FCN-087P176-G/101-BCR [FUJITSU]
CONNECTOR, 176 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, PRESS FIT, PLUG;型号: | FCN-087P176-G/101-BCR |
厂家: | FUJITSU |
描述: | CONNECTOR, 176 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, PRESS FIT, PLUG |
文件: | 总5页 (文件大小:572K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
2mm PITCH METRIC CONNECTORS
FOR PCB CONNECTION
FCN-086 /087 SERIES
■ OVERVIEW
Fujitsu’s 2mm hard metric connector F-PACK-3 (FCN-086/087 series) are connectors for connecting boards
developed to support high-speed transmission/high density packaging of communication equipment,
conforms to IEC 917 (DIN 43355) and IEC 61076-4-101, and supports compact PCI. Product meets Bellcor
1217. To support high-speed transmission, these connectors implement low inductance, low cross-talk, and
matching characteristic impedance (50 ohms), exhibiting superb transmission characteristics.
Connection with the PCB is solderless (press fit) for both the plug/socket side, making mounting cost
effective. Insertion connections are completely unnecessary since a polarity key is supported.
Plug contact has a four level sequence structure that makes connection/disconnection in an active state
possible. Terminals have a five level pin length to support various applications. New customized connectors
can be supported by freely combining the pin lengths of contacts and terminals.
For shield plate products, which support high-speed transmission based on standard products, 5 row 55,
95, 110, 110 (with key) and 125 contact, plugs support 77, 133, 154 and 175 contacts. The shield plate
corresponds to the respective number of contacts, and the standard is post attachment. Sockets can also
be shipped with shields pre-attached.
8 row products are also in the series. Consult factory for your requirements.
Fujitsu has developed a new high density power connector (25% denser) to improve operability.
A double press fit, which can connect two printed boards with one connector, greatly contributes to
improved mounting and decreasing cost. Consult factory for details.
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
1
FCN-086/ 087 Series
■ SPECIFICATIONS
Specification
Item
Standard connector
Power connector
-40˚ C to +85˚ C
Operating temperature range -55˚ C to +125˚ C
Current rating
1A DC max. (75˚ C)
500V AC r.m.s
7A DC/contact max. (75˚ C)
56V DC
Voltage rating
Contact resistance
Insulation resistance
Dielectric strength
Insertion/Withdrawl life
Insertion force
20mohms max. (DC 20mV,10mA) 20mohms max. (DC 20mV, 10mA)
10,000 Mohms min. (100V DC)
750V AC for 1 minute
125 times
10,000 Mohms min. (100V DC)
600V AC for 1 minute
250 times
0.75N/pin min.
20N/connector max.
1N/connector min.
Withdrawl force
0.15N/pin min.
■ MATERIALS
■ CHARACTERISTICS
Material
Polyester resin (UL94V-0)
Copper alloy
Item
Material
Item
Insulator
Characteristic impedance 50 ohms
Conductor
Plating
Transmission speed
Near end cross talk
300 MHz
Press fit: Solder
4.3 % max.
Press fit other: PAGOS
Contact area: Gold (PAGOS)
Lead / press fit area: Solder
■ CONFIGURATION OF F&T 2 MM H.M. CONNECTOR
1. Basic configuration of socket/plug
There are five types of sockets: three basic types: type A (110 contacts), type B (125 contacts), and type C (55
contacts), and a 110 contact and 95 contact types. Many coding keys are in the series to prevent insertion errors.
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
2
FCN-086 / 087 Series
■ TRANSMISSION CHARACTERISTICS
The transmission characteristics were designed to an optimum level by repeating various transmission
characteristics simulations when the structure was designed, so as to improve the transmission character-
istics of this connector. The characteristic impedance and the measurement device of the connector are
shown below.
Measurement Point
Measurement Result
Fujitsu Components
a
b
c
At Start
100 ps
300 ps
500 ps
1 ns
d
Frequency: Hz
1.75 GHz
580 MHz
350 MHz
175 MHz
e
Ω
Characteristic Impedance (
Near/Far end cross talk: %
)
45.3 to 64.0 48.2 to 56.8 49.2 to 54.6 49.3 to 52.8
Ground
Not connected
1.96/1.14
1.49/0.78
1.06/0.51
0.71/0.27
Measurement signal
Other Supplier
At Start
100 ps
300 ps
500 ps
1 ns
Frequency: Hz
1.75 GHz
580 MHz
350 MHz
175 MHz
Ω
Characteristic Impedance (
Near/Far end cross talk: %
)
47.4 to 66.1 48.2 to 56.8 49.5 to 59.2 47.7 to 53.5
2.24/1.41
1.57/0.98
1.14/0.67
0.78/0.35
300.0m
Delay Time
signal
10.00m
V/Div.
