FTR-C2CA005GB05 [FUJITSU]
ULTRA MINIATURE RELAY SIGNAL RELAY; 超小型继电器信号继电器
| 型号： | FTR-C2CA005GB05 |
| 厂家： | 
FUJITSU |
| 描述： | ULTRA MINIATURE RELAY SIGNAL RELAY |
| 文件： | 总8页 (文件大小：542K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
ULTRA MINIATURE RELAY
SIGNAL RELAY
RoHS compliant
FTR-C2 Series
n FEATURES
lꢀDimensions of large contact gap relay
Height:
ꢀꢀ.8 mm maximum (THT)
ꢀ2 mm maximum (SMT)
20.2 mm maximum
Length:
Width:
ꢀ0 mm maximum
lꢀConforms to IEC60950 / EN60950 / ULꢀ950/ CSA C22.2
No.950 spacing & high breakdown voltage
lꢀRecognized by UL/CSA and Bsi
UL: File E636ꢀ5 Vol. 2 Sec.4
ꢀ
CSA:ꢀMasterꢀcontractꢀ169663ꢀCertificateꢀ1088921ꢀ
Clearance:
Creepage:
2.0 mm (between open contacts,
coil and contacts, contact sets)
2.0 mm (between open contacts,
coil and contacts, contact sets)
lꢀHIGH RELIABILITY
Bifurcated contacts
lꢀLow power consumption 300 mV
lꢀRoHS Compliant since production
n ORDERING INFORMATION
FTR-C2
C
A
0ꢀ2 G -B 05*
[Example]
(a)
(b) (c) (d) (e) (f) (g)
(a)
(b)
Series Name
FTR-C2
C: Through hole type
G: Surface mount type
Termianl Apprearance
A: Standard type
B: Latching type
(c)
Operation Function
(d)
(e)
(f)
Coil Number
Nominal Voltage
Contact Material
Relay enclosing direction
G: Silver alloy
B: standard enclosing direction
(g)
Number of relays per reel 05: 500 (standard)
Remarks: Actual marking on relay would not carry code FTR and be as below:
Ordering code
Actual marking
FTR-C2CA03Gꢀꢀꢀꢀꢀꢀꢀꢀꢀ→ꢀ ꢀ
*only SMT version
C2CA03Gꢀ
ꢀ
FTR-C2 Series
n
COIL DATA CHART
Standard type
Nominal
Operating
Power
Coil
Resistance
(±10%)
Nominal
Voltage
Must Operate Must Release
Model
Voltage
Voltage
(±10%)
Ω
Ω
FTR-C2 ( ) A003G
FTR-C2 ( ) A005G
FTR-C2 ( ) A012G
FTR-C2 ( ) A024G
3 VDC
5 VDC
12VDC
30.0
83.3
2.25 VDC
3.75 VDC
9.00 VDC
18.00 VDC
0.3 VDC
0.5 VDC
1.2 VDC
2.4 VDC
300 mW
300 mW
300 mW
300 mW
Ω
480.0
Ω
24 VDC 1,920.0
Single coil latching type
Nominal
Operating
Power
Coil
Resistance
(±10%)
Nominal
Voltage
Model
Set Voltage Reset Voltage
(±10%)
Ω
Ω
FTR-C2 ( ) B003G
FTR-C2 ( ) B005G
FTR-C2 ( ) B0012G
FTR-C2 ( ) B024G
3 VDC
5 VDC
12VDC
60.0
2.25 VDC
3.75 VDC
9.00 VDC
18.00 VDC
2.25 VDC
3.75 VDC
9.00 VDC
18.00 VDC
150 mW
150 mW
150 mW
150 mW
Ω
Ω
167.0
960.0
Ω
24 VDC 3,840.0
Note:ꢀAllꢀvaluesꢀinꢀtheꢀtableꢀareꢀmeasuredꢀatꢀ20˚C.
