FTR-C1GB005G-1 [FUJITSU]
Power/Signal Relay, POWER/SIGNAL RELAY, DPDT, LATCHED, 0.028A (COIL), 5VDC (COIL), 140mW (COIL), 1A (CONTACT), 220VDC (CONTACT), SURFACE MOUNT-STRAIGHT, ROHS COMPLIANT;型号: | FTR-C1GB005G-1 |
厂家: | FUJITSU |
描述: | Power/Signal Relay, POWER/SIGNAL RELAY, DPDT, LATCHED, 0.028A (COIL), 5VDC (COIL), 140mW (COIL), 1A (CONTACT), 220VDC (CONTACT), SURFACE MOUNT-STRAIGHT, ROHS COMPLIANT 光电二极管 |
文件: | 总8页 (文件大小:439K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ULTRA MINIATURE RELAY
SIGNAL RELAY
FTR-C1 Series
RoHS compliant
n FEATURES
lꢀDimensions of large contact gap relay
Height:
9.3 mm maximum (THT)
9.65 mm maximum (SMT)
ꢀ5 mm maximum
Length:
Width:
7.5 mm maximum
lꢀConforms to IEC60950 / EN60950 / ULꢀ950/ C22.2
No.950 spacing & high breakdown voltage
Clearance:
Creepage:
2.0 mm ( coil and contacts)
2.5 mm ( coil and contacts)
lꢀHIGH RELIABILITY
Bifurcated contacts
lꢀLow power consumption 280 mW (latching type
ꢀ40mW)
lꢀRoHS Compliant since beginning of production
n ORDERING INFORMATION
FTR-Cꢀ
C
A
0ꢀ2 G-(B05)*
[Example]
(a)
(b) (c) (d) (e) (f)
(a)
(b)
Series Name
FTR-C1
Terminal
Appearance
C: Through hole type
G: Surface mount type
A: Standard Type
B: Single coil latching type
(c)
Operation Function
(d)
(e)
Coil Number
Nominal Voltage
G: Silver alloy
Contact Material
Remarks: Actual marking on relay would not carry code FTR and be as below:
Ordering code
Actual marking
FTR-C1CA03G
→
C1CA03G
* If ordering tape and reel package, please add “B05” after the partnumber (tape and reel is only available for
SMT type, example: FTR-CꢀGA003G-B05
ꢀ
FTR-C1 Series
n
COIL DATA CHART
Standard type
Nominal
Operating
Power
Coil
Must
Must
Release
Voltage
Model
Nominal
Voltage
Resistance Operate
(±10%)
Voltage
(±10%)
THT
SMT
FTR-C1CA003G
FTR-C1CA4.5G
FTR-C1CA005G
FTR-C1CA012G
FTR-C1CA024G
FTR-C1GA003G
FTR-C1GA4.5G
FTR-C1GA005G
FTR-C1GA012G
FTR-C1GA024G
3 VDC
4.5 VDC
5 VDC
32.1Ω
2.25 VDC 0.3 VDC
280 mW
Ω
Ω
72.3
89.3
514
3.38 VDC 0.45 VDC 280 mW
3.75 VDC 0.5 VDC
9.00 VDC 1.2 VDC
18.0 VDC 2.4 VDC
280 mW
280 mW
300 mW
Ω
12VDC
24VDC
Ω
1920
Note: All values in the table are measured at 20˚C.
Single coil latching type
Nominal
Operating
Power
Coil
Resistance
(±10%)
Model
Nominal
Voltage
Set
Voltage
Reset
Voltage
(±10%)
THT
SMT
Ω
FTR-C1CB003G
FTR-C1CB4.5G
FTR-C1CB005G
FTR-C1CB012G
FTR-C1CB024G
FTR-C1GB003G
FTR-C1GB4.5G
FTR-C1GB005G
FTR-C1GB012G
FTR-C1GB024G
3 VDC
4.5 VDC
5 VDC
64
2.25 VDC 2.25 VDC 140 mW
3.38 VDC 3.38 VDC 140 mW
3.75 VDC 3.75 VDC 140 mW
9.00 VDC 9.00 VDC 140 mW
18.0 VDC 18.0 VDC 180 mW
Ω
145
179Ω
Ω
12VDC
24VDC
1029
3200
Ω
Note: - All values in the table are measured at 20˚C.
- Single coil latching type is applying to the standard now.
