FTR-K1AK024T [FUJITSU]
Power/Signal Relay, POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.017A (COIL), 24VDC (COIL), 400mW (COIL), 16A (CONTACT), 24VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT;
| 型号： | FTR-K1AK024T |
| 厂家： | 
FUJITSU |
| 描述： | Power/Signal Relay, POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.017A (COIL), 24VDC (COIL), 400mW (COIL), 16A (CONTACT), 24VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT 继电器 电视 |
| 文件： | 总7页 (文件大小：802K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
POWER RELAY
1 POLE - 16A 80A Inrush type
FTR-K1 Series
n FEATURES
l Peak 80A inrush current (1 form A type)
l Low profile (height: 15.7mm)
l HIGH INSULATION
Insulation distance (between coil and contacts): 10mm min.
Dielectric strength: 5KV
Surge strength: 10KV
l Class F coil wire
l Low coil power (400mW)
l Cadmium free contacts
l SAFETY STANDARDS
UL, CSA, VDE, SEMKO approved
UL, CSA TV-5 rating approved (1 form A type)
l Flux proof, RTII
l RoHS compliant
Please see page 6 for more information
n PARTNUMBER INFORMATION
FTR-K1
C
K
012 W - BG
[Example]
(a)
(b) (c) (d) (e) (f)
(a)
(b)
Relay type
FTR-K1: FTR-K1 Series
Contact configuration
A
C
: 1 form A (SPST-NO)
: 1 form C (SPDT) (standard type "K" only)
(c)
(d)
Coil type
K
: Standard type (400mW / Flux proof)
Coil rated voltage
012
: 5....110VDC
Coil rating table at page 3
(e)
(f)
Contact material / TV type
Special type
W
T
: AgSnO2 (1 form C contact type only)
: AgSnO2 / TV-5 rated (1 form A / TV-5 contact type only)
Nil
BG
: Standard type (without gold plate)
: Gold plated 3µm
Actual marking does not carry the type name : "FTR"
E.g.: Ordering code: FTR-K1CK012W Actual marking: K1CK012W
1
FTR-K1 SERIES
n SPECIFICATION
Item
FTR-K1 AK ( ) T
FTR-K1 CK ( ) W
Standard
Standard
1 form A
Single
Contact
Data
Configuration
1 form C
Construction
AgSnO2
Material
Resistance (initial)
Contact rating (resistive)
Max. carrying current *1
Max. inrush current
Max. switching voltage
Max. switching power
Min. switching load *2
Mechanical
Max. 100mOhm at 1A, 6VDC
16A, 250VAC / 24VDC
20A
80A (20ms) 250VAC (only make contact)
440VAC / 300VDC
4,000VA / 384W
100mA, 5VDC
Life
Min. 20 x 106 operations
Min. 100 x 103
operations
Min. 100 x 103
operations
AC contact rating
Min. 50 x 103 operations
Min. 30 x 103 operations
DC contact rating
Peak Inrush (80A)
Electrical
Min. 10 x 103 operations (only make contact)
Min. 25 x 103 operations
Lamp load (UL TV-5) Min. 25 x 103 operations
(only make contact)
Coil Data
Rated power (20 °C)
400mW (430mW at 48V coil)
200mW (210mW at 48V coil)
-40 °C to +85 °C (no frost)
Max. 15ms (without bounce)
Max. 5ms (without bounce, no diode)
Min. 1,000MOhm at 500VDC
1,000VAC (50/60Hz) 1min
5,000VAC (50/60Hz) 1min
10,000V / 1.2 x 50µs standard wave
10mm
Operate power (20 °C)
Operating temperature range
Timing Data Operate (at nominal voltage)
Release (at nominal voltage)
Insulation
Resistance (initial)
Open contacts
Contacts to coil
Coil to contacts
Dielectric strength
Surge strength
Clearance
Creepage
10mm
EN61810-1, VDE0435
Voltage
250V
Pollution degree
Material group
Category
3
III a
C / 250V (Reference voltage) (VDE0110b)
Other
Misoperation≥1us 10 to 55Hz double amplitude 0.7mm
Endurance 10 to 55Hz double amplitude 1.5mm
Misoperation≥1us 100m/s² (11 ± 1ms)
Vibration resistance
Shock
Endurance
1,000m/s² (6 ± 1ms)
Approximately 13g
Flux proof, RTII
Weight
Sealing
* 1: Need to consider the heat from PCB when max. current is more than 10A.