2
FTR-C2 Series
n
SPECIFICATIONS
FTR-C2CA ( )G
FTR-C2GA-( )G
Item
Arrangement
2 Form C
Material
Silver alloy
Resistance (initial)
Max. 150m ohm (at 1A 6VDC)
37.5AV / 30W
Contact
Max. Switching Power
Max. Switching Voltage
Max. Switching Current
Operating Temperature
Max. Allowable Voltage
Operate Time
250VAC, 220 VDC
1 A
-40˚ C to + 85˚ C (no frost)
150% nominal voltage (at 20˚ C)
Max. 15ms (at nominal voltage, without bounce
Max. 15ms (at nominal voltage, without bounce
Min. 1,000M ohm
Coil
Time Value
Release Time (without diode)
Resistance (at 500 VDC)
Between open contacts
1,500VAC, 1 minute
Dieelectric
Strenght
Between adjacent contacts 1,500VAC, 1 minute
Between coil and contacts 2,000VAC, 1 minute
Between open contacts 2,500V (at10/700micros)
Insulation
Surge
Strength
Between adjacent contacts 2,500V (at10/700micros)
Between coil and contacts 2,500V (at10/700micros)
10x106 operations min. (at 10Hz)
Mechanical
100x103 operations min. at 1A, 30VDC, 0.5Hz
100x103 operations min. at 0.1A, 48VDC, 0.5Hz
100x103 operations min. at 0.3A, 125VDC, 0.5Hz
Life
Electrical (resistive load)
Misoperation
Endurance
Misoperation
Endurance
10 to 55 Hz at double amplitude of 3.3 mm
10 to 55 Hz at double amplitude of 5 mm
Min. 300 m/s2
Vibration
Resistance
Shock
Resistance
Min. 1,000 m/s2
0.3A 125 VAC
1A 30VDC
UL / CSA
Contact Rating
0.3 110VDC
Insulation Class
Working Voltage
Pollution Degree
Clearance
Supplementary Insulation
250 V
IEC060950
UL1950
C22.2
No.950
EN60950
2 (outside)
1 (inside)
2.0 mm (outside)
2.5 mm (outside)
2.0 mm (inside)
2.0 mm (inside)
Creepage Distance
3
FTR-C2 Series
n
DIMENSIONS AND SCHEMATICS
Through hole type
(1.115)
7.62 ±0.3
(1.135)
7.62 ±0.3
5.08 ±0.3
Unit: mm
5.08 ±0.3
n
TERMINAL DESIGNATIONS
n
RECOMMENDED MOUNTING PAD
(Bottom view de-energized position)
8-O 0.9±0.1
(1.135)
7.62 ±0.1
5.08 ±0.1
5.08 ±0.1
Polarity bar
Single Coil Latching Type
(Bottom view reset position)
S R
Polarity bar
S: shows polarity of set position
R: shows polarity of reset position
Unit: mm
4
FTR-C2 Series
n
DIMENSIONS AND SCHEMATICS
Surface mount type
(1.135)
7.62 ±0.3
5.08 ±0.3
7.62 ±0.3
10.8 ±0.3
5.08 ±0.3
Unit: mm
n
TERMINAL DESIGNATIONS
n
RECOMMENDED MOUNTING
(Top view de-energized position)
1 ±0.1
1 ±0.1
1 ±0.1
1 ±0.1
7.62 ±0.1
5.08 ±0.1
Polarity bar
5.08 ±0.1
Single Coil Latching Type
(Top view reset position)
S R
Polarity bar
S: shows polarity of set position
R: shows polarity of reset position
Unit: mm
5
FTR-C2 Series
n RECOMMENDED SOLDERING CONDITIONS
(TEMPERATURE PROFILE)
IRS (Infrared Reflow Soldering)
Note:ꢀꢀ 1.Temperatureꢀprofilesꢀshowꢀtheꢀtempera-ꢀ
ture of PC board surface.
soldering
T
T
T
3
2
1
T
T
T
3
2
1
= 245C max.
= 200C max.
= 165C max.
2. Please perform soldering test with your
actual PC board before mass produc-
tion, since the temperatures of PC
board surfaces vary according to the
size of PC board, status of parts
cooling
preheating
mounting and heating method.
0
30 sec
Max.
120 sec maximum
6
FTR-C2 Series
RoHS Compliance and Lead Free Relay Information
1. General Information
lꢀ Relaysꢀproducedꢀafterꢀtheꢀspecificꢀdateꢀcodeꢀthatꢀisꢀindicatedꢀonꢀeachꢀdataꢀsheetꢀareꢀlead-free
now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)
l
Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu.
l
All signal and most power relays also comply with RoHS. Please refer to individual data
sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE).