2
FTR-C1 Series
n
SPECIFICATIONS
FTR-C1CA ( )G
FTR-C1GA ( )G
Item
Arrangement
2 Form C
Material
Silver alloy
Resistance (initial)
Max. 100m ohm (at 1A 6VDC)
37.5AV / 30W
Contact
Max. Switching Power
Max. Switching Voltage
Max. Switching Current
Operating Temperature
Max. Allowable Voltage
Operate Time
250VAC, 220 VDC
1 A
-40˚ C to + 85˚ C (no frost)
150% nominal voltage (at 20˚ C)
Max. 10ms (at nominal voltage, without bounce)
Max. 10ms (at nominal voltage, without bounce)
Min. 1,000M ohm S
Coil
Time Value
Release Time (without diode)
Resistance (at 500 VDC)
Between open contacts
1,500VAC, 1 minute
Dieelectric
Strenght
Between adjacent contacts 1,500VAC, 1 minute
Between coil and contacts 3,000VAC, 1 minute
Between open contacts 2,500V (at 2/10 microsec)
Insulation
Surge
Strength
Between adjacent contacts 2,500V (at 2/10 microsec)
Between coil and contacts 5,000V (at 2/10 microsec)
10x106 operations min. (at 10Hz)
Mechanical
100x103 operations min. at 1A, 30VDC, 0.5Hz
100x103 operations min. at 0.1A, 48VDC, 0.5Hz
100x103 operations min. at 0.3A, 125VDC, 0.5Hz
Life
Electrical (resistive load)
Misoperation
Endurance
Misoperation
Endurance
10 to 55 Hz at double amplitude of 3.3 mm
10 to 55 Hz at double amplitude of 5 mm
Min. 500 m/s2
Vibration
Resistance
Shock
Resistance
2
Min. 1,000 m/ s
0.3A 125 VAC
1A 30VDC
UL / CSA
Contact Rating
0.3 110VDC
Insulation Class
Working Voltage
Pollution Degree
Clearance
Supplementary Insulation
IEC060950
UL1950
C22.2
No.950
EN60950
250 V
2
2.0 mm (between coil and contacts)
2.5 mm (between coil and contacts)
Creepage Distance
3
FTR-C1 Series
n
DIMENSIONS AND SCHEMATICS
Through hole type
Polarity Bar
F.T. CꢀCA003G
Japan 003ꢀK
ꢀ4.9 ±0.ꢀ
Unit: mm
5.08 ±0.3
(1.1)
(1.16)
5.08 ±0.3
2.54±0.3
2.54±0.3
n
RECOMMENDED MOUNTING PAD
n
TERMINAL DESIGNATIONS
+0.1
8-O 0.8
-0.05
Standard type
(Bottom view de-energized position)
4
5
8
3
(+) 1
(-) 12
10
9
Polarity Bar
(1.1)
5.08 ±0.1
Single Coil Latching type
(Bottom view reset position)
2.54±0.1
2.54±0.1
4
5
3
(+) (-) 1
S R
S shows the polarity of set positin
R shows the polarity of reset position
(+)..(+) 12
10
9
8
Unit: mm
Polarity Bar
4
FTR-C1 Series
n
DIMENSIONS AND SCHEMATICS
Surface mount type
Polarity Bar
F.T. C1GA003G
Japan 0031K
14.9 ± 0.1
(1.1)
5.08 ±0.3
2.54±0.3
2.54±0.3
3o±2o
5.08 ±0.3
Unit: mm
9.4+0.3
n
TERMINAL DESIGNATIONS
n
RECOMMENDED MOUNTING PAD
Standard type
1±0.1
(Top view de-energized position)
1±0.1
1±0.1
9
8
10
(-) 12
(+) 1
3
5
4
Polarity Bar
Single Coil Latching type
(Bottom view reset position)
5.08 ±0.1
2.54±0.1
2.54±0.1
10
9
8
5
(-) (+) 12
S R
S shows the polarity of set positin
R shows the polarity of reset position
(+) (-) 1
3
4
Unit: mm
Polarity Bar
5
FTR-C1 Series
n RECOMMENDED SOLDERING CONDITIONS
(TEMPERATURE PROFILE)
IRS (Infrared Reflow Soldering)
Note: 1.Temperature profiles show the tempera-
ture of PC board surface.
soldering
T
T
T
3
2
1
T
T
T
3
2
1
= 245C max.
= 200C max.
= 165C max.
2. Please perform soldering test with your
actual PC board before mass produc-
tion, since the temperatures of PC
board surfaces vary according to the
size of PC board, status of parts
cooling
preheating
mounting and heating method.
0
30 sec
Max.
120 sec maximum
n PACKAGING
Packaging method (only tape packaging is available)
ꢀ. Taping standards:
JIS C 0806 and
RC-ꢀ0092B (EIAJ)
TB24ꢀ6 or TB24ꢀ6
RD24D
Orientation
Mark side
Feedin
2. Reel type:
3. Reel type:
4. Quantity of ꢀ reel:
500 pieces
Tape Dimensions:
+0.1
-0
O1.5
0.4
4 ±0.1
O 2.2
12.5
10.7
16±0.1
2±0.1
Reel Dimensions:
2±0.5
O 13±0.5
O 21±0.8
Unit: mm
25.5+0.1
MAX. 2.0
O 370
6
FTR-C1 Series
RoHS Compliance and Lead Free Relay Information
1. General Information
l
Relays produced after the specific date code that is indicated on each data sheet are lead-free
now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)
Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu.
