JY-24-K [FUJITSU]

Power/Signal Relay, SPST, Momentary, 0.008A (Coil), 24VDC (Coil), 200mW (Coil), 3A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT;
JY-24-K
型号: JY-24-K
厂家: FUJITSU    FUJITSU
描述:

Power/Signal Relay, SPST, Momentary, 0.008A (Coil), 24VDC (Coil), 200mW (Coil), 3A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT

文件: 总8页 (文件大小:344K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
POWER RELAY  
1 POLE - 3, 5A Medium Load Control  
JY Series  
n FEATURES  
l UL, CSA, VDE recognized  
l High sensitivity and low power consumption  
l High insulation  
l Wide operating range  
l DIL pitch terminals  
l Plastic sealed type, RTIII  
l Socket mounting type and socket available  
l Compatible with solid state relays type SJ  
l RoHS compliant.  
Please see page 7 for more information  
n PARTNUMBER INFORMATION  
JY - 12  
H
E -  
K
P*  
[Example]  
(a)  
(b) (c) (d)  
(e) (f)  
(a)  
(b)  
Relay type  
JY  
12  
: JY Series  
Coil rated voltage  
: 4.5....48VDC  
Coil rating table at page 3  
(c)  
(d)  
Contact style  
Nil  
H
W
: 3A (Single contact)  
: 5A (Single contact)  
: 3A (Bifurcated contact)  
Contact material  
Nil  
Nil  
E
: Gold-plate silver cadmium oxide (single contact type)  
: Gold overlay silver alloy (bifurcated contact type)  
: Silver cadmium oxide (single contact type)  
(e)  
(f)  
Enclosure  
K
: Plastic sealed type, RTIII  
Terminal type  
Nil  
P
: PC board mounting type  
: Socket mounting type (without JY-W)  
Note: Actual marking omits the hyphen (-) of (*)  
1
JY SERIES  
n SPECIFICATION  
Item  
3A Type  
5A Type  
JY - ( ) W  
JY - ( )  
JY - ( ) E JY - ( ) H  
JY - ( ) HE  
Contact  
Data  
Configuration  
Construction  
1 form A (SPST-NO)  
Bifurcated Single  
Gold-over- Gold-plate  
Silver  
cadmium silver cad-  
oxide mium oxide  
Gold-plate  
lay silver  
alloy  
silver  
cadmium  
oxide  
Silver cad-  
mium oxide  
Material  
AgNi  
Max. 100 Max. 30  
mOhm mOhm  
Max. 100  
mOhm  
Resistance (initial) (at 6 VDC, 1A)  
Max. 30 mOhm  
Contact rating  
3A, 250VAC / 30VDC  
5A, 250VAC / 30VDC  
Max. carrying current  
Max. switching voltage  
Max. switching power  
Max. switching current  
5A  
250VAC / 150 VDC  
750VA, 90W  
3A  
1,250VA, 150W  
0.1mA  
100 mVDC 5VDC  
10mA  
100mA  
5VDC  
10mA  
5VDC  
100mA  
5VDC  
Min. switching load *  
Life  
Mechanical  
Min. 20 x 106 operations  
Electrical  
Min. 100 x 103 operations (contact rating)  
200 mW (48V type: 360 mW)  
100 mW (48V type: 170 mW)  
-40 °C to +90 °C (no frost) (48V type: +80 °C)  
Max. 6 ms (without bounce)  
Max. 3 ms (no diode)  
Coil Data  
Rated power (at 20 °C)  
Operate power (at 20 °C)  
Operating temperature range  
Timing Data Operate (at nominal voltage)  
Release (at nominal voltage)  
Insulation  
Resistance (initial)  
Dielectric strength  
Min. 1,000MOhm at 500VDC  
750VAC, 1min  
Open contacts  
Contacts to coil  
Coil to contacts  
Misoperation  
Endurance  
2,000VAC, 1min  
Surge strength  
4,000V / 1.2 x 50µs standard wave  
10 to 55Hz double amplitude 1.5 mm  
10 to 55Hz double amplitude 4.5 mm  
Min. 100m/s² (11 ± 1ms)  
Other  
Vibration resistance  
Misoperation  
Endurance  
Shock  
Min. 1,000m/s² (6 ± 1ms)  
Weight  
Sealing  
Approximately 5 g  
Plastic sealed, RTIII  
* Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual  
load before production since reference values may vary according to switching frequencies, environmental contions  
and expected reliability levels.  
2
JY SERIES  
n COIL RATING  
Coil  
Code  
Coil  
Code  
Rated Coil  
Voltage  
(VDC)  
Must Operate Must Release-  
Coil Resistance  
+/- 10% (Ohm)  
Rated Power  
(mW)  
Voltage  
(VDC) *  
Voltage  
(VDC) *  
5A type 3A type  
4.5  
5
4.5  
5
4.5  
5
100  
125  
3.1  
3.5  
0.23  
0.25  
0.3  
6
6
6
180  
4.2  
200  
9
9
9
405  
6.3  
0.45  
0.6  
12  
18  
24  
48  
101  
105  
107  
12  
18  
24  
48  
-
12  
18  
24  
48  
23.5  
12  
5
720  
8.4  
1,620  
2,880  
6,400  
2,760  
720  
12.6  
16.8  
32.6  
15.5  
8.4  
0.9  
1.2  
2.4  
360  
200  
1.18  
0.6  
-
-
125  
3.5  
0.25  
Note: All values in the table are valid for 20°C and zero contact current.  
* Specified operate values are valid for pulse wave voltage.  
n SAFETY STANDARDS  
Type  
UL  
Compliance  
UL 508  
Contact rating  
Flammability: UL 94-V0 (plastics)  
[JY-H, JY-HE]  
E56140  
5A, 250 VAC / 30 VDC (resistive)  
1/8 HP, 125VAC, 250 VAC  
Pilot duty code C150  
CSA  
C22.2 No. 14  
LR 35579  
[JY, JY-W, JY-E]  
3A, 250 VAC / 30 VDC (resistive)  
1/10 HP, 125VAC, 250 VAC  
Pilot duty: C150  
VDE  
(JY..W-K  
type)  
VDE 0435 part 201  
3A, 250VAC, cos φ1, 100K  
3A, 30VDC, 0msec. 100K  
3
JY SERIES  
n CHARACTERISTIC DATA  
n REFERENCE DATA  
4
JY SERIES  
5
JY SERIES  
n DIMENSIONS  
6
JY SERIES  
RoHS Compliance and Lead Free Information  
1. General Information  
l
l
l
l
All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC  
including amendments.  
Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005.  
(Amendment to Directive 2002/95/EC)  
All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes  
at: http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf  
Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified.  
This material has been verified to be compatible with PbSn assembly process.  
2. Recommended Lead Free Solder Profile  
l
Recommended solder Sn-3.0Ag-0.5Cu.  
Flow Solder condition:  
Pre-heating:  
Soldering:  
maximum 120˚C  
dip within 5 sec. at  
260˚C solder bath  
Solder by Soldering Iron:  
Soldering Iron  
Temperature: maximum 360˚C  
Duration:  
maximum 3 sec.  
We highly recommend that you confirm your actual solder conditions  
3. Moisture Sensitivity  
l
Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated.  
4. Tin Whiskers  
l
Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length  
whisker was found by our in house test.  
7
JY SERIES  
Fujitsu Components International Headquarter Offices  
Japan  
Europe  
Fujitsu Component Limited  
Gotanda-Chuo Building  
3-5, Higashigotanda 2-chome, Shinagawa-ku  
Tokyo 141, Japan  
Fujitsu Components Europe B.V.  
Diamantlaan 25  
2132 WV Hoofddorp  
Netherlands  
Tel: (81-3) 5449-7010  
Tel: (31-23) 5560910  
Fax: (81-3) 5449-2626  
Email: promothq@ft.ed.fujitsu.com  
Web: www.fcl.fujitsu.com  
Fax: (31-23) 5560950  
Email: info@fceu.fujitsu.com  
Web: emea.fujitsu.com/components/  
North and South America  
Fujitsu Components America, Inc.  
250 E. Caribbean Drive  
Sunnyvale, CA 94089 U.S.A.  
Tel: (1-408) 745-4900  
Asia Pacific  
Fujitsu Components Asia Ltd.  
102E Pasir Panjang Road  
#01-01 Citilink Warehouse Complex  
Singapore 118529  
Fax: (1-408) 745-4970  
Tel: (65) 6375-8560  
Email: components@us.fujitsu.com  
Web: http://us.fujitsu.com/components  
Fax: (65) 6273-3021  
Email: fcal@fcal.fujitsu.com  
Web: http://www.fujitsu.com/sg/services/micro/components/  
©2010 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective  
owners.  
The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for gen-  
eral information purposes.  
The use of the contents, data and information provided in this datasheet is at the users’ own risk.  
Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehen-  
sive, complete and up to date.  
Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf  
of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information  
and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof.  
Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility  
or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for  
particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy,  
comprehensiveness, usefulness, availability and completeness thereof. Rev. August 6, 2010.  
8

