MB86064PB-GE1 [FUJITSU]

Dual 14-bit 1GSa/s DAC Development Kit; 双14位1GSa / s的DAC的开发工具包


型号：	MB86064PB-GE1
厂家：	FUJITSU
描述：	Dual 14-bit 1GSa/s DAC Development Kit 双14位1GSa / s的DAC的开发工具包转换器数模转换器
文件：	总4页 (文件大小：276K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Product Flyer

Mixed Signal Division

January 2008

Version 2.1

DK86064-2

FME/MS/DAC80/FL_2/5084

Dual 14-bit 1GSa/s DAC Development Kit

Features

Description

• Development kit for MB86064

• MB86064 Evaluation Board

• PC USB Programming Cable

• PC control software supplied on CD

- Win2000/XP compatible

The DK86064-2 development kit provides a

simple and effective means of evaluating the

MB86064 dual 14-bit 1GSa/s Digital to Analog

Converter (DAC).

• User Manual

A user manual provides a step-by-step guide

from configuring the board and connecting test

equipment, through to evaluating the MB86064

performance. Schematics, PCB overlays and

• SMA data adaptors (optional)

• Provides easy access to on-chip waveform connector pin-outs are included. The evaluation

memories to perform initial performance tests, platform requires two DC power supplies, 1.8V &

avoiding need for high performance data 3.3V, each capable of providing 1 amp.

generating equipment

The PC USB programming cable and control

software is included to configure and control the

device, as well as download test vectors to the

waveform memory module.

DK86064-2 Evaluation Platform

Production

Page 1 of 4

Disclaimer: The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before

ordering.The information and circuit diagrams in this document are presented “as is”, no license is granted by implication or otherwise.

January 2008 Version 2.1

FME/MS/DAC80/FL_2/5084

DK86064-2 Dual 14-bit 1GSa/s DAC Development Kit

programming cable supplied. Even if high speed

Essential Equipment

digital pattern generating equipment is available,

initial testing using the waveform memories

serves as a useful setup check.

Apart from the power supplies, the minimum

equipment vital to conducting an evaluation of

the MB86064 is a high quality RF clock and

spectrum analyser. The phase & spurious

performance of the clock should be such as to

not limit the DAC performance (e.g. HP8664A).

However, performance of even the best

spectrum analysers available is inferior to that of

the converter. To overcome this, filtering

techniques and careful attention to analyser

settings, e.g. RF Attenuation, is essential during

the course of the evaluation.

Pattern

generators

can be connected to

the evaluation board

using either the on-

board 2-row 0.1" data

headers, or via ribbon

cables to the optional

SMA adaptors. When

using the 0.1" data

headers it is assumed

that a custom wiring

harness

will

required. This would

be made according to

the connector type

and pinout of the

generator’s

output.

The optional SMA

adaptors provide a convenient conversion from

SMA to the evaluation board’s 0.1" headers. This

alleviates the simultaneous removal of 28 SMAs

(14-bit differential LVDS) when required to be

disconnected. One advantage of this is the ability

to easily swap the data generator between DAC

data ports if insufficient channels are available to

drive both ports simultaneously.

Rather than using general purpose test

equipment, customers may wish to use the

evaluation board to construct a platform more

representative of their end application. This

might, for example, involve an FPGA to

implement a variety of pre-processing and/or

waveform generation functions. At the simplest

level, a setup similar to that described for the

digital pattern generator could be used, where a

custom wiring harness interfaces a standard or

existing FPGA platform to the DAC evaluation

board. Control of the DAC from the PC software

can be maintained to minimise effort to get up

and running.

Driving the DAC

As with any DAC evaluation an appropriate test

vector stimulus is required. Unfortunately at data

rates above 300MSa/s this requires digital

pattern generation capabilities beyond most

standard test equipment. The DK86064-2

Development Kit has been designed to help

overcome this difficulty in a number of ways.

Initially, unmodulated or pseudo-modulated

single and multi-tone/carrier tests can be

conducted using waveforms downloaded to the

on-chip memories.

Test waveforms are easily loaded into the

memories using the PC software and USB

Page 2 of 4

Production

Disclaimer: The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before

ordering.The information and circuit diagrams in this document are presented “as is”, no license is granted by implication or otherwise.

