FTR-F4GAK024T [FUJITSU]
Power/Signal Relay, POWER/SIGNAL RELAY, DPST, MOMENTARY, 0.033A (COIL), 24VDC (COIL), 800mW (COIL), THROUGH HOLE-STRAIGHT MOUNT, CADMIUM FREE AND ROHS COMPLIANT;
| 型号： | FTR-F4GAK024T |
| 厂家： | 
FUJITSU |
| 描述： | Power/Signal Relay, POWER/SIGNAL RELAY, DPST, MOMENTARY, 0.033A (COIL), 24VDC (COIL), 800mW (COIL), THROUGH HOLE-STRAIGHT MOUNT, CADMIUM FREE AND ROHS COMPLIANT 继电器 |
| 文件： | 总6页 (文件大小：313K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
POWER RELAY
2 POLE - 5A - 1.5mm contact gap
FTR-F4G Series
n FEATURES
l 2 Pole, 5A
l 2 Form A
l Contact gap 1.5mm
l Sealed type available
l High insulation in small package
(between coil and contact)
- Insulation distance: min 8.0mm
- Dielectric strength: 5,000VAC
- Surge strength: 10,000V
l Flammability UL94V-0 (plastics)
l RoHS compliant
Features cadmium-free contacts
Please see page 5 for more information
n PARTNUMBER INFORMATION
FTR-F4G
(a)
A
K
012
T
-
KW
(f)
[Example]
(b) (c) (d) (e)
(a)
ꢀ (b)ꢀ
(c)
Relay type
FTR-F4G : FTR-F4G-Series
Contactꢀconfigurationꢀ
Coil type
Aꢀ
:ꢀ2ꢀformꢀA
K
: Standard type (0.8W)
(d)
Coil rated voltage
012
: 3.....60 VDC
Coil rating table at page 3
(e)
(f)
Contact material / TV rating
Optional type
T
: Silver alloy / TV-3 rating
Nil
KW
: Flux free type
: Plastic sealed type
Actual marking does not carry the type name : "FTR"
E.g.: Ordering code: FTR-F4GAK012T Actual marking: F4GAK012T
1
FTR-F4G SERIES
n SPECIFICATION
Item
FTR-F4G
FTR-F4G-KW
fluxꢀfreeꢀtype
plastic sealed type
Contact Data Configuration
2 form A
Material
Silver alloy
Resistance (initial)
Max.ꢀ100mΩꢀatꢀ1A,ꢀ6VDC
Contact rating
5A, 250VAC (resistive)
Max. carrying current
Max. switching current
Max. switching voltage
Max. switching power
Min. switching load (reference)
Mechanical
5A
5A
400VAC
1,250VA
100 mA, 5VDC
Min. 500 x 103 operations
Life
5A, 250VAC
Min. 20 x 103 operations
5A, 250VAC
250VAC, 250W
Electrical (resistive)
Min. 100 x 103 operations
Min. 100 x 103 operations
110VAC, 250W
Min. 100 x 103 operations
Coil Data
Rated power (at 20 °C)
Approximately 0.8W
-40 °C to +70 °C (no frost)
Max. 12ms (without bounce)
Max. 5ms (without bounce)
Minimum 1.5mm
Operating temperature range
Timing Data Operate (at nominal voltage)
Release (at nominal voltage)
Insulation
Contact gap (initial)
Resistance (initial)
Min.ꢀ1,000MΩꢀatꢀ500VDC
1,500VAC, 1min.
Open contacts
Contacts sets
Coil and contacts
Coil to contacts
Misoperation
Endurance
Dielectric strength
3,000VAC, 1min.
5,000VAC, 1min.
Surge strength
10,000V / 1.2 x 50µs standard wave
10 to 55Hz double amplitude 1.5 mm
10 to 55Hz double amplitude 1.5 mm
Min. 100m/s² (11 ± 1ms)
Other
Vibration resistance
Misoperation
Endurance
Shock resistance
Weight
Min. 1,000m/s² (6 ± 1ms)
Approximately 18 g
2
FTR-F4G SERIES
n COIL RATING
Rated Coil
Voltage
(VDC)
Must Operate
Voltage
Must Release
Voltage
Coil
Code
Coil Resistance
+/- 10% (Ohm)
Rated Power
(W)
(VDC) *
(VDC) *
003
005
006
009
012
018
024
048
060
3
5
11.3
31
2.1
3.5
0.15
0.25
0.3
6
45
4.2
9
101
180
405
720
2,880
4,500
6.3
0.45
0.6
Approx.
