MB40C368PFV [FUJITSU]
A/D Converter (1-channel, 8-bit, 18MHz); A / D转换器（ 1路， 8位， 18MHz的）
| 型号： | MB40C368PFV |
| 厂家： | 
FUJITSU |
| 描述： | A/D Converter (1-channel, 8-bit, 18MHz) |
| 文件： | 总10页 (文件大小：121K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
FUJITSU SEMICONDUCTOR
DATA SHEET
DS04-28208-2E
ASSP for Image Processing
CMOS
A/D Converter
(1-channel, 8-bit, 18MHz)
MB40C368
■ DESCRIPTION
The MB40C368 is a high-speed A/D converter using high-speed CMOS process technology.
■ FEATURES
• Resolution: 8 bits
• Linearity error: ±0.20% (Typ.)
• Maximum conversion rate: 18 MSPS (Min.)
• Power supply voltage: Analog section +3.0 V
Digital section +3.0 V
• Digital input voltage range: TTL level
• Digital output voltage range: CMOS level compatible
• Analog input voltage range: 0.5 to 3 V (with 2 Vp-p)
• Analog input capacity: 15 pF (Typ.)
• Power consumption: 14 mW (Typical: @fCLK = 18 MHz)
• Additional function: Reference voltage generator circuit: VREFB = 1 V
• Package options: SOP24, SSOP24
■ PACKAGES
24-pin, Plastic SOP
24-pin, Plastic SSOP
(FPT-24P-M01)
(FPT-24P-M03)
This device contains circuitry to protect the inputs against damage due to high static voltages or electric fields. However, it is advised that normal precautions
be taken to avoid application of any voltage higher than maximum rated voltages to this high impedance circuit.
MB40C368
■ PIN ASSIGNMENT
(TOP VIEW)
1
2
24
23
AVDD
AVDD
AVSS
(LSB) D8
D7
AVSS
VRB
3
4
5
6
22
21
20
19
VREFB
VINA
N.C.
VRT
D6
D5
AVDD
AVSS
7
8
18
17
D4
D3
9
16
15
14
13
AVDD
AVSS
CLK
DVDD
10
11
12
D2
(MSB) D1
DVSS
(FPT-24P-M01)
(FPT-24P-M03)
■ PIN DESCRIPTION
Pin No.
Pin name
Functions
1, 2, 16, 18
AVDD
DVDD
AVSS
DVSS
D1 to D8
CLK
Analog power supply pins (+3 V)
Digital power supply pin (+3 V)
Analog power ground pins (0 V)
Digital power ground pin (0 V)
13
3, 15, 17, 24
12
4 to 11
14
Digital output pins. D1: MSB, D8: LSB
Clock input pin
21
VINA
Analog input pin. Input range: VRB to VRT (2 Vp-p between 0.5 to 3 V)
Reference voltage input pin (3 V)
19
VRT
23
VRB
Reference voltage input pin (1 V)
Reference voltage output pin. When connected to VRB, the pin generates
0.33 × AVDD (1 V).
22
20
VREFB
N. C.
No connection pin.
Should be connected to AVDD.
Values within ( ) are typical values.
■ NOTES ON USE
• Be sure to bypass the AVDD, DVDD, VRT and VRB pins to the ground using a high-frequency capacitor.
The high-frequency capacitor should be connected as near the pin as possible.
• Provide four clocks or more immediately after the power up to prevent current dissipation due to the
indeterminate internal logic.
2
MB40C368
■ ABSOLUTE MAXIMUM RATINGS (See WARNING)
Rating
Parameter
Symbol
Unit
Min.
Max.
Power supply voltage
Input voltage
AVDD, DVDD
–0.3
0.7
V
CLK, VINA
VRT, VRB
–0.3
AVDD+0.3
V
Output voltage
D1 to D8
Tstg
–0.3
–55
DVDD+0.3
+125
V
Storage temperature
°C
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
■ RECOMMENDED OPERATING CONDITIONS
Value
Parameter
Symbol
Unit
Min.
2.70
VRB
–
Typ.
Max.