All signal and most power relays also comply with RoHS. Please refer to individual data
sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE).
It has been verified that using lead-free relays in leaded assembly process will not cause any
problems (compatible).
l
l
l
l
l
“LF” is marked on each outer and inner carton. (No marking on individual relays).
To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office.
lꢀ We will ship leaded relays as long as the leaded relay inventory exists.
Note: Cadmium was exempted from RoHS on October 2ꢀ, 2005. (Amendment to Directive 2002/95/EC)
2. Recommended Lead Free Solder Profile
lꢀ Recommended solder paste Sn-3.0Ag-0.5Cu amd Sm-3.0 Cu-Ni (only FTR-B3 and FTR-B4 from
February 2005.
Reflow Solder condtion for SMT
Flow Solder condtion:
Peak Temp.: max. 250°C
Soldering
Pre-heating:
maximum 120˚C
dip within 5 sec. at
260˚C soler bath
Soldering:
250
220
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Cooling
Duration:
maximum 3 sec.
Pre-heating
ꢀ70
ꢀ30
20~30 sec.
90~ꢀ20 sec.
(duration)
max. ꢀ20 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
lꢀMoisture Sensitivity Level standard is not applicable to electromechanical realys.
4. Tin Whisker
lꢀSnAgCu and SnCuNi solder is known as low risk of tin whisker. No considerable length whisker was found
by our in-house test.
7
FTR-C1 Series
Fujitsu Components International Headquarter Offices
Japan
Europe
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo ꢀ4ꢀ, Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2ꢀ32 WV Hoofddorp
Netherlands
Tel: (8ꢀ-3) 5449-70ꢀ0
Tel: (3ꢀ-23) 55609ꢀ0
Fax: (8ꢀ-3) 5449-2626
Fax: (3ꢀ-23) 5560950
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
Email: info@fceu.fujitsu.com
Web: http://www.fujitsu.com/emea/services/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (ꢀ-408) 745-4900
Asia Pacific
Fujitsu Components Asia Ltd.
ꢀ02E Pasir Panjang Road
#04-0ꢀ Citilink Warehouse Complex
Singapore ꢀꢀ8529
Fax: (ꢀ-408) 745-4970
Tel: (65) 6375-8560
Email: components@us.fujitsu.com
Web: http://us.fujitsu.com/components/
Fax: (65) 6273-302ꢀ
Email: fcal@fcal.fujitsu.com
Web: http://www.fujitsu.com/sg/services/micro/components/
©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective
owners.
Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu
Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Rev. April 13, 2007
8
相关型号:
FTR-C1GB005G-B05
Power/Signal Relay, DPDT, Latched, 0.028A (Coil), 5VDC (Coil), 140mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Surface Mount-Right Angle, ROHS COMPLIANT
FUJITSU
FTR-C1GB024G
Power/Signal Relay, DPDT, Latched, 0.008A (Coil), 24VDC (Coil), 180mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Surface Mount-Right Angle, ROHS COMPLIANT
FUJITSU
FTR-C1GB024G-1
Power/Signal Relay, POWER/SIGNAL RELAY, DPDT, LATCHED, 0.008A (COIL), 24VDC (COIL), 180mW (COIL), 1A (CONTACT), 220VDC (CONTACT), SURFACE MOUNT-STRAIGHT, ROHS COMPLIANT
FUJITSU
FTR-C1GB4.5G
Power/Signal Relay, DPDT, Latched, 0.031A (Coil), 4.5VDC (Coil), 140mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Surface Mount-Right Angle, ROHS COMPLIANT
FUJITSU
FTR-C1GB4.5G-1
Power/Signal Relay, POWER/SIGNAL RELAY, DPDT, LATCHED, 0.031A (COIL), 4.5VDC (COIL), 140mW (COIL), 1A (CONTACT), 220VDC (CONTACT), SURFACE MOUNT-STRAIGHT, ROHS COMPLIANT
FUJITSU
FTR-C1SA012G-B05
Power/Signal Relay, DPDT, Momentary, 0.023A (Coil), 12VDC (Coil), 280mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Surface Mount-Right Angle, ROHS COMPLIANT
FUJITSU
FTR-C1SA024G
Power/Signal Relay, DPDT, Momentary, 0.013A (Coil), 24VDC (Coil), 300mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Surface Mount-Right Angle, ROHS COMPLIANT
FUJITSU
©2020 ICPDF网 联系我们和版权申明