0.8
12
18
24
48
60
8.4
12.6
16.8
33.6
42.0
0.9
1.2
2.4
6.0
Note: All values in the table are valid for 20°C and zero contact current.
*ꢀSpecifiedꢀoperateꢀvaluesꢀareꢀvalidꢀforꢀpulseꢀwaveꢀvoltage.ꢀ
n SAFETY STANDARDS
Type
UL
Compliance
UL 508
Contact rating
5A, 277VAC, resistive
TV-3, 125VAC
C22.2 No.14 (cULus)
TUV
IEC/EN61810-1
EN60730-1
EN60335-1
EN60950-1
EN60065
5A, 250VAC (cosφ=1) 70°C
3 / 51A, 250VAC, 70°C
3
FTR-F4G SERIES
n CHARACTERISTIC DATA
Unit: mm
n DIMENSIONS
l
Dimensions
l
Schematics
(BOTTOM VIEW)
l
PC board mounting
hole layout
(BOTTOM VIEW)
4
FTR-F4G SERIES
RoHS Compliance and Lead Free Information
1. General Information
l
l
l
l
All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC including
amendments.
Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005.
(Amendment to Directive 2002/95/EC)
All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes
at: http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf
Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified.
This material has been verified to be compatible with PbSn assembly process.
2. Recommended Lead Free Solder Profile
l
Recommended solder Sn-3.0Ag-0.5Cu.
Flow Solder condition:
Pre-heating:ꢀ
Soldering:
maximumꢀ120˚C
dip within 5 sec. at
260˚Cꢀsolderꢀbath
ꢀ
ꢀ
Solder by Soldering Iron:
Soldering Iron
Temperature:ꢀ maximumꢀ360˚C
Duration:
maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated.
4. Tin Whiskers
l
Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length
whisker was found by our in house test.
5
FTR-F4G SERIES
Fujitsu Components International Headquarter Offices
Japan
Europe
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (81-3) 5449-7010
Tel: (31-23) 5560910
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
#01-01 Citilink Warehouse Complex
Singapore 118529
Fax: (1-408) 745-4970
Tel: (65) 6375-8560
Email: components@us.fujitsu.com
Web: http://us.fujitsu.com/components
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
Web: http://www.fujitsu.com/sg/services/micro/components/
©2011 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners.
The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general
information purposes.
The use of the contents, data and information provided in this datasheet is at the users’ own risk.
Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive,
complete and up to date.
FujitsuꢀComponentsꢀEuropeꢀB.V.ꢀandꢀaffiliatedꢀcompaniesꢀdoꢀhoweverꢀnotꢀacceptꢀanyꢀresponsibilityꢀorꢀliabilityꢀonꢀtheirꢀbehalf,ꢀnorꢀonꢀbehalfꢀofꢀitsꢀ
employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related
graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof.
NorꢀdoꢀFujitsuꢀComponentsꢀEuropeꢀB.V.ꢀandꢀaffiliatedꢀcompaniesꢀacceptꢀonꢀtheirꢀbehalf,ꢀnorꢀonꢀbehalfꢀofꢀitsꢀemployees,ꢀanyꢀresponsibilityꢀorꢀliabilityꢀ
forꢀanyꢀrepresentationꢀorꢀwarrantꢀofꢀanyꢀkind,ꢀexpressꢀorꢀimplied,ꢀincludingꢀwarrantiesꢀofꢀanyꢀkindꢀforꢀmerchantabilityꢀorꢀfitnessꢀforꢀparticularꢀuse,ꢀ
with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness,
usefulness, availability and completeness thereof. Rev. April 15, 2011
6
相关型号：
FTR-F4GAK048T-KW
Power/Signal Relay, POWER/SIGNAL RELAY, DPST, MOMENTARY, 0.017A (COIL), 48VDC (COIL), 800mW (COIL), THROUGH HOLE-STRAIGHT MOUNT, CADMIUM FREE AND ROHS COMPLIANT
FUJITSU
©2020 ICPDF网 联系我们和版权申明