3.60
VRT
AVDD
–
Power supply voltage
AVDD, DVDD
VINA
3.00
V
V
Analog input voltage
–
–
Analog reference voltage: T
Analog reference voltage: B
Analog reference voltage range
Digital "H” level input voltage
Digital “L” level input voltage
Digital input current
VRT
V
VRB
0.50
1.90
2.4
–
–
V
VRT–VRB
VIHD
VILD
2.00
–
2.10
–
V
V
–
0.8
5
V
IID
–
–
µA
MHz
ns
ns
°C
Clock frequency
fCLK
0.1
22.5
22.5
–20
–
18
tw+
Minimum “H” level clock pulse width
Minimum “L” level clock pulse width
Operating temperature range
–
–
tw–
–
–
Ta
–
70
WARNING: Recommended operating conditions are normal operating ranges for the semiconductor device. All
the device’s electrical characteristics are warranted when operated within these ranges.
Always use semiconductor devices within the recommended operating conditions. Operation outside
these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representative beforehand.
3
MB40C368
■ ELECTRICAL CHARACTERISTICS
DC Characteristics
(1) Analog section
(AVDD = DVDD = 2.70 V to +3.60 V, Ta = –20°C to +70°C)
Value
Parameter
Symbol
Unit
Min.
Typ.
8
Max.
–
Resolution
–
–
bit
%
Linearity error
LE
–
±0.20
±0.12
15
±0.30
±0.20
–
DC precision
Differential linearity error
DLE
CINA
VREFB
IRB
–
%
Analog input capacity
Reference voltage
–
pF
V
–
–16.0
–
0.33 × AVDD
–8.0
–
Reference current
–2.0
10.0
6.0
mA
mA
mA
Analog power supply current
Digital power supply current
AIDD
DIDD
2.2
–
2.5
(2) Digital section
(AVDD = DVDD = 2.70 V to +3.60 V, Ta = –20°C to +70°C)
Value
Parameter
Symbol
Unit
Min.
2.4
–
Typ.
Max.
DVDD
0.4
Digital “H” level output voltage
Digital “L” level output voltage
Digital “H” level output current
Digital “L” level output current
VOHD
VOLD
IOH
–
–
–
–
V
V
–400
–
–
µA
mA
IOL
1.6
(3) Switching section
(AVDD = DVDD = 2.70 V to +3.60 V, Ta = –20°C to +70°C)
Value
Parameter
Symbol
Unit
Min.
18
Typ.
Max.
–
Maximum conversion rate
Digital output delay time
fs
–
6
MSPS
ns
tpd
0
25
4
MB40C368
■ EQUIVALENT CIRCUIT
• Clock input
AVDD
AVSS
AVDD
AVSS
CLK
• Analog input
VINA
• Reference voltage input
AVDD
AVSS
AVDD
AVSS
VRT
VRB
• Reference voltage output
AVDD
VREFB
AVSS
• Digital output
DVDD
DVSS
D1 to D8
5
MB40C368
■ TIMING CHART
+
–
tw
tw
3 V
CLK
1.5 V
0 V
SAMPLEN
SAMPLEN+1
VINA
tpd
VOH
D1 to D8
DATAN–2
DATAN–1
DATAN
0.5 DVDD
VOL
■ DIGITAL OUTPUT BUFFER LOAD CIRCUIT
To measurement pin
Measurement point
CL = 15 pF
DVSS
(Note) CL value includes the floating capacitance of the jig and probe.
6
MB40C368
■ ORDERING INFORMATION
Part number
Package
Remarks
24-pin, Plastic SOP
(FPT-24P-M01)
MB40C368PF
24-pin, Plastic SSOP
(FPT-24P-M03)
MB40C368PFV
7
MB40C368
■ PACKAGE DIMENSIONS
24-pin, Plastic SOP
(FPT-24P-M01)
2.25(.089)MAX
(MOUNTING HEIGHT)
+.010
15.24+–00..2205 .600–.008
0.05(.002)MIN
(STAND OFF)
+0.40
6.80 –0.20
5.30±0.30
7.80±0.40
INDEX
+.016
(.209±.012) (.307±.016)
.268–.008
+0.05
1.27(.050)
TYP
0.45±0.10
(.018±.004)
0.15–0.02
0.50±0.20
(.020±.008)
M
Ø0.13(.005)
+.002
.006–.001
Details of "A" part
0.20(.008)
"A"
0.50(.020)
0.10(.004)
13.97(.550)REF
0.18(.007)MAX
0.68(.027)MAX
C
1994 FUJITSU LIMITED F24007S-3C-4
Dimensions in mm (inches).
