JV-48-KT [FUJITSU]
Power/Signal Relay, POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.006A (COIL), 48VDC (COIL), 300mW (COIL), 5A (CONTACT), 150VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT;型号: | JV-48-KT |
厂家: | FUJITSU |
描述: | Power/Signal Relay, POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.006A (COIL), 48VDC (COIL), 300mW (COIL), 5A (CONTACT), 150VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT PC 继电器 |
文件: | 总7页 (文件大小:432K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
POWER RELAY
1 POLE - 5A/10A Medium Load Control
JV Series
n FEATURES
l UL, CSA, VDE, SEMKO, CQC recognized
l UL class B (130°C) wire class
l Low profile and space saving
- Height: 12.5 mm
- Mounting space: 175 mm2
l High sensitivity in small package
- Operating power: 0.112 to 0.13 W
- Nominal power: 0.2 to 0.3 W
l High insulation with reinforced insulation system
(between coil and contacts)
- Insulation distance: 8 mm
- Dielectric strength: 5,000 VAC
- Surge strength: 10,000 V
l Plastic materials
- UL94 flame class V-0 -UL CTI level class 2
l Plastic sealed type, RTIII
l RoHS compliant.
Please see page 6 for more information
n PARTNUMBER INFORMATION
JV
-
12
S
- K
T
[Example]
(a) (*) (b) (c)
(d) (e)
(a)
(b)
Relay type
Coil rated voltage
JV
: JV Series
12
: 3....48VDC
Coil rating table at page 3
(c)
Coil rating
Nil
S
: Standard type (300mW) (not for -KS type)
: High sensitive type (200mW) (-KS type: 250mW)
(d)
(e)
Enclosure
K
: Plastic sealed type, RTIII
Construction
T
S
: High density mounting type
: High power type 10A
Note: Actual marking omits the hyphen (-) of (*)
1
JV SERIES
n SPECIFICATION
Item
High sensitive
type
High power
type
Standard type
JV - ( )
JV - ( ) S
JV- ( ) - KS
Contact
Data
Configuration
Construction
Material
1 form A (SPST-NO)
Single
Silver alloy AgNi + Au
Max. 70 mOhm at 6 VDC, 1 A
AgSnO2 + Au
Resistance (Initial)
5A, 250VAC / 30VDC (resistive
load)
10A, 250VAC /
24VDC
Contact rating
Max. carrying current
Max. switching voltage
5A
10A
250VAC / 150 VDC
2,500VA /
240W
Max. switching power
1,250VA / 150W
Max. switching current
Min. switching load *
Mechanical
5A
10A
100 mA, 5 VDC
Min. 5 x 106 operations
Life
Min. 50 x 103
operations
Electrical
Min. 100 x 103 operations
Coil Data
Rated power (at 20 °C)
300mW
130mW
200mW
113mW
250mW
145mW
Operate power (at 20 °C)
Operating temperature range
-40 °C to +70 °C (no frost)
Max. 8 ms (without bounce)
Max. 4 ms (no diode)
Min 1,000MOhm at 500VDC
750VAC, 1 min.
Timing Data Operate (at nominal voltage)
Release (at nominal voltage)
Insulation
Resistance (initial)
Dielectric strength
Open contacts
Contacts to coil
Coil to contacts
Misoperation
Endurance
5,000VAC, 1 min.
Surge strength
10,000V / 1.2 x 50µs standard wave
10 to 55Hz double amplitude 1.65 mm
10 to 55Hz double amplitude 5 mm
Min. 100m/s² (11 ± 1ms)
Other
Vibration resistance
Misoperation
Endurance
Shock
Min. 1,000m/s² (6 ± 1ms)
Weight
Sealing
Approximately 4.3 g
Plastic sealed RTIII
* Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual
load before production since reference values may vary according to switching frequencies, environmental contions
and expected reliability levels.
2
JV SERIES
n COIL RATING
Standard type (300 mW)
Rated Coil
Must Operate Must Release
Coil
Coil Resistance
Rated Power
(mW)
Voltage
(VDC)
Voltage
(VDC) *
Voltage
(VDC) *
Code
+/- 10% (Ohm)
3
5
3
5
30
83.3
120
1.98
3.3
0.15
0.25
0.3
6
6
3.96
5.94
7.9
300 mW
9
9
270
0.45
0.6
12
24
48
12
24
48
480
1,920
7,680
15.8
31.7
1.2
2.4
High sensitive type (200 mW)
Rated Coil
Must Operate Must Release
Coil
Coil Resistance
Rated Power
(mW)
Voltage
(VDC)
Voltage
(VDC) *
Voltage
(VDC) *
Code
+/- 10% (Ohm)
3
5
3
5
45
125
2.25
3.75
4.5
0.15
0.25
0.3
6
6
180
200 mW
9
9
405
6.75
9
0.45
0.6
12
18
24
12
18
24
720
1,620
2,880
13.5
18
0.9
1.2
Note: All values in the table are valid for 20°C and zero contact current.
* Specified operate values are valid for pulse wave voltage.