相关型号:

JY-24-K-UL

Power/Signal Relay,
FUJITSU

JY-24E-KP

Power/Signal Relay, SPST, Momentary, 0.008A (Coil), 24VDC (Coil), 200mW (Coil), 3A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Socket Mount, ROHS COMPLIANT
FUJITSU

JY-24E-KP-UL

Power/Signal Relay,
FUJITSU

JY-24G-KP

Power/Signal Relay
FUJITSU

JY-24G-KP-UL

Power/Signal Relay
FUJITSU

JY-24H-K

Power/Signal Relay, 1 Form A, SPST, Momentary, 0.008A (Coil), 24VDC (Coil), 200mW (Coil), 5A (Contact), 30VDC (Contact), DC Input, Random, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
FUJITSU

JY-24H-K-UL

Power/Signal Relay,
FUJITSU

JY-24H-KP

Power/Signal Relay, SPST, Momentary, 0.008A (Coil), 24VDC (Coil), 200mW (Coil), 5A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Socket Mount, ROHS COMPLIANT
FUJITSU

JY-24H-KP-UL

Power/Signal Relay,
FUJITSU

JY-24HE-K

Power/Signal Relay, SPST, Momentary, 0.008A (Coil), 24VDC (Coil), 200mW (Coil), 5A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
FUJITSU

JY-24HE-K-UL

Power/Signal Relay,
FUJITSU

JY-24HE-KP

Power/Signal Relay, SPST, Momentary, 0.008A (Coil), 24VDC (Coil), 200mW (Coil), 5A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Socket Mount, ROHS COMPLIANT
FUJITSU