Itꢀhasꢀbeenꢀverifiedꢀthatꢀusingꢀlead-freeꢀrelaysꢀinꢀleadedꢀassemblyꢀprocessꢀwillꢀnotꢀcauseꢀanyꢀ
problems (compatible).
l
l
“LF” is marked on each outer and inner carton. (No marking on individual relays).
lꢀ Toꢀavoidꢀleadedꢀrelaysꢀ(forꢀlead-freeꢀsample,ꢀetc.)ꢀpleaseꢀconsultꢀwithꢀareaꢀsalesꢀoffice.ꢀꢀ
lꢀ We will ship leaded relays as long as the leaded relay inventory exists.
ꢀ
ꢀ
Note: Cadmium was exempted from RoHS on October 2ꢀ, 2005. (Amendment to Directive 2002/95/EC)
2. Recommended Lead Free Solder Profile
lꢀ Recommended solder paste Sn-3.0Ag-0.5Cu amd Sm-3.0 Cu-Ni (only FTR-B3 and FTR-B4 from
February 2005.
Reflow Solder condtion for SMT
Flow Solder condtion:
Pre-heating:ꢀ maximumꢀ120˚C
Peak Temp.: max. 250ꢀC
Soldering:
dip within 5 sec. at
260˚Cꢀsolerꢀbath
Soldering
250
220
ꢀ
ꢀ
Solder by Soldering Iron:
Soldering Iron
Temperature:ꢀ maximumꢀ360˚C
Cooling
Duration:
maximum 3 sec.
Pre-heating
ꢀꢁ0
ꢀ30
20~30 sec.
90~ꢀ20 sec.
(duration)
max. ꢀ20 sec.
Weꢀhighlyꢀrecommendꢀthatꢀyouꢀconfirmꢀyourꢀactualꢀsolderꢀconditions
3. Moisture Sensitivity
lꢀMoisture Sensitivity Level standard is not applicable to electromechanical realys.
4. Tin Whisker
lꢀSnAgCu and SnCuNi solder is known as low risk of tin whisker. No considerable length whisker was found
by our in-house test.
ꢁ
FTR-C2 Series
Fujitsu Components International Headquarter Offices
Japan
Europe
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo ꢀ4ꢀ, Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2ꢀ32 WV Hoofddorp
Netherlands
Tel: (8ꢀ-3) 5449-ꢁ0ꢀ0
Tel: (3ꢀ-23) 55609ꢀ0
Fax: (8ꢀ-3) 5449-2626
Fax: (3ꢀ-23) 5560950
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
Email: info@fceu.fujitsu.com
Web: http://www.fujitsu.com/emea/services/components/
North and South America
Asia Pacific
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (ꢀ-408) ꢁ45-4900
Fujitsu Components Asia Ltd.
ꢀ02E Pasir Panjang Road
#04-0ꢀ Citilink Warehouse Complex
Singapore ꢀꢀ8529
Fax: (ꢀ-408) ꢁ45-49ꢁ0
Tel: (65) 63ꢁ5-8560
Email: marcom@fcai.fujitsu.com
Web: http://www.fujitsu.com/us/services/edevices/components/
Fax: (65) 62ꢁ3-302ꢀ
Email: fcal@fcal.fujitsu.com
Web: http://www.fujitsu.com/sg/services/micro/components/
©2005 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective
owners.
Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu
ComponentsꢀAmerica,ꢀInc.ꢀreservesꢀtheꢀrightꢀtoꢀchangeꢀspecifications/datasheetsꢀwithoutꢀpriorꢀnotice.ꢀRev.ꢀ11/18/2005.
8
相关型号：
FTR-C2CA024G
Power/Signal Relay, DPDT, Momentary, 0.013A (Coil), 24VDC (Coil), 300mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
FUJITSU
FTR-C2CB02G
Power/Signal Relay, DPDT, Latched, 0.012A (Coil), 12VDC (Coil), 140mW (Coil), 1A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
FUJITSU
FTR-C2GA005G
Power/Signal Relay, DPDT, Momentary, 0.06A (Coil), 5VDC (Coil), 300mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Surface Mount-Straight, ROHS COMPLIANT
FUJITSU
©2020 ICPDF网 联系我们和版权申明