January 2008 Version 2.1

FME/MS/DAC80/FL_2/5084

DK86064-2 Dual 14-bit 1GSa/s DAC Development Kit

Clock Inputs & Analog Outputs Ordering Information

The evaluation board is designed to

Part

Order Reference

accommodate up to six SMA connectors - two for

the differential clock input and four for the two

differential analog outputs. Boards are supplied

with transformers on-board to perform single

ended-to-differential and differential-to-single

ended conversions. As such, only three SMAs

are required. This facilitates easier connection to

standard test equipment for evaluation.

Complete Development DK86064-2

Kit (includes Evaluation

Board with device fitted,

PC USB Programming

Cable & Control Software

and User Manual)

SMA Adaptors (optional) DK86064-1-SMA

PC Control Software

PC USB Programming

Cable & Control

Software

DKUSB-1

To simplify control & configuration of the

MB86064 during evaluation the development kit

includes a PC USB programming cable and

software utility. The programming cable

interfaces between a host PC’s USB port and the

4-wire serial interface implemented on the

device. Software is supplied on CD.

MB86064 Device

(RoHS-6 compliant)

MB86064PB-GE1

DK86064-2 User Manual Contact Fujitsu

MB86064 Data sheet

emea.fujitsu.com

Production

Page 3 of 4

Disclaimer: The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before

ordering.The information and circuit diagrams in this document are presented “as is”, no license is granted by implication or otherwise.

January 2008 Version 2.1

FME/MS/DAC80/FL_2/5084

DK86064-2 Dual 14-bit 1GSa/s DAC Development Kit

Worldwide Headquarters

Japan

Asia

Tel: +81 44 754 3753

Fax: +81 44 754 3329

Tel: +65 281 0770

Fax: +65 281 0220

Fujitsu Limited

Kamikodanaka 4-1-1

Nakahara-ku

Fujitsu Microelectronics Asia Pte Ltd

151 Lorong Chauan

New Tech Park

Kawasaki-shi

#05-08

Kanagawa-ken 211-8588

Japan

Singapore 556741

http://www.fujitsu.com

http://www.fujitsu.com/sg

USA

Europe

Tel: +1 408 737 5600

Fax: +1 408 737 5999

Fujitsu Microelectronics America, Inc. Tel: +49 6103 6900

Fujitsu Microelectronics Europe GmbH

Fax: +49 6103 690122

1250 E. Arques Avenue, M/S 333

Sunnyvale, CA 94088-3470

USA

Pittlerstrasse 47

D-63225 Langen

Germany

Tel: +1 800 866 8608 Customer Response Center

Fax: +1 408 737 5984 Mon-Fri: 7am-5pm (PST)

http://www.fujitsu.com/us

http://emea.fujitsu.com/microelectronics

The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales

representatives before ordering.

The information and circuit diagrams in this document presented as examples of semiconductor device applications, and are not

intended to be incorporated in devices for actual use. Also, FUJITSU is unable to assume responsibility for infringement of any patent

rights or other rights of third parties arising from the use of this information or circuit diagrams. No license is granted by implication

or otherwise under any patent or patent rights of Fujitsu Microelectronics Europe GmbH.

FUJITSU semiconductor devices are intended for use in standard applications (computers, office automation and other office

equipment, industrial, communications, and measurement equipment, personal or household devices, etc.).

CAUTION: Customers considering the use of our products in special applications where failure or abnormal operation may directly

affect human lives or cause physical injury or property damage, or where extremely high levels of reliability are demanded (such as

aerospace systems, atomic energy controls, sea floor repeaters, vehicle operating controls, medical devices for life support, etc.)

are requested to consult with FUJITSU sales representatives before such use. The company will not be responsible for damages

arising from such use without prior approval.

Any semiconductor devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such

failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention

of over-current levels and other abnormal operating conditions.

If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign

Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export

of those products from Japan.

FME/MS/DAC80/FL_2/5084 2.1

Page 4 of 4

Production

Disclaimer: The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before

ordering.The information and circuit diagrams in this document are presented “as is”, no license is granted by implication or otherwise.

MB86064PB-GE1 [FUJITSU]

相关型号：

MB86064_09

MB86065

MB86065PB-G

MB86065PB-G-K1

MB86065PB-G-K1E1

MB86065PB-GE1

MB86101BAN

MB86101BBN

MB86101CAN

MB86101CBN

MB86101DAN

MB86101DBN