW)
1
2
4
(1.2 Max.)
(1.3 Max.)
2.54 5.08
5.08
8
7
5
Plastic sealed type
10.7+0.2
8.2+0.2
(1.7 Max.)
(1.7 Max.)
2.54 5.08
5.08
●Tube carrier
10.8 Max.
520 Max.
Flux free type:50 pcs/Tube
Plastic sealed type:40 pcs/Tube
Europe
Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
Fujitsu Component Limited
Gotanda-Chuo Building
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: www.fceu.fujitsu.com
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
Fujitsu Components
International
Headquarter
Offices
Asia Pacific
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 375-8560
Fax: (1-408) 745-4970
Fax: (65) 273-3021
Email: fcal@fcal.fujitsu.com
www.fcal.fujitsu.com
Email: marcom@fcai.fujitsu.com
Web: www.fcai.fujitsu.com
© 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks
of their respective owners. Rev. 03/2002
4
相关型号:
©2020 ICPDF网 联系我们和版权申明