* 2: Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual
load before production since reference values may vary according to switching frequencies, environmental contions
2
FTR-K1 SERIES
n COIL RATING
Rated Coil
Coil
Must Operate Must Release-
Coil Resistance
+/- 10% (Ohm)
Max. Coil Voltage Rated Power
Voltage
Voltage
(VDC) *
Voltage
(VDC) *
Code
(VDC)
(mW)
400
(VDC)
005
006
009
012
018
022
024
028
048
060
110
5
6
62
90
3.5
4.2
0.5
0.6
0.9
1.2
1.8
2.2
2.4
2.8
4.8
6.0
11.0
12.2
14.7
22
9
202
6.3
12
18
22
24
28
48
60
110
360
8.4
29.4
44.1
53.9
58.8
68.6
117.6
147.0
269.5
810
12.6
15.4
16.8
19.6
33.6
42.0
77.0
1,210
1,440
1,960
5,360
8,570
28,800
430
420
Note: All values in the table are valid for 20°C and zero contact current.
* Specified operate values are valid for pulse wave voltage.
n SAFETY STANDARDS
Type
UL
Compliance
UL 508
Contact rating
FTR-K1CK ( ) W
FTR-K1AK ( ) T
Flammability: UL 94-V0 (plastics)
E63614
16A, 277VAC/24VDC (resistive) 16A, 24VAC (resistive)
20A, 277VAC (resistive)
1 HP, 277VAC
CSA
VDE
C22.2 No. 14
LR 40304
16A, 277VAC (resistive)
20A, 277VAC (resistive)
1 HP, 277VAC
1/2 HP, 125VAC
1/8 HP, 125VAC
1/2 HP, 125VAC
TV-5, 120VAC 25,000 cycles
Pilot duty: A300
TV-5, 120VAC, 25,000 cycles
(only make contact)
Pilot duty: B300
0435, 0631, 0700, 0860,
40013848
16A, 250VAC (cosφ=1), 85˚C
3.5A, 250VAC (cosφ=0.4), 85˚C
16 A 24VDC (0ms), 85˚C
5A/80A, 250VAC 10,000 times, 85˚C (only make contact)
SEMKO EN 61058-1:1992 and A1
250VAC, 16 (3)A 40T85
EN 61095:1993 and A1+A11 5A/80A 250VAC 40T85 (only make contact)
Complies with NEMKO, DEMKO, FIMKO
3
FTR-K1 SERIES
n CHARACTERISTIC DATA
4
FTR-K1 SERIES
n DIMENSIONS
l
Schematics
(BOTTOM VIEW)
l
Dimensions
FTR-K1AK ( ) T
lPC board mounting
hole layout
(BOTTOM VIEW)
l
Schematics
(BOTTOM VIEW)
l
Dimensions
FTR-K1CK ( ) W
lPC board mounting
hole layout
(BOTTOM VIEW)
Unit: mm
5
FTR-K1 SERIES
RoHS Compliance and Lead Free Information
1. General Information
l
l
l
l
All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC
including amendments.
Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005.
(Amendment to Directive 2002/95/EC)
All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes
at: http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf
Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified.
This material has been verified to be compatible with PbSn assembly process.
2. Recommended Lead Free Solder Profile
l
Recommended solder Sn-3.0Ag-0.5Cu.
Flow Solder condition:
Pre-heating:
Soldering:
maximum 120˚C
dip within 5 sec. at
260˚C solder bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration:
maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated.
4. Tin Whiskers
l
Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length
whisker was found by our in house test.
6
FTR-K1 SERIES
Fujitsu Components International Headquarter Offices
Japan
Europe
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (81-3) 5449-7010
Tel: (31-23) 5560910
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Fax: (1-408) 745-4970
Tel: (65) 6375-8560
Email: components@us.fujitsu.com
Web: http://us.fujitsu.com/components
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
Web: http://www.fujitsu.com/sg/services/micro/components/
©2010 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for gen-
eral information purposes.
The use of the contents, data and information provided in this datasheet is at the users’ own risk.
Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehen-
sive, complete and up to date.
Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf
of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information
and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof.
Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility
or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for
particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy,
comprehensiveness, usefulness, availability and completeness thereof. Rev. July 28, 2010
7
相关型号：
FTR-K1AK024T-KS
Power/Signal Relay, SPST, Momentary, 0.017A (Coil), 24VDC (Coil), 400mW (Coil), DC Input, AC Output, Through Hole-Straight Mount, CADMIUM FREE AND ROHS COMPLIANT
FUJITSU
FTR-K1AK024T-RG
Power/Signal Relay, SPST, Momentary, 0.017A (Coil), 24VDC (Coil), 400mW (Coil), 16A (Contact), 24VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, CADMIUM FREE AND ROHS COMPLIANT
FUJITSU
FTR-K1AK024W-KW
Power/Signal Relay, POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.017A (COIL), 24VDC (COIL), 400mW (COIL), THROUGH HOLE-STRAIGHT MOUNT, CADMIUM FREE AND ROHS COMPLIANT
FUJITSU
©2020 ICPDF网 联系我们和版权申明