10A High power type (250 mW)
Rated Coil
Voltage
(VDC)
Must Operate Must Release
Coil
Code
Coil Resistance
+/- 10% (Ohm)
Rated Power
(mW)
Voltage
(VDC) *
Voltage
(VDC) *
3
5
3
5
36
100
2.1
3.5
0.3
0.5
0.6
0.9
1.2
1.8
2.4
6
6
144
4.2
250 mW
9
9
324
6.3
12
18
24
12
18
24
576
8.4
1,296
2,304
12.6
14.9
Note: All values in the table are valid for 20°C and zero contact current.
* Specified operate values are valid for pulse wave voltage.
3
JV SERIES
n SAFETY STANDARDS
Type
UL
Compliance
Contact rating
UL 508, UL 873
Flammability: UL 94-V0 (plastics)
5A, 250 VAC / 30 VDC (resistive)
1/8 HP, 125VAC/250VAC
Pilot duty: C300
E56140
CSA
VDE
C22.2 No. 14
LR 35579
0435, 0631, 0700
5A, 250VAC (cos φ1), 100K
2A, 250VAC (cos φ0.4), 100K
5A, 30VDC (omsec), 100K
10A, 250VAC (cos φ1), JV-KS, 25K
10A, 30VDC (0msec), JV-KS, 100K
40016247
Also complies with SEMKO, CQC.
Please contact sales office when SEMKO, CQC logo marking is neccessary on the cover.
n CHARACTERISTIC DATA
JV-KT
Life Curve
4
JV SERIES
n REFERENCE DATA
n DIMENSIONS
l
PC board mounting
hole layout
l
Dimensions
l
Schematics
(BOTTOM VIEW)
JV-KT type + JV-( )S-KS
(BOTTOM VIEW)
Unit: mm
5
JV SERIES
RoHS Compliance and Lead Free Information
1. General Information
l
l
l
l
All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC
including amendments.
Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005.
(Amendment to Directive 2002/95/EC)
All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes
at: http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf
Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified.
This material has been verified to be compatible with PbSn assembly process.
2. Recommended Lead Free Solder Profile
l
Recommended solder Sn-3.0Ag-0.5Cu.
Flow Solder condition:
Pre-heating:
Soldering:
maximum 120˚C
dip within 5 sec. at
260˚C solder bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration:
maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated.
4. Tin Whiskers
l
Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length
whisker was found by our in house test.
6
JV SERIES
Fujitsu Components International Headquarter Offices
Japan
Europe
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (81-3) 5449-7010
Tel: (31-23) 5560910
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Fax: (1-408) 745-4970
Tel: (65) 6375-8560
Email: components@us.fujitsu.com
Web: http://us.fujitsu.com/components
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
Web: http://www.fujitsu.com/sg/services/micro/components/
©2010 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for gen-
eral information purposes.
The use of the contents, data and information provided in this datasheet is at the users’ own risk.
Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehen-
sive, complete and up to date.
Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf
of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information
and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof.
Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility
or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for
particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy,
comprehensiveness, usefulness, availability and completeness thereof. Rev. August 04, 2010
7
相关型号:
JV-48S-KS
Power/Signal Relay, POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.01A (COIL), 24VDC (COIL), 250mW (COIL), 10A (CONTACT), 150VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT
FUJITSU
JV-48S-KT
Power/Signal Relay, POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.008A (COIL), 24VDC (COIL), 200mW (COIL), 5A (CONTACT), 150VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT
FUJITSU
JV-5-KS
Power/Signal Relay, POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.05A (COIL), 5VDC (COIL), 250mW (COIL), 10A (CONTACT), 150VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT
FUJITSU
JV-5-KT
Power/Signal Relay, POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.06A (COIL), 5VDC (COIL), 300mW (COIL), 5A (CONTACT), 150VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT
FUJITSU
JV-5S-KS
Power/Signal Relay, SPST, Momentary, 0.05A (Coil), 5VDC (Coil), 250mW (Coil), 10A (Contact), 150VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
FUJITSU
JV-5S-KT
Power/Signal Relay, POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.04A (COIL), 5VDC (COIL), 200mW (COIL), 5A (CONTACT), 150VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT
FUJITSU
JV-6-KS
Power/Signal Relay, POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.042A (COIL), 6VDC (COIL), 250mW (COIL), 10A (CONTACT), 150VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT
FUJITSU
JV-6-KT
Power/Signal Relay, POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.05A (COIL), 6VDC (COIL), 300mW (COIL), 5A (CONTACT), 150VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT
FUJITSU
JV-6S-KS
Power/Signal Relay, SPST, Momentary, 0.042A (Coil), 6VDC (Coil), 250mW (Coil), 10A (Contact), 150VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
FUJITSU
JV-6S-KT
Power/Signal Relay, POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.033A (COIL), 6VDC (COIL), 200mW (COIL), 5A (CONTACT), 150VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT
FUJITSU
JV-9-KS
Power/Signal Relay, POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.028A (COIL), 9VDC (COIL), 250mW (COIL), 10A (CONTACT), 150VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT
FUJITSU
JV-9-KT
Power/Signal Relay, POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.033A (COIL), 9VDC (COIL), 300mW (COIL), 5A (CONTACT), 150VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT
FUJITSU
©2020 ICPDF网 联系我们和版权申明