M3DA-97M200-D001 [FUJITSU]
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 92.34 MHz - 102.06 MHz, COMPACT, HERMETICALLY SEALED, METAL, DIP-5;型号: | M3DA-97M200-D001 |
厂家: | FUJITSU |
描述: | VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 92.34 MHz - 102.06 MHz, COMPACT, HERMETICALLY SEALED, METAL, DIP-5 振荡器 |
文件: | 总4页 (文件大小:53K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
October 1990
Edition 1.0
DATA SHEET
M3 Series
PIEZOELECTRIC DEVICE
VOLTAGE CONTROLLED OSCILLATOR
DESCRIPTION
The M3 series voltage control led oscillators (VCO) operate in the frequency
range of 50 to 300 MHz. The M3 series VCOs use a single LiTaO (lithium tanta-
3
late) piezoelectric crystal with a high electromechanical coupling coefficient and a
SAW resonatorthat has an original configuration. The M3series VCOs oscillate
directly in the VHF band up to 300 MHz, and have a wide variable frequency width
and high temperature stability.
FEATURES
•
•
•
•
•
•
•
•
•
Direct oscillation at high frequencies: 50 to 300 MHz
Wide variable frequency width: 800 ppm/V minimum (0.5 to 4.5 V)
Superb temperature characteristics: Within +200 ppm (0 to 60°C)
High-precision oscillation frequency, ready for use without adjustment
High reliability due to hermetically sealed package
Metal Case
DIP-14
High carrier noise ratio: -90 dB or less (12.5 kHz detuning, 8 kHz band)
Compact size: Compatible with 1 DIP IC packages
Frequency offset by built-in offset terminal
Three types of standard frequencies available
ABSOLUTE MAXIMUM RATINGS (See Note)
Parameter
Power Supply Voltage
Input Control Voltage
Operating Temperature
Storage Temperature
Control Polarity
Symbol
VCC
Ratings
-0.5 to 7.0
-0.5 to 7.0
0 to 60
Unit
V
VIN2
Ta
V
Bottom View
°C
°C
Terminal Terminal
TSTG
-40 to 85
Description
No.
Name
VIN1
GND
Positive Polarity
50 to 300
1
Offset Terminal
Oscillation Frequency Range
MHz
7
Grounding Terminal
Oscillation Output
Terminal
RECOMMENDED OPERATING CONDITIONS
8
9
VOUT
VCC
Parameter
Power Supply Voltage
Input Control Voltage
Operating Temperature
Symbol
VCC
Ratings
5.0
Unit
V
Power Supply
Terminal
Control Voltage
Input Terminal
VIN2
Ta
0.5 to 4.5
0 to 60
V
16
VIN2
°C
This device contains circuitry to protect the inputs against dam-
age due to high static voltages or electric fields. However, it is
advised that normal precautions he taken to avoid application of
any voltage higher than maximum rated voltages to this high
impedance CCircuit.
Note: Permanent device damage may occur if absolute maximum ratings are exceeded.
Functional operation should be restricted to the conditions as detailed in the opera-
tion sections of this data sheet. Exposure to absolute maximum rating conditions for
extended periods may affect device reliability.
© 1990 by FUJITSU LIMITED.
M3 Series (D001)
STANDARD FREQUENCIES
Frequency
74.25 MHz
97.2 MHz
Application
Part Number
Professional HDTV
Transmission Standard HDTV
Broad-band ISDN
M3DA-74M250-D001
M3DA-97M200-D001
M3DA-155M52-D001
115.52 MHz
ELECTRICAL CHARACTERISTICS
Ratings
Typical
—
Item
Symbol
Condition
Unit
Remarks
Minimum
Maximum
Oscillation Frequency Deviation
Af
VIN2 = 2.5 V
-500
+500
—
ppm
f0 reference
0
Variable Width of Oscillation
Frequency
VIN2 = 0.5 V
VIN2 = 4.5 V
(fH — fL)
800
—
ppm/V
Temprature Stability of
Oscillation Frequency
25C reference,
Ta = 0 to 60 C
f (Ta)
POUT
P (VF)
VIN2 = 2.5 V
-200
0
—
5
+200
7
ppm
dBm
dB
Output Level
VIN2 = 2.5 V
50 R termination
VIN2 = 0.5 V
VIN2 = 4.5 V
VIN2 = 2.5 V
reference
Output Level Stability
-2
—
+2
Output Level Temperature
Stability
25C reference,
Ta = 0 to 60C
P (Ta)
ICC
VIN2 = 2.5 V
—
-2
—
—
—
+2
30
dB
mA
Current Consumption
Oscillation Frequency Power
Supply Voltage Fluctuation
VCC = % v refer-
ence, 5%
bf (VcCC)
VIN2 = 2.5 V
—50
+50
ppm
STANDARD CHARACTERISTICS
The examples below show characteristics of the M3 VCO devices at 155.52 MHz.
Example 1. Frequency Variable Characteristics
2
M3 Series (D001)
STANDARD CHARACTERISTICS (Continued)
Example 2. Temperature Characteristics
Example 3. Oscillation Spectrum
3
M3 Series (D001)
PART NUMBERING SYSTEM
(Part Number Example)
M3DA - ❏❏❏❏❏❏ - D ❏❏❏
➊
➋
➊
Frequency Designation: Designate the nominal frequency in six alphanumeric characters.
M indicates the decimal point in MHz.
Frequency
74.25 MHz
97.2 MHz
Destination
74M250
97M200
115.52 MHz
115M52
➋ Serial Number (of the Series): Standard: 100
Non-Standard porducts: 001 to 099
PACKAGE DIMENSIONS
4
相关型号:
©2020 ICPDF网 联系我们和版权申明