(Continued)
8
MB40C368
(Continued)
24-pin, Plastic SSOP
*: These dimensions do not include resin protrusion.
(FPT-24P-M03)
1.25 –+00..1200
*
7.75±0.10(.305±.004)
(MOUNTING HEIGHT)
.049+–..000048
0.10(.004)
*
5.60±0.10
7.60±0.20
6.60(.260)
NOM
(.220±.004) (.299±.008)
INDEX
"A"
0.22–+00..0150
.009–+..000024
0.15–+00..0025
Details of "A" part
0.10±0.10(.004±.004)
0.65±0.12(.0256±.0047)
.006–+..000012
(STAND OFF)
7.15(.281)REF
0 to 10°
°
0.50±0.20
(.020±.008)
C
1994 FUJITSU LIMITED F24018S-2C-2
Dimensions in mm (inches).
9
MB40C368
FUJITSU LIMITED
For further information please contact:
Japan
FUJITSU LIMITED
Corporate Global Business Support Division
Electronic Devices
KAWASAKI PLANT, 4-1-1, Kamikodanaka
Nakahara-ku, Kawasaki-shi
Kanagawa 211-88, Japan
Tel: (044) 754-3763
All Rights Reserved.
The contents of this document are subject to change without
notice. Customers are advised to consult with FUJITSU sales
representatives before ordering.
Fax: (044) 754-3329
The information and circuit diagrams in this document presented
as examples of semiconductor device applications, and are not
intended to be incorporated in devices for actual use. Also,
FUJITSU is unable to assume responsibility for infringement of
any patent rights or other rights of third parties arising from the
use of this information or circuit diagrams.
North and South America
FUJITSU MICROELECTRONICS, INC.
Semiconductor Division
3545 North First Street
San Jose, CA 95134-1804, U.S.A.
Tel: (408) 922-9000
FUJITSU semiconductor devices are intended for use in
standard applications (computers, office automation and other
office equipment, industrial, communications, and measurement
equipment, personal or household devices, etc.).
CAUTION:
Customers considering the use of our products in special
applications where failure or abnormal operation may directly
affect human lives or cause physical injury or property damage,
or where extremely high levels of reliability are demanded (such
as aerospace systems, atomic energy controls, sea floor
repeaters, vehicle operating controls, medical devices for life
support, etc.) are requested to consult with FUJITSU sales
representatives before such use. The company will not be
responsible for damages arising from such use without prior
approval.
Fax: (408) 432-9044/9045
Europe
FUJITSU MIKROELEKTRONIK GmbH
Am Siebenstein 6-10
63303 Dreieich-Buchschlag
Germany
Tel: (06103) 690-0
Fax: (06103) 690-122
Asia Pacific
FUJITSU MICROELECTRONICS ASIA PTE. LIMITED
#05-08, 151 Lorong Chuan
New Tech Park
Singapore 556741
Tel: (65) 281-0770
Fax: (65) 281-0220
Any semiconductor devices have inherently a certain rate of
failure. You must protect against injury, damage or loss from
such failures by incorporating safety design measures into your
facility and equipment such as redundancy, fire protection, and
prevention of over-current levels and other abnormal operating
conditions.
If any products described in this document represent goods or
technologies subject to certain restrictions on export under the
Foreign Exchange and Foreign Trade Control Law of Japan, the
prior authorization by Japanese government should be required
for export of those products from Japan.
F9703
FUJITSU LIMITED Printed in Japan
相关型号：
©2020 ICPDF网 联系我们和版权申明