Characteristic
Impedance
in
out
200.0m
49.00n
50.00n
100.0p S/Div
PC board part
PC board part PC board part
1.Measurement voltage: Vin = 5.0V
2.Rise time: Tr = 100ps, 300ps, 500ps, 1ns
3.Measurement device: TDR measurement device CSA803 and SD24 (Tektronix)
4.Measurement system
Coaxial cable for measurement
Ω
50 termination connector
Plug
Socket
CSA 80.3
SD 24
Measurement board
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
3
FCN-086/ 087 Series
WARNING: Please consult
Factory for Technical
Assistance
8 ROW PLUG WITH 88 CONTACTS
■ MOUNTING HOLE LAYOUT
■ DIMENSIONS
+0
24.95
-0.1
2x(8-1)=14(0.551)
2(0.079)
+0
(0.982
)
-0.004
23±0.05
(0.906±0.002)
2 x (11-1) = 20±0.05
(0.787±0.002)
2 ±0.05(.079±0.002)
+0.1
0
Ø2
+0.004
(Ø.079
)
0
2(0.079)
2(0.079)
2x(11-1)=20(0.787)
23(0.906)
14(0.551)
88-Ø0.6±0.05
(0.024±0.002)
Unit: mm (in.)
Unit: mm (in.)
E.g.: If 'Type A" contacts are inserted
into all rows 'a to h', *** should be
101.
■ ORDERING PART NUMBER: FCN-087P088-G/***-BCR
Minimum package quanity: 20 pieces; minimum ordering
quantity: 600 pieces
8 ROW PLUG WITH 176 CONTACTS
■ DIMENSIONS
■ MOUNTING HOLE LAYOUT
+0
49.9
-0.1
)
+0
(1.965-0.004
48±0.05
(1.890±0.002)
2x(8-1)=14(0.551)
2x(11-1)=20±0.05
2x(11-1)=20±0.05
(0.787±0.002)
2(0.079)
(0.787±0.002)
2±0.05(0.079±0.002)
2±0.05(0.079±0.002)
Ø2.5±0.1
(0.098±0.004)
176-ø0.6±0.05
(0.024±0.002)
2(0.079)
2(0.079)
2x(11-1)=20(0.787)
48(1.890)
2(0.079)
2x(11-1)=20(0.787)
14(0.551)
+0.1
0
Ø2
+0.004
0
Unit: mm (in.)
(Ø.079
)
Unit: mm (in.)
E.g.: In case of inserting 'Type A"
contact into all rows 'a to h', ***
should be 101
■ ORDERING PART NUMBER: FCN-087P176-G/***-BCR
Minimum package quanity: 10 pieces, minimum ordering quantity:
500 pieces
Specifications
Dimensions are in millimeters (inches)
subject to change
www.fcai.fujitsu.com
4
FCN-086 / 087 Series
Europe
Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components
International
Headquarter
Offices
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: www.fceu.fujitsu.com
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
Asia Pacific
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (1-408) 745-4970
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
www.fcal.fujitsu.com
Email: marcom@fcai.fujitsu.com
Web: www.fcai.fujitsu.com
© 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks
of their respective owners. Rev. 06/2002
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
5
相关型号:
FCN-214J030-G/O
HEADER CONNECTOR,PCB MNT,PLUG,30 CONTACTS,SKT,0.05 PITCH,PC TAIL TERMINAL,HOLE .099-.111
FUJITSU
FCN-214J034-G/A-HN
Board Connector, 34 Contact(s), 2 Row(s), Female, Straight, 0.05 inch Pitch, Solder Terminal, Plug
FUJITSU
FCN-214J034-G/O
HEADER CONNECTOR,PCB MNT,PLUG,34 CONTACTS,SKT,0.05 PITCH,PC TAIL TERMINAL,HOLE .099-.111
FUJITSU
©2020 ICPDF网 联